Nanofabrication techniques in large-area molecular electronic devices

The societal impact of the electronics industry is enormous-not to mention how this industry impinges on the global economy. The foreseen limits of the current technology-technical, economic, and sustainability issues-open the door to the search for successor technologies. In this context, molecular electronics has emerged as a promising candidate that, at least in the short-term, will not likely replace our silicon-based electronics, but improve its performance through a nascent hybrid technology. Such technology will take advantage of both the small dimensions of the molecules and new functionalities resulting from the quantum effects that govern the properties at the molecular scale. An optimization of interface engineering and integration of molecules to form densely integrated individually addressable arrays of molecules are two crucial aspects in the molecular electronics field. These challenges should be met to establish the bridge between organic functional materials and hard electronics required for the incorporation of such hybrid technology in the market. In this review, the most advanced methods for fabricating large-area molecular electronic devices are presented, highlighting their advantages and limitations. Special emphasis is focused on bottom-up methodologies for the fabrication of well-ordered and tightly-packed monolayers onto the bottom electrode, followed by a description of the top-contact deposition methods so far used

3000 miles from home: a new Gastrosericus baobabicus Pulawski, 1995 (Hymenoptera, Larridae) distribution record highlights that the Sahel has a distinct entomofaunal signature

[from introduction] On October 30, 1953, an unidentified female wasp (Fig. 1) was collected from ‘Belet Uen, Somaliland’ (= Beledweyne, 4°44’N 45°12’E), situated in the valley of the Shebelle River, HiraanProvince,Somalia. It was deposited in the aculeate Hymenoptera collection of the Albany Museum, Grahamstown by D. Greathead prior to 1968. Apart from the words ‘Somaliland’ and ‘Desert Locust Survey’ the label is handwritten and the collector’snameis not recorded. Greathead’s sister, S. Gess (Albany Museum), deciphered the label and stated that he had worked for the Desert Locust Survey, investigating the natural enemies of locusts and had been in Somalia (then Somaliland) at that time (Murphy & Cock 2007). The specimen was sent in 2004 by F. Gess to W. Pulawski, who determined it as Gastrosericus baobabicus Pulawski, 1995. Gastrosericus species prey on spiders and a variety of small insects (Pulawski 1995), including Orthoptera (Krombein & Pulawski 1986), so it is likely that Greathead collected the specimen in connection with his interest in the insect enemies of Acridoidea (Orthoptera) (Greathead 1962)

Systematic status of Plectroctena mandibularis Smith and P. conjugata Santschi (Hymenoptera: Formicidae: Ponerini)

Plectroctena mandibularis Smith is the type species of Plectroctena F. Smith. Because there has been some doubt about its distinctness from P. conjugata, several techniques were used to assess the systematic status of the two species. Most crucially, several colony series contained workers of both phenotypes, and where these series included queens or males, the distinguishing feature of these specimens was not consistently related to those of the workers. Queens, males and workers did not manifest qualitative differences between the taxa, and morphological variation was continuous between the two. The putative morphological basis (funicular index) for distinguishing workers of the taxa arose from allometric variation. Putatively diagnostic colour variation in males was related to latitude, but no simple pattern of morphological variation could be correlated with geographical distribution. Plectroctena conjugata is therefore considered a junior synonym of P. mandibularis

Desarrollo de una aplicación de predicción de vida a fatiga por daño acumulativo aplicado a semirremolques de tres ejes

El transporte por carretera supone un alto porcentaje sobre el total del transporte demercancías. Esto hace necesario que los vehículos estén optimizados tanto en diseño como enpeso. El uso de aceros de alta resistencia combinados con aceros convencionales ha hechoposible reducciones de peso significativas sobre la estructura del vehículo. Estas nuevasconfiguraciones aligeradas están construidas usando espesores muy bajos, lo que sueledegenerar en la aparición de fallos prematuros por fatiga. Además, durante los procesos desoldadura, se producen cambios en las propiedades de los materiales en las zonas próximas alcordón, por lo que es necesario conocer dichos cambios para poder realizar las predicciones devida de la estructura correctamente. Para poder predecir la vida de los semirremolques, en laUniversidad de Zaragoza, se desarrolló una subrutina de predicción de vida a fatiga parasemirremolques de tres ejes basándose en la maniobra más crítica que realizan este tipo devehículos, la maniobra de giro de radio mínimo. Esta subrutina aunque es una primeraaproximación del cálculo de la vida de un semirremolque, no tiene en cuenta los efectos deldaño acumulativo que puedan deberse al resto de maniobras realizadas por un vehículo deestas características. El modelo de subrutina, que se esta investigando y se pretendedesarrollar, se basa en el daño acumulativo por fatiga según la diferenciación en el uso que seva a hacer de cada semirremolque y de las diferentes cargas a las que estarás sometidos losvehículos en cada caso

