Usability Comparison between 2D and 3D Control Methods for the Operation of Hovering Objects

This paper experimentally analyzed the cognitive load of users based on different methods of operating hovering objects, such as drones. The traditional gamepad-type control method (2D) was compared with a control method that mapped the movement directions of the drone to the natural manipulation gestures of the user using a Leap Motion device (3D). Twenty participants operated the drone on an obstacle course using the two control methods. The drone’s trajectory was measured using motion-capture equipment with a reflective marker. The distance traveled by the drone, operation time, and trajectory smoothness were calculated and compared between the two control methods. The results showed that when the drone’s movements were mapped to the user’s natural directional gestures, the drone’s 3D movements were perceived as more natural and smoother. A more intuitive drone control method can reduce cognitive load and minimize operational errors, making it more user friendly and efficient. However, due to the users’ lack of familiarity with Leap Motion, it resulted in longer distance and time and lower subjective satisfaction; therefore, a more improved 3D control method over Leap Motion is needed to address the limitations

Structural damage detection using deep learning and FE model updating techniques

Abstract The structural condition can be estimated by various methods. Damage detection, as one of those methods, deals with identifying changes in specific features within structural behavior based on numerical models. Since the method is based on simulation for various damage conditions, there are limitations in applicability due to inevitable discrepancies between the analytical model and the actual structure. Finite element model updating is a technique for establishing a finite element model that can reflect the current state of a target structure based on the measured responses. It is performed based on optimization for various structural parameters, but the final output can converge differently depending on the initial model and the characteristics of the algorithm. Although the updated model may not faithfully replicate the target structure as it is, it can be considered equivalent in terms of the relationship between the structural properties and behavioral characteristics of the target. This allows for the analysis of changes in the mechanical relationships established for the target structure. The change can be related to structural damage, and artificial intelligence technology can provide an alternative solution in such complex problems where analytical approaches are challenging. Taking practical aspects from the aforementioned methods, a novel structural damage detection methodology is presented in this study for identifying the location and extent of the damage. Model updating is used to establish a reference model that reflects the structural characteristics of the target. Training data for various damage conditions based on the reference model allows the artificial intelligence networks to identify damage to the target structure

Complications Reported in Maxillary Skeletal Expansion

Introduction: The aim of this study was to determine the types and prevalence of complications following MARPE protocol at University of the Pacific and to investigate the complication of asymmetry using CBCT analysis. Methods: In the first portion of this study, 97 patients who started treatment prior to July 2020 and who had MARPE expander treatment at the University of the Pacific were included. Chart review and evaluation of progress clinical photographs were used to report the following complications: inflammation, pain, appliance malfunction, broken microscrew, and pulpitis. In the second portion of this study, 77 patients from a private practice orthodontist who started treatment prior to January 2021 were included in this study. The complication of asymmetry was measured using CBCT measurements from T1 (prior to treatment start) and T2 (immediately following MARPE expansion). The change in U6 molar angulation changes was also assessed. Results: It was determined in the first portion of this study that the most common complication was inflammation around the MARPE site, with 82% of the study population exhibiting any severity of inflammation. 3 patients exhibited severe inflammation requiring removal of MARPE. 18% reported pain in the MARPE area. 9 patients exhibited appliance malfunction, 1 patient exhibited broken microscrew, and 1 patient exhibited pulpitis. It was determined in the second portion of this study that 47% of patients exhibited asymmetry greater than 1 mm and the average asymmetry at ANS was 1.47 mm. No correlation was exhibited between amount of asymmetric expansion and the following measures: age, molar inclination, palatal thickness, posterior screw expansion and palatal vault height. 3 Conclusions: Inflammation of the MARPE is the most common complication that can result in early removal of the expander. Other complications such as asymmetry and pain are common as well

Complications Reported in Maxillary Skeletal Expansion

Introduction: The aim of this study was to determine the types and prevalence of complications following MARPE protocol at University of the Pacific and to investigate the complication of asymmetry using CBCT analysis. Methods: In the first portion of this study, 97 patients who started treatment prior to July 2020 and who had MARPE expander treatment at the University of the Pacific were included. Chart review and evaluation of progress clinical photographs were used to report the following complications: inflammation, pain, appliance malfunction, broken microscrew, and pulpitis. In the second portion of this study, 77 patients from a private practice orthodontist who started treatment prior to January 2021 were included in this study. The complication of asymmetry was measured using CBCT measurements from T1 (prior to treatment start) and T2 (immediately following MARPE expansion). The change in U6 molar angulation changes was also assessed. Results: It was determined in the first portion of this study that the most common complication was inflammation around the MARPE site, with 82% of the study population exhibiting any severity of inflammation. 3 patients exhibited severe inflammation requiring removal of MARPE. 18% reported pain in the MARPE area. 9 patients exhibited appliance malfunction, 1 patient exhibited broken microscrew, and 1 patient exhibited pulpitis. It was determined in the second portion of this study that 47% of patients exhibited asymmetry greater than 1 mm and the average asymmetry at ANS was 1.47 mm. No correlation was exhibited between amount of asymmetric expansion and the following measures: age, molar inclination, palatal thickness, posterior screw expansion and palatal vault height. 3 Conclusions: Inflammation of the MARPE is the most common complication that can result in early removal of the expander. Other complications such as asymmetry and pain are common as well

