Quantum Stress: Density Functional Theory Formulation and Physical Manifestation

The concept of "quantum stress (QS)" is introduced and formulated within density functional theory (DFT), to elucidate extrinsic electronic effects on the stress state of solids and thin films in the absence of lattice strain. A formal expression of QS (\sigma^Q) is derived in relation to deformation potential of electronic states ({\Xi}) and variation of electron density ({\Delta}n), \sigma^Q = {\Xi}{\Delta}n, as a quantum analog of classical Hook's law. Two distinct QS manifestations are demonstrated quantitatively by DFT calculations: (1) in the form of bulk stress induced by charge carriers; and (2) in the form of surface stress induced by quantum confinement. Implications of QS in some physical phenomena are discussed to underlie its importance.Comment: 5 pages, 4 figure

Similarities and differences with the ‘general public’: Chinese civil servants’ attitude to genetically modified organisms and its influencing factors

ABSTRACTThis study examines Chinese civil servants’ attitudes toward genetically modified organisms by reviewing a national survey of 3,018 Chinese civil servants. The findings show that Chinese civil servants hold a more positive attitude to GMOs than the wider Chinese “general public”, with a similar level of genetic scientific literacy and belief in GMOs conspiracy theories and their influence mechanisms. While the Chinese civil servants’ occupational literacy plays an important role in their GMOs attitude. This study provides a new mind-set for studying some specific groups’ attitudes toward GMOs and related food policies

Interaction of Cloud Dynamics and Microphysics During the Rapid Intensification of Super‐Typhoon Nanmadol (2022) Based on Multi‐Satellite Observations

Abstract Using multi‐satellite observations, the cloud dynamic and microphysical characteristics were revealed during the rapid intensification (RI) of super‐typhoon Nanmadol (2022). As the storm intensifies, the eyewall contracts, the upper‐level divergence strengthens, and the cirrus cloud increases, leading to stronger upper‐level radial outflow and the vertical updraft. Meanwhile, it is found that there exists a dynamically attractive area in the outer rainbands, where particles grow effectively and form “a small amount of large particles” around 300 km from the eye. A theory of cloud dynamics‐microphysics interaction, called “tunnel theory,” is further proposed to explain the generation, accumulation, and concentrated downflow of large particles in the outer rainbands during RI. Results suggest the unique feature of particle distribution in the outer rainbands could be a potential indicator for RI

A Comparison of Spectral Bin Microphysics versus Bulk Parameterization in Forecasting Typhoon In-Fa (2021) before, during, and after Its Landfall

Typhoon In-Fa hit continental China in July 2021 and caused an unprecedented rainfall amount, making it a typical case to examine the ability of numerical models in forecasting landfalling typhoons. The record-breaking storm was simulated using a 3-km-resolution weather research and forecast (WRF) model with spectral bin microphysics scheme (BIN) and two-moment seven-class bulk parameterization scheme (BULK). The simulations were then separated into three different typhoon landfall periods (i.e., pre-landfall, landfall, and post-landfall). It was found that typhoon intensity prediction is sensitive to microphysical schemes regardless of landfall periods, while typhoon track prediction tends to be more (less) sensitive to microphysical schemes after (before) typhoon landfall. Moreover, significant differences exist between BIN and BULK schemes in simulating the storm intensity, track, and rainfall distribution. BIN scheme simulates stronger (weaker) typhoon intensity than BULK scheme after (before) landfall, while BULK scheme simulates typhoon moving faster (slower) than BIN scheme before (after) landfall. BIN scheme produces much more extensive and homogeneous typhoon rainbands than BULK scheme, whereas BULK scheme produces stronger (weaker) rainfall in the typhoon inner (outer) rainbands. The possible reasons for such differences are discussed. At present, the ability of WRF and other mesoscale models to accurately simulate the typhoon precipitation hydrometeors is still limited. To evaluate the performances of BIN and BULK schemes of WRF model in simulating the condensed water in Typhoon In-Fa, the observed microwave brightness temperature and radar reflectivity from the core observatory of Global Precipitation Mission (GPM) satellite are directly used for validation with the help of a satellite simulator. It is suggested that BIN scheme has better performance in estimating the spatial structure, overall amplitude, and precise location of the condensed water in typhoons before landfall. During typhoon landfall, the performance of BIN scheme in simulating the structure and location of the condensate is close to that of BULK scheme, but the condensate intensity prediction by BIN scheme is still better; BULK scheme performs even better than BIN scheme in the prediction of condensate structure and location after typhoon landfall. Both schemes seem to have poorer performances in simulating the spatial structure of precipitation hydrometeors during typhoon landfall than before/after typhoon landfall. Moreover, BIN scheme simulates more (less) realistic warm (cold) rain processes than BULK scheme, especially after typhoon landfall. BULK scheme simulates more cloud water and larger convective updraft than BIN scheme, and this is also reported in many model studies comparing BIN and BULK schemes

A Comparison of Spectral Bin Microphysics versus Bulk Parameterization in Forecasting Typhoon In-Fa (2021) before, during, and after Its Landfall