Identifying flies used for maggot debridement therapy

To the Editor: The use of maggots to clean necrotic wounds, known as maggot debridement therapy (MDT), has long been known to the scientific world. Its use has been recorded since the 1500s when soldiers’ wounds were often infested with maggots. Napoleon’s surgeon, Baron Dominic Larrey, reported that wounds that were infested with maggots appeared to heal faster than those without maggots.1 William Baer is considered to be the founder of modern MDT. While treating soldiers in World War I, he noted the good condition of wounds that had been infested with maggots, and was the first doctor on record to experiment with the use of maggots in treating infections.1 MDT even featured in the recent version of the film ‘Spartacus’. Various species of flies have been used for MDT,1 the most commonly used being Lucilia sericata, a greenbottle blowfly (Figs 1 and 2). This fly is closely related to another greenbottle, L. cuprina, but L. cuprina feeds on live as well as necrotic tissue, which is undesirable in MDT. L. cuprina is commonly named the ‘sheep blowfly’ because it is responsible for fly-strike in sheep, a form of massive, usually rectal myiasis that can kill sheep. A recent article2 suggested that L. cuprina was being used successfully for MDT at the Eugene Marais Hospital Wound Care Centre (EMHWCC). As this would be inconsistent with international experience in MDT and at odds with the usual biology of L. cuprina, it was decided to check the identity of these flies

Diseño y optimización de plumines para carretillas manipuladoras

El objeto de este artículo, es presentar una metodología de cálculo mediante el M.E.F. de plumines para manipuladoras telescópicas, analizándolos tanto en términos de rigidez como de resistencia, para cualquier tipo de plumín: telescópico, en celosía, de cajón cerrado, etc. Para ello se han simulado los diversos casos de carga y condiciones de contorno a los que puede estar sometida dicha herramienta, tanto de uso habitual como de uso extremo, teniendo en cuenta tanto la normativa existente, como la experiencia previa sobre el tema y sobre las maniobras a las que puede estar sometida la estructura. También ha sido necesario definir la metodología para la simulación de los elementos no estructurales, las zonas en contacto, los materiales, etc. En lo referente a la normativa, ha sido necesario realizar una adaptación de la normativa UNE-58536, ya que la normativa aplicable, la norma UNE 1726, resultaba poco restrictiva. Además ha sido necesario estimar algunas velocidades de translación y de rotación para poder aplicar dicha norma. Además, se han simulado y analizado las uniones por soldadura de los diversos elementos y se ha realizado un análisis comparativo de los resultados extensiométricos y los obtenidos numéricamente para unos casos de carga habituales con el objeto de validar la metodología de cálculo y los resultados obtenidos

Nanofabrication and Electrochemical Characterization of Self-Assembled Monolayers Sandwiched between Metal Nanoparticles and Electrode Surfaces

Nanoscience and nanotechnology have reached the syllabi of many upper-division undergraduate and master-level courses all over the world. There is therefore a growing need for practical exercises that illustrate the fabrication, characterization, properties, and applications of nanomaterials. Here we describe an advanced-level laboratory experiment in which students had the opportunity to fabricate surfaces modified by ordered monolayers and nanostructured materials. The surface modification was quantified by means of a quartz crystal microbalance, while the electrochemical properties of the nanoarchitectures were assessed using cyclic voltammetry experiments. Electron transfer across self-assembled monolayers mediated by gold nanoparticles was presented as a topic for discussion, and consideration of potential practical applications of the observed phenomena (catalytic and electrocatalytic processes, as well as development of optical, (opto)electronic, and photovoltaic devices with enhanced properties) was proposed as a further reading exercise

Gene expression network analysis reveals new transcriptional regulators as novel factors in human ischemic cardiomyopathy

