Observations of pre-stellar cores

Our understanding of the physical and chemical structure of pre-stellar cores, the simplest star-forming sites, has significantly improved since the last IAU Symposium on Astrochemistry (South Korea, 1999). Research done over these years has revealed that major molecular species like CO and CS systematically deplete onto dust grains at the interior of pre-stellar cores, while species like N2H+ and NH3 survive in the gas phase and can usually be detected towards the core centers. Such a selective behaviour of molecular species gives rise to a differentiated (onion-like) chemical composition, and manifests itself in molecular maps as a dichotomy between centrally peaked and ring-shaped distributions. From the point of view of star-formation studies, the identification of molecular inhomogeneities in cores helps to resolve past discrepancies between observations made using different tracers, and brings the possibility of self-consistent modelling of the core internal structure. Here I present recent work on determining the physical and chemical structure of two pre-stellar cores, L1498 and L1517B, using observations in a large number of molecules and Monte Carlo radiative transfer analysis. These two cores are typical examples of the pre-stellar core population, and their chemical composition is characterized by the presence of large freeze out holes in most molecular species. In contrast with these chemically processed objects, a new population of chemically young cores has started to emerge. The characteristics of its most extreme representative, L1521E, are briefly reviewed.Comment: 10 pages, 5 figures. To appear in IAU 231 conf. proc. "Astrochemistry: Recent Successes and Current Challenges," eds. D.C. Lis, G.A. Blake, and E. Herbs

Boundary states, matrix factorisations and correlation functions for the E-models

The open string spectra of the B-type D-branes of the N=2 E-models are calculated. Using these results we match the boundary states to the matrix factorisations of the corresponding Landau-Ginzburg models. The identification allows us to calculate specific terms in the effective brane superpotential of E_6 using conformal field theory methods, thereby enabling us to test results recently obtained in this context.Comment: 20 pages, no figure

Effective superpotentials for B-branes in Landau-Ginzburg models

We compute the partition function for the topological Landau-Ginzburg B-model on the disk. This is done by treating the worldsheet superpotential perturbatively. We argue that this partition function as a function of bulk and boundary perturbations may be identified with the effective D-brane superpotential in the target spacetime. We point out the relationship of this approach to matrix factorizations. Using these methods, we prove a conjecture for the effective superpotential of Herbst, Lazaroiu and Lerche for the A-type minimal models. We also consider the Landau-Ginzburg theory of the cubic torus where we show that the effective superpotential, given by the partition function, is consistent with the one obtained by summing up disk instantons in the mirror A-model. This is done by explicitly constructing the open-string mirror map.Comment: 57p, 7 figs, harvma

Matrix Factorizations, Minimal Models and Massey Products

We present a method to compute the full non-linear deformations of matrix factorizations for ADE minimal models. This method is based on the calculation of higher products in the cohomology, called Massey products. The algorithm yields a polynomial ring whose vanishing relations encode the obstructions of the deformations of the D-branes characterized by these matrix factorizations. This coincides with the critical locus of the effective superpotential which can be computed by integrating these relations. Our results for the effective superpotential are in agreement with those obtained from solving the A-infinity relations. We point out a relation to the superpotentials of Kazama-Suzuki models. We will illustrate our findings by various examples, putting emphasis on the E_6 minimal model.Comment: 32 pages, v2: typos corrected, v3: additional comments concerning the bulk-boundary crossing constraint, some small clarifications, typo

Simulation System for the Wendelstein 7-X Safety Control System

The Wendelstein 7-X (W7-X) Safety Instrumented System (SIS) ensures personal safety and investment protection. The development and implementation of the SIS are based on the international safety standard for the process industry sector, IEC 61511. The SIS exhibits a distributed and hierarchical organized architecture consisting of a central Safety System (cSS) on the top and many local Safety Systems (lSS) at the bottom. Each technical component or diagnostic system potentially hazardous for the staff or for the device is equipped with an lSS. The cSS is part of the central control system of W7-X. Whereas the lSSs are responsible for the safety of each individual component, the cSS ensures safety of the whole W7-X device. For every operation phase of the W7-X experiment hard- and software updates for the SIS are mandatory. New components with additional lSS functionality and additional safety signals have to be integrated. Already established safety functions must be adapted and new safety functions have to be integrated into the cSS. Finally, the safety programs of the central and local safety systems have to be verified for every development stage and validated against the safety requirement specification. This contribution focuses on the application of a model based simulation system for the whole SIS of W7-X. A brief introduction into the development process of the SIS and its technical realization will be give followed by a description of the design and implementation of the SIS simulation system using the framework SIMIT (Siemens). Finally, first application experiences of this simulation system for the preparation of the SIS for the upcoming operation phase OP 1.2b of W7-X will be discussed

