Bacterial Active Community Cycling in Response to Solar Radiation and Their Influence on Nutrient Changes in a High-Altitude Wetland

Indexación: Web of Science; Scopus.Microbial communities inhabiting high-altitude spring ecosystems are subjected to extreme changes in solar irradiance and temperature throughout the diel cycle. Here, using 16S rRNA gene tag pyrosequencing (cDNA) we determined the composition of actively transcribing bacteria from spring waters experimentally exposed through the day (morning, noon, and afternoon) to variable levels of solar radiation and light quality, and evaluated their influence on nutrient recycling. Solar irradiance, temperature, and changes in nutrient dynamics were associated with changes in the active bacterial community structure, predominantly by Cyanobacteria, Verrucomicrobia, Proteobacteria, and 35 other Phyla, including the recently described Candidate Phyla Radiation (e.g., Parcubacteria, Gracilibacteria, OP3, TM6, SR1). Diversity increased at noon, when the highest irradiances were measured (3.3-3.9 H', 1125 W m(-2)) compared to morning and afternoon (0.6-2.8 H'). This shift was associated with a decrease in the contribution to pyrolibraries by Cyanobacteria and an increase of Proteobacteria and other initially low frequently and rare bacteria phyla (< 0.5%) in the pyrolibraries. A potential increase in the activity of Cyanobacteria and other phototrophic groups, e.g., Rhodobacterales, was observed and associated with UVR, suggesting the presence of photo activated repair mechanisms to resist high levels of solar radiation. In addition, the percentage contribution of cyanobacterial sequences in the afternoon was similar to those recorded in the morning. The shifts in the contribution by Cyanobacteria also influenced the rate of change in nitrate, nitrite, and phosphate, highlighted by a high level of nitrate accumulation during hours of high radiation and temperature associated with nitrifying bacteria activity. We did not detect ammonia or nitrite oxidizing bacteria in situ, but both functional groups (Nitrosomona and Nitrospira) appeared mainly in pyrolibraries generated from dark incubations. In total, our results reveal that both the structure and the diversity of the active bacteria community was extremely dynamic through the day, and showed marked shifts in composition that influenced nutrient recycling, highlighting how abiotic variation affects potential ecosystem functioning.http://journal.frontiersin.org/article/10.3389/fmicb.2016.01823/ful

Microbial Activity Response to Solar Radiation across Contrasting Environmental Conditions in Salar de Huasco, Northern Chilean Altiplano

Indexación: Web of Science; Scopus.In high altitude environments, extreme levels of solar radiation and important differences of ionic concentrations over narrow spatial scales may modulate microbial activity. In Salar de Huasco, a high-altitude wetland in the Andean mountains, the high diversity of microbial communities has been characterized and associated with strong environmental variability. Communities that differed in light history and environmental conditions, such as nutrient concentrations and salinity from different spatial locations, were assessed for bacterial secondary production (BSP, H-3-leucine incorporation) response from short-term exposures to solar radiation. We sampled during austral spring seven stations categorized as: (a) source stations, with recently emerged groundwater (no-previous solar exposure); (b) stream running water stations; (c) stations connected to source waters but far downstream from source points; and (d) isolated ponds disconnected from ground sources or streams with a longer isolation and solar exposure history. Very high values of 0.25 mu E m(-2) s(-1), 72 W m(-2) and 12 W m(-2) were measured for PAR, UVA, and UVB incident solar radiation, respectively. The environmental factors measured formed two groups of stations reflected by principal component analyses (near to groundwater sources and isolated systems) where isolated ponds had the highest BSP and microbial abundance (35 microalgae taxa, picoeukaryotes, nanoflagellates, and bacteria) plus higher salinities and PO43- concentrations. BSP short-term response (4 h) to solar radiation was measured by H-3-leucine incorporation under four different solar conditions: full sun, no UVB, PAR, and dark. Microbial communities established in waters with the longest surface exposure (e.g., isolated ponds) had the lowest BSP response to solar radiation treatments, and thus were likely best adapted to solar radiation exposure contrary to ground source waters. These results support our light history (solar exposure) hypothesis where the more isolated the community is from ground water sources, the better adapted it is to solar radiation. We suggest that factors other than solar radiation (e.g., salinity, PO43-, NO3-) are also important in determining microbial productivity in heterogeneous environments such as the Salar de Huasco.http://journal.frontiersin.org/article/10.3389/fmicb.2016.01857/ful

Metamorphic conditions in the Nilgiri Granulite Terrane and the adjacent Moyar and Bhavani Shear Zones: A reevaluation

Data were presented on pressure and temperature determinations from the Nilgiri Hills. About 70 samples were analyzed by probe and several calibrations of garnet-pyroxene thermometry and barometry applied. Most calibrations gave considerable scatter; however, a new calibration by Bhattacharya, Raith, Lal, and others, accounting for nonideality in both garnet and orthopyroxene, gave consistent results of 754 + or - 52 C and 9.2 + or - 0.7 kbar. On the regional scale, a pressure increase of 6.5 to 7 kbar in the SW to 11 kbar in the NE was related to block tilting. A continuous pressure gradient into the Moyar shear zone suggests that the zone is not a suture juxtaposing unrelated blocks