BACKGROUND: Ischemic cardiomyopathy (ICM) is characterized by transcriptomic changes that alter cellular processes leading to decreased cardiac output. Because the molecular network of ICM is largely unknown, the aim of this study was to characterize the role of new transcriptional regulators in the molecular mechanisms underlying the responses to ischemia. METHODS: Myocardial tissue explants from ICM patients and control (CNT) subjects were analyzed by RNA-Sequencing (RNA-Seq) and quantitative Real-Time PCR. RESULTS: Enrichment analysis of the ICM transcriptomic profile allowed the characterization of novel master regulators. We found that the expression of the transcriptional regulators SP100 (-1.5-fold, p < 0.05), CITED2 (-3.8-fold, p < 0.05), CEBPD (-4.9-fold, p < 0.05) and BCL3 (-3.3-fold, p < 0.05) were lower in ICM than in CNT. To gain insights into the molecular network defined by the transcription factors, we identified CEBPD, BCL3, and HIF1A target genes in the RNA-Seq datasets. We further characterized the biological processes of the target genes by gene ontology annotation. Our results suggest that CEBPD-inducible genes with roles in the inhibition of apoptosis are downregulated and that BCL3-repressible genes are involved in the regulation of cellular metabolism in ICM. Moreover, our results suggest that CITED2 downregulation causes increased expression of HIF1A target genes. Functional analysis of HIF1A target genes revealed that hypoxic and stress response genes are activated in ICM. Finally, we found a significant correlation between the mRNA levels of BCL3 and the mRNA levels of both CEBPD (r = 0.73, p < 0.001) and CITED2 (r = 0.56, p < 0.05). Interestingly, CITED2 mRNA levels are directly related to ejection fraction (EF) (r = 0.54, p < 0.05). CONCLUSIONS: Our data indicate that changes in the expression of SP100, CITED2, CEBPD, and BCL3 affect their transcription regulatory networks, which subsequently alter a number of biological processes in ICM patients. The relationship between CITED2 mRNA levels and EF emphasizes the importance of this transcription factor in ICM. Moreover, our findings identify new mechanisms used to interpret gene expression changes in ICM and provide valuable resources for further investigation of the molecular basis of human cardiac ischemic response.National Institute of Health "Fondo de Investigaciones Sanitarias del Instituto de Salud Carlos III"European Commissio

A proposed prioritization system for the management of invasive alien plants in South Africa

Every country has weed species whose presence conflicts in some way with human management objectives and needs. Resources for research and control are limited, so priority should be given to species that are the biggest problem. The prioritization system described in this article was designed to assess objectively research and control priorities of invasive alien plants at a national scale in South Africa. The evaluation consists of seventeen criteria, grouped into five modules, that assess invasiveness, spatial characteristics, potential impact, potential for control, and conflicts of interest for each plant species under consideration. Total prioritization scores, calculated from criterion and module scores, were used to assess a species' priority. Prioritization scores were calculated by combining independent assessments provided by several experts, thus increasing the reliability of the rankings. The total confidence score, a separate index, indicates the reliability and availability of data used to make an assessment. Candidate species for evaluation were identified and assessed by several experts using the prioritization system. The final ranking was made by combining two separate indices, the total prioritization score and the total confidence score. This approach integrates the plant's perceived priority with an index of data reliability. Of the 61 species assessed, those with the highest ranks (Lantana camara, Chromolaena odorata and Opuntia ficus-indica) had high prioritization and high confidence scores, and are thus of most concern. Those species with the lowest ranks, for example, Harrisia martinii, Opuntia spinulifera and Opuntia exaltata, had low prioritization scores and high confidence scores, and thus are of least concern. Our approach to ranking weeds offers several advantages over existing systems because it is designed for multiple assessors based on the Delphi decision-making technique, the criteria contribute equally to the total score, and the system can accommodate incomplete data on a species. Although the choice of criteria may be criticized and the system has certain limitations, it appears to have delivered credible results

pH control of conductance in a pyrazolyl Langmuir–Blodgett monolayer

In this contribution pyrazole is identified as an excellent anchor group that forms high quality films under pH controlled conditions, allowing the modulation of the electrical properties with a more efficient electronic coupling in basic conditions.</p