Typhoon In-Fa hit continental China in July 2021 and caused an unprecedented rainfall amount, making it a typical case to examine the ability of numerical models in forecasting landfalling typhoons. The record-breaking storm was simulated using a 3-km-resolution weather research and forecast (WRF) model with spectral bin microphysics scheme (BIN) and two-moment seven-class bulk parameterization scheme (BULK). The simulations were then separated into three different typhoon landfall periods (i.e., pre-landfall, landfall, and post-landfall). It was found that typhoon intensity prediction is sensitive to microphysical schemes regardless of landfall periods, while typhoon track prediction tends to be more (less) sensitive to microphysical schemes after (before) typhoon landfall. Moreover, significant differences exist between BIN and BULK schemes in simulating the storm intensity, track, and rainfall distribution. BIN scheme simulates stronger (weaker) typhoon intensity than BULK scheme after (before) landfall, while BULK scheme simulates typhoon moving faster (slower) than BIN scheme before (after) landfall. BIN scheme produces much more extensive and homogeneous typhoon rainbands than BULK scheme, whereas BULK scheme produces stronger (weaker) rainfall in the typhoon inner (outer) rainbands. The possible reasons for such differences are discussed. At present, the ability of WRF and other mesoscale models to accurately simulate the typhoon precipitation hydrometeors is still limited. To evaluate the performances of BIN and BULK schemes of WRF model in simulating the condensed water in Typhoon In-Fa, the observed microwave brightness temperature and radar reflectivity from the core observatory of Global Precipitation Mission (GPM) satellite are directly used for validation with the help of a satellite simulator. It is suggested that BIN scheme has better performance in estimating the spatial structure, overall amplitude, and precise location of the condensed water in typhoons before landfall. During typhoon landfall, the performance of BIN scheme in simulating the structure and location of the condensate is close to that of BULK scheme, but the condensate intensity prediction by BIN scheme is still better; BULK scheme performs even better than BIN scheme in the prediction of condensate structure and location after typhoon landfall. Both schemes seem to have poorer performances in simulating the spatial structure of precipitation hydrometeors during typhoon landfall than before/after typhoon landfall. Moreover, BIN scheme simulates more (less) realistic warm (cold) rain processes than BULK scheme, especially after typhoon landfall. BULK scheme simulates more cloud water and larger convective updraft than BIN scheme, and this is also reported in many model studies comparing BIN and BULK schemes

Personal Narrative under Nationalism: Chinese COVID-19 Vaccination Expressions on Douyin

Scholars are divided over whether narrative/storytelling occupies a central position in health-related behaviour or in the health-related issues discussed on social media platforms. This study explored Chinese COVID-19 vaccination expressions on Douyin, China’s biggest short-video sharing social media platform, and found that narration is still the most important tool employed by Chinese users when talking about COVID-19 vaccinations on Douyin, emphasizing nationalism and widespread optimism. Most of the narratives employed by Chinese users come from a first-person perspective. Nationalism, as manifested in the support expressed for national policies, rather than the external platform characteristics of memetics, makes the Chinese users’ expressions about COVID-19 vaccinations similar on Douyin. Douyin seems to have become a ‘pilgrimage platform’ for the Chinese public to express their patriotic sentiment and their trust in the country and the government

A Comparison of Convective and Stratiform Precipitation Microphysics of the Record-breaking Typhoon In-Fa (2021)

In July 2021, Typhoon In-Fa attacked eastern China and broke many records for extreme precipitation over the last century. Such an unrivaled impact results from In-Fa’s slow moving speed and long residence time due to atmospheric circulations. With the supports of 66 networked surface disdrometers over eastern China and collaborative observations from the advanced GPM satellite, we are able to reveal the unique precipitation microphysical properties of the record-breaking Typhoon In-Fa (2021). After separating the typhoon precipitation into convective and stratiform types and comparing the drop size distribution (DSD) properties of Typhoon In-Fa with other typhoons from different climate regimes, it is found that typhoon precipitation shows significant internal differences as well as regional differences in terms of DSD-related parameters, such as mass-weighted mean diameter (Dm), normalized intercept parameter (Nw), radar reflectivity (Z), rain rate (R), and intercept, shape, and slope parameters (N0, µ, Λ). Comparing different rain types inside Typhoon In-Fa, convective rain (Nw ranging from 3.80 to 3.96 mm−1 m−3) shows higher raindrop concentration than stratiform rain (Nw ranging from 3.40 to 3.50 mm−1 m−3) due to more graupels melting into liquid water while falling. Large raindrops occupy most of the region below the melting layer in convective rain due to a dominant coalescence process of small raindrops (featured by larger ZKu, Dm, and smaller N0, µ, Λ), while small raindrops account for a considerable proportion in stratiform rain, reflecting a significant collisional breakup process of large raindrops (featured by smaller ZKu, Dm, and larger N0, µ, Λ). Compared with other typhoons in Hainan and Taiwan, the convective precipitation of Typhoon In-Fa shows a larger (smaller) raindrop concentration than that of Taiwan (Hainan), while smaller raindrop diameter than both Hainan and Taiwan. Moreover, the typhoon convective precipitation measured in In-Fa is more maritime-like than precipitation in Taiwan. Based on a great number of surface disdrometer observational data, the GPM precipitation products were further validated for both rain types, and a series of native quantitative precipitation estimation relations, such as Z–R and R–Dm relations were derived to improve the typhoon rainfall retrieval for both ground-based radar and spaceborne radar