H2_2 [Pt(C2_2O4_4)2_2] as a Tailor‐made Halide‐free Precursor for the Preparation of Diesel Oxidation Catalysts: Nanoparticles Formation, Thermal Stability and Catalytic Performance

The aim of this study was to investigate a tailor-made metal precursor and its chemical properties to tune the properties of supported metal nanoparticles (NPs) and their catalytic performance when used as Diesel Oxidation Catalyst (DOC). The formation of extremely small Pt NPs from a new halide-free Pt complex was investigated, namely bis(oxalato)platinate, H$_2$ [Pt(C$_2$O$_4$)$_2$]. The size evolution of the supported NPs, from the formation upon the Pt precursor decomposition on γ-alumina to the sintering of the NPs at high temperatures, was followed by thermogravimetric analysis coupled with mass spectrometry (TG-MS) and differential scanning calorimetry (DSC), transmission electron microscopy (TEM) and diffuse reflectance infrared Fourier transform (DRIFT) spectroscopy. A correlation between the NPs’ size of the catalyst and the performance for the CO, C$_3$H$_6$, C$_3$H$_8$ and NO oxidation reactions pointed out a retained activity during test cycles, showing low sensitivity to the test conditions applied (i. e., temperature and gas composition). The overall catalytic performance was better in the fresh catalysts compared to the reference catalyst prepared from platinum nitrate, Pt(NO$_3$)$_4$. In particular, the different dispersion of the Pt NPs over the support obtained from the two precursors was identified as the reason for the different catalytic performance, retaining small NPs size after the tests cycles

The thermal expansion of a Kevlar® 49 cord down to cryogenic temperatures

In this work the thermal expansion of a twisted Kevlar® 49 cord assembly made at SRON in the 293 K to 7 K temperature range is presented. In addition to these results, the setup used to measure this thermal expansion is described, as are the methods used to calibrate and verify the accuracy of this setup. Measurements with the set-up agree to within 5 % with Ti-6Al-4V literature values. The thermal expansion of the SRON Kevlar® 49 cord assembly is measured and compared to the sparse literature available. At 7 K, the total fractional expansion of the Kevlar® cord assembly is 1.6·10-3 relative to 293 K, with an estimated relative error of 3%.</p

Therapie der blanden Struma: Erfahrungen mit einer Kombination von 100 µg L-Thyroxin und 10 µg L-Trijodthyronin

Dtsch med Wochenschr 1981; 106: 579-583 DOI: 10.1055/s-2008-1070359 © Georg Thieme Verlag KG Stuttgart · New York Therapie der blanden Struma: Erfahrungen mit einer Kombination von 100 µg L-Thyroxin und 10 µg L-Trijodthyronin Treatment of non-toxic goitre: results of combined treatment with 100 µg L-thyroxine and 10 µg L-triiodothyronine C. R. Pickardt, R. Gärtner, J. Habermann, K. Horn, P. C. Scriba, F. A. Horster, H. Wagner, K. Hengst Medizinische Klinik Innenstadt der Universität München, Klinik für Innere Medizin, Medizinische Hochschule Lübeck, Medizinische Klinik C und Poliklinik der Universität Düsseldorf sowie Medizinische Klinik und Poliklinik der Universität Münster Zusammenfassung Bei 96 Patienten mit blander Struma wurde eine offene Prüfung mit einem neuen Schilddrüsenhormonpräparat durchgeführt, das 100 µg L-Thyroxin (T4) und 10 µg L-Trijodthyronin (T3) pro Tablette enthält. Als Parameter für die therapeutisch wirksame Tagesdosis wurde die Suppression des TRH-stimulierten Thyreotropinspiegels im Serum gewählt. Hierbei war eine Tagesdosis von 50 µg T4 und 5 µg T3 bei 16 Patienten unwirksam; 75 µg T4 und 7,5 µg T3waren bei nur 4 von 12 Patienten suppressiv wirksam, während 100 µg T4 und 10 µg T3 bei allen Düsseldorfer und Münsteraner Patienten, aber nur bei 17 von 31 Patienten in München den TRH-stimulierten TSH-Anstieg supprimierte. Während der gesamten Therapiedauer blieben Thyroxin- und Trijodthyroninspiegel im Serum im Normbereich; bei einigen Patienten erhöhte sich der Quotient aus Thyroxin und thyroxinbindendem Globulin über die Norm. Zeichen einer Überdosierung oder Unverträglichkeit wurden nicht beobachtet. In pharmakokinetischen Untersuchungen an acht freiwilligen schilddrüsengesunden Probanden erreichte der mittlere Thyroxin- und Trijodthyroninspiegel etwa 2 Stunden nach Applikation sein Maximum und näherte sich nach sechs Stunden wieder der Norm. Es zeigten sich deutliche individuelle Schwankungen in den ersten Stunden nach Applikation. Wir empfehlen deshalb, Schilddrüsenhormonspiegel erst 12 oder 24 Stunden nach Applikation eines Schilddrüsenhormonpräparates zu bestimmen; zu dieser Zeit sollte auch der TRH-Test durchgeführt werden. Die Untersuchungen bestätigen die Notwendigkeit, bei der Strumatherapie mit einem Schilddrüsenhormonpräparat die suppressiv wirksame Dosis individuell zu ermitteln; diese Dosis beträgt vorzugsweise 100 µg Thyroxin und 10 µg Trijodthyronin oder 150 µg Thyroxin oder 100 µg Thyroxin und 20 µg Trijodthyronin pro Tag.A new thyroid hormone preparation (100 µg L-thyroxine [T4] and 10 µg L-triiodothyronine [T3] per tablet) was given to 96 patients with non-toxic goitre. Suppression of the TRH-stimulated thyrotropin level in serum was chosen as a measure of therapeutic effectiveness. Daily dose of 50 µg T4 and 5 µg T3 was ineffective in 16 patients; 75 µg T4 and 7.5 µg T3 was effective in only four of twelve patients, while 100 µg T4and 10 µg T3 was effective in all patients from clinics in Düsseldorf and Münster, but in only 17 of 31 patients from Munich, in suppressing the TRH-stimulated TSH rise. During the entire period of treatment serum thyroxine and triiodothyronine levels remained normal. In some patients the ratio of thyroxine to thyroxine-binding globulin was above normal. Signs of overdosage or intolerance were not observed. Pharmacokinetic studies on eight volunteers with normal thyroid function demonstrated that the mean thyroxine and triiodothyronine levels reached maximum about two hours after administration, returning towards normal after six hours. There were marked individual variations in the first hours after administration. It is therefore recommended that the thyroid hormone level be determined no earlier than 12 or 24 hours after the thyroid hormone preparation has been administered; TRH test should also be performed at this time. These results indicate the need for determining individually the effective suppressive dose of a thyroid hormone preparation in the treatment of goitre. Preferably the dose should be 100 µg thyroxine and 10 µg triiodothyronine, or 150 µg thyroxine or 100 µg thyroxine and 20 µg triiodothyronine per day

