Properties of Raphia Palm Interspersed Fibre Filled High Density Polyethylene

Blends of nonbiodegradable and biodegradable polymers can promote a reduction in the volume of plastic waste when they undergo partial degradation. In this study, properties of raphia palm interspersed fibre (RPIF) filled high density polyethylene (HDPE) have been investigated at different levels of filler loadings, 0 to 60 wt.%. Maleic anhydride-graft polyethylene was used as a compatibilizer. Raphia palm interspersed fibre was prepared by grinding and sieved to a particle size of 150 µm. HDPE blends were prepared in a corotating twin screw extruder. Results showed that the tensile strength and elongation at break of the blends decreased with increase in RPI loadings and addition of MA-g-PE was found to improve these properties. However, the Young’s modulus increased with increase in the amount of RPI into HDPE and compatibilization further increased the Young’s modulus. The water absorption indices and weight loss for RPI/HDPE composites were found to increase with RPI loadings but were decreased on addition of MA-g-PE

Diffusion Characteristics of Toluene into Natural Rubber/Linear Low Density Polyethylene Blends

The sorption and diffusion of toluene through blends of natural rubber (NR) and linear low density polyethylene (LLDPE) of varying compositions were studied at 35, 55, and 65°C by conventional weight-gain experiments. The effects of blend ratio on the diffusion, sorption, and permeation coefficients were determined. The sorption data were used to estimate the activation energies of diffusion and permeation, parameters which were found to show a decrease when the amount of NR or LLDPE was increased. The transport of toluene through most of the blends was anomalous, althouh at 35°C, the transport of toluene through the 60/40 blend was Fickian and at 35°C, pseudo-Fickian. The enthalpy of sorption of toluene obtained is positive and suggests a Henry's type sorption

Costing and cost-effectiveness of Cepheid Xpert HIV -1 Qual Assay using whole blood protocol versus PCR by Abbott Systems in Malawi

Background Timely diagnosis of HIV in infants and children is an urgent priority. In Malawi, 40,000 infants annually are HIV exposed. However, gold standard polymerase-chain-reaction (PCR) based testing requires centralised laboratories, causing turn-around times (TAT) of 2 to 3 months and significant loss to follow-up. If feasible and acceptable, minimising diagnostic delays through HIV Point-of-care-testing (POCT) may be cost-effective. We assessed whether POCT Cepheid Xpert HIV-1 Qual assay whole blood (XpertHIV) was more cost-effective than PCR. Methods From July-August 2018, 700 PCR Abbott tests using dried blood spots (DBS) were performed on 680 participants who enrolled on the feasibility, acceptability and performance of the XpertHIV study. Newly identified HIV-positive DBS from the 680 participants were retested, so with confirmatory testing of the HIV-positive cases, 700 tests were performed. We conducted a cost-minimisation and cost-effectiveness analysis of XpertHIV against PCR, as the standard of care. A random sample of 200 caregivers from the 680 participants had semi-structured interviews to explore costs from a societal perspective of XpertHIV at Mulanje District Hospital, Malawi. Analysis used TAT as the primary outcome measure. Results were extrapolated from the study period (29 days) to a year (240 working days). Sensitivity analyses characterised individual and joint parameter uncertainty and estimated patient cost per test. Results During the study period, XpertHIV was cost-minimising at $42.34 per test compared to$66.66 for PCR. Over a year, XpertHIV remained cost-minimising at $16.12 compared to PCR at$27.06. From the patient perspective (travel, food, lost productivity), the cost per test of XpertHIV was $2.45. XpertHIV had a mean TAT of 7.10 hours compared to 153.15 hours for PCR. Extrapolates accounting for equipment costs, lab consumables and losses to follow up estimated annual savings of$2,193,538.88 if XpertHIV is used nationally, as opposed to PCR. Conclusions This preliminary evidence suggests that adopting POCT XpertHIV will save time, allowing HIV-exposed infants to receive prompt care and may improve outcomes. The Malawi government will pay less due to XpertHIV’s cost savings and associated benefits

Effect of Soil Burial on Tensile Properties of Polypropylene/Plasticized Cassava Starch Blends

Polypropylene (PP)/plasticized cassava starch (PCS) blended with and without compatibilizer (polypropylene-graft-maleic anhydride (PP-g-MA)) via melt blending were prepared for soil burial which lasted for 90 days. Plasticized starch loadings of 0, 10, 20, 30, 40, and 50 wt.% were used, while pp-g-ma was used at 10 wt.% based on starch weight. The PP/PCS and PP/PCS/PP-G-MA blends were evaluated for their tensile properties. It was observed that the tensile strength, elongation at break, and young’s modulus decreased with increases in soil burial time as well as starch content for PP/PCS blends. Similar treads for the tensile properties were observed for PP/PCS/PP-g-MA, but with higher properties as compared to uncompatibilized blends. However, the tensile properties for both PP/PCS and PP/PCS/PP-g-Ma decrease with increases in starch loading and also as the burial period progressed