Reaction kinetics of bismuth dissolution from lead cake by sulfuric acid leaching

Journal ArticleLead cake, a zinc smelter flue dust residue, consists primarily of lead sulfate. Characteristic properties of lead cake were determined in order to aid the understanding of reaction mechanisms involved in bismuth removal from lead cake by sulfuric acid digestion. Sp gr (specific gravity) measurements, surface area measurements, and photomicrographs revealed that the particles of lead cake are quite porous and seem to consist of an agglomeration of submicron grains (0.4 \xm) fused together in a manner similar to cement clinker. Analysis of experimental rate data, which was independent of particle size, indicates that the dissolution reaction involves two distinct, rate limiting steps. The initial stage of reaction appears to be limited mainly by intergranular diffusion of the reactant, hydrogen ion, while the latter stage of reaction appears to be controlled by diffusion of soluble reaction products through the reaction product layer of the individual grains

Experimental Test bed to De-Risk the Navy Advanced Development Model

This paper presents a reduced scale demonstration test-bed at the University of Texas’ Center for Electromechanics (UT-CEM) which is well equipped to support the development and assessment of the anticipated Navy Advanced Development Model (ADM). The subscale ADM test bed builds on collaborative power management experiments conducted as part of the Swampworks Program under the US/UK Project Arrangement as well as non-military applications. The system includes the required variety of sources, loads, and controllers as well as an Opal-RT digital simulator. The test bed architecture is described and the range of investigations that can be carried out on it is highlighted; results of preliminary system simulations and some initial tests are also provided. Subscale ADM experiments conducted on the UT-CEM microgrid can be an important step in the realization of a full-voltage, full-power ADM three-zone demonstrator, providing a test-bed for components, subsystems, controls, and the overall performance of the Medium Voltage Direct Current (MVDC) ship architecture.Center for Electromechanic

Bismuth dissolution from smelter flue dust residues

Journal ArticleEffective bismuth removal from flue dust residues has been accomplished for flue dusts from both zinc and copper smelters. Selective dissolution of bismuth, with respect to silver and lead, can be achieved by the proper manipulation of temperature, sulfuric acid addition and sodium chloride addition. Optimum levels of these variables were determined using a response surface technique to maximize the objective function: Y = %Bi/(l + %Ag). In the case of the flue dust residue from a zinc smelter, which contains bismuth as an impurity (0.05%), 86% bismuth removal can be realized with less than 1% combined silver and lead dissolution. Similarly, in the case of flue dust from a copper smelter, which contains bismuth as a primary constituent (3.3%), 93% bismuth removal was obtained with little dissolution of silver and lead values

Dynamic Load and Storage Integration

Modern technology combined with the desire to minimize the size and weight of a ship’s power system are leading to renewed interest in more electric or all electric ships. An important characteristic of the emerging ship power system is an increasing level of load variability, with some future pulsed loads requiring peak power in excess of the available steady– state power. This inevitably leads to the need for some additional energy storage beyond that inherent in the fuel. With the current and evolving technology, it appears that storage will be in the form of batteries, rotating machines, and capacitors. All of these are in use on ships today and all have enjoyed significant technological improvements over the last decade. Moreover all are expected to be further enhanced by today’s materials research. A key benefit of storage is that, when it can be justified for a given load, it can have additional beneficial uses such as ride-through capability to restart a gas turbine if there is an unanticipated power loss; alternatively, storage can be used to stabilize the power grid when switching large loads. Knowing when to stage gas turbine utilization versus energy storage is a key subject in this paper. The clear need for storage has raised the opportunity to design a comprehensive storage system, sometimes called an energy magazine, that can combine intermittent generation as well as any or all of the other storage technologies to provide a smaller, lighter and better performing system than would individual storage solutions for each potential application.Center for Electromechanic

D-brane Categories for Orientifolds -- The Landau-Ginzburg Case

We construct and classify categories of D-branes in orientifolds based on Landau-Ginzburg models and their orbifolds. Consistency of the worldsheet parity action on the matrix factorizations plays the key role. This provides all the requisite data for an orientifold construction after embedding in string theory. One of our main results is a computation of topological field theory correlators on unoriented worldsheets, generalizing the formulas of Vafa and Kapustin-Li for oriented worldsheets, as well as the extension of these results to orbifolds. We also find a doubling of Knoerrer periodicity in the orientifold context.Comment: 45 pages, 6 figure