Together We Can Make It Work! Toward a Design Framework for Inclusive and Participatory City-Making of Playable Cities

Making it work together can be challenging when various stakeholders are involved. Given the context of neighborhoods and cities specifically, stakeholders values and interests are not always aligned. In these settings, to construct long-term and sustaining participatory city-making projects, to make it work together, is demanding. To address this challenge, this paper proposes a design framework for inclusive and participatory city-making. This framework is inspired by the playable city perspective in that it endorses an open, exploratory, and interactive mindset of city actors. An extensive literature review on approaches taken for playful and participatory interventions in local communities provides the foundations for the framework. The review brings forward four pillars on which the framework is grounded and four activities for exploration of the design space for participatory city-making. A case study from The Hague (NL) is used to demonstrate how the framework can be applied to design and analyze processes in which city stakeholders together make it work. The case study analysis complements the framework with various research methods to support researchers, urban planners, and designers to engage with all city stakeholders to create playful and participatory interventions, which are inclusive and meaningful for the local community. The research contributions of this paper are the proposed framework and informed suggestions on how this framework in practice assists city stakeholders to together make it work

Erratum: Multi-wavelength, spatially resolved modelling of HD 48682’s debris disc

This is an erratum to the paper ‘Multi-wavelength, spatially resolved modelling of HD 48682’s debris disc’ that was published in MNRAS, 497, 1098–1109 (2020). In the original version of the paper, the discussion in Section 3.4 on the observation and data reduction for the Sub-Millimeter Array (SMA) data corresponding to HD 48682 was incompletely described. Here, we present a more complete discussion of the SMA observations, their reduction and calibration, and a table summarising the archival SMA data used in this work

The PLATO Dome A Site-Testing Observatory : instrumentation and first results

The PLATeau Observatory (PLATO) is an automated self-powered astrophysical observatory that was deployed to Dome A, the highest point on the Antarctic plateau, in 2008 January. PLATO consists of a suite of site-testing instruments designed to quantify the benefits of the Dome A site for astronomy, and science instruments designed to take advantage of the unique observing conditions. Instruments include CSTAR, an array of optical telescopes for transient astronomy; Gattini, an instrument to measure the optical sky brightness and cloud cover statistics; DASLE, an experiment to measure the statistics of the meteorological conditions within the near-surface layer; Pre-HEAT, a submillimeter tipping radiometer measuring the atmospheric transmission and water vapor content and performing spectral line imaging of the Galactic plane; and Snodar, an acoustic radar designed to measure turbulence within the near-surface layer. PLATO has run completely unattended and collected data throughout the winter 2008 season. Here we present a detailed description of the PLATO instrument suite and preliminary results obtained from the first season of operation

Bacterial Active Community Cycling in Response to Solar Radiation and Their Influence on Nutrient Changes in a High-Altitude Wetland

This research was supported by funds granted by Comisión Nacional de Investigación Científica y Tecnológica (CONICYT, Chile) FONDECYT grants N° 1110824, 1140179, 11110190, 1100358, 1110953, and 1140356; CONICYT-PIA FB0001