Biodiversity and Community Structure of Mesozooplankton in the Marine and Coastal National Park Areas of Korea

Zooplankton communities are useful bioindicators that can provide information on the changes occurring in marine ecosystems. Therefore, investigation of zooplankton communities in marine and coastal national parks is essential. However, the surveys of zooplankton communities using morphological identification require considerable time and labor. Metabarcoding is a practical alternative that can detect various taxa simultaneously. In this study, metabarcoding was newly applied along with the traditional morphological identification to establish a method for zooplankton community survey in the Marine and Coastal National Park areas of Korea. By comparing the results of these two identification methods, the strengths and limitations of metabarcoding were verified with the zooplankton communities appearing in these areas. The sensitive detection capability of metabarcoding enabled the identification of potential bioindicator taxa associated with external factors (e.g., water temperature, salinity, topography, and chlorophyll a concentration) in these national parks. We propose the use of metabarcoding for efficient surveys of mesozooplankton communities in the Marine and Coastal National Parks to establish monitoring of bioindicator taxa. It is also necessary to continuously search for taxa with high research value in these national parks using metabarcoding. Establishing an ongoing monitoring system that employs this approach can provide an effective tool for managing marine ecosystems in the Marine and Coastal National Parks

SOFT TISSUE EFFECTS FROM MAXILLOMANDIBULAR ADVANCEMENT WITH COUNTERCLOCKWISE ROTATION

Introduction: The purpose of the study was to evaluate the effects of maxillomandibular advancement (MMA) surgery with counterclockwise rotation on soft tissue oral and nasal structures. Materials and Methods: This retrospective study included 34 subjects diagnosed with OSA who underwent MMA at the Stanford Sleep Clinic. Initial (T1) and Final (T2) CBCTs were evaluated and compared for 10 hard tissue and 15 soft tissue measurements. Additionally, the external nasal valve surface area was measured and compared between the two time points. A 3D superimposition was performed and used to evaluate the relative hard and soft tissue movements. Results: There was a linear correlation in the advancement of the maxilla to the sagittal movement of the upper lip of 75%, while the mandibular soft tissue moved 91-93% of the mandibular sagittal position. The interalar width and mouth width increased significantly following surgery while the lower vermillion border length decreased significantly. There was a clinically significant increase in the average surface area of the external nasal valve by 28%. No correlations were found between maxillary impaction and soft tissue oral or nasal measurements. Conclusion: MMA with CCW results in significant changes to the soft tissue nose and oral region. Soft tissue planning must be considered to maintain desirable esthetics following surgery

SOFT TISSUE EFFECTS FROM MAXILLOMANDIBULAR ADVANCEMENT WITH COUNTERCLOCKWISE ROTATION

Introduction: The purpose of the study was to evaluate the effects of maxillomandibular advancement (MMA) surgery with counterclockwise rotation on soft tissue oral and nasal structures. Materials and Methods: This retrospective study included 34 subjects diagnosed with OSA who underwent MMA at the Stanford Sleep Clinic. Initial (T1) and Final (T2) CBCTs were evaluated and compared for 10 hard tissue and 15 soft tissue measurements. Additionally, the external nasal valve surface area was measured and compared between the two time points. A 3D superimposition was performed and used to evaluate the relative hard and soft tissue movements. Results: There was a linear correlation in the advancement of the maxilla to the sagittal movement of the upper lip of 75%, while the mandibular soft tissue moved 91-93% of the mandibular sagittal position. The interalar width and mouth width increased significantly following surgery while the lower vermillion border length decreased significantly. There was a clinically significant increase in the average surface area of the external nasal valve by 28%. No correlations were found between maxillary impaction and soft tissue oral or nasal measurements. Conclusion: MMA with CCW results in significant changes to the soft tissue nose and oral region. Soft tissue planning must be considered to maintain desirable esthetics following surgery

Application of Volatile Antifungal Plant Essential Oils for Controlling Pepper Fruit Anthracnose by Colletotrichum gloeosporioides

Anthracnose caused by Colletotrichum gloeosporioides has been destructive during pepper fruit production in outdoor fields in Korea. In vitro antifungal activities of 15 different plant essential oils or its components were evaluated during conidial germination and mycelial growth of C. gloeosporioides. In vitro conidial germination was most drastically inhibited by vapour treatments with carvacrol, cinnamon oil, trans-cinnamaldehyde, citral, p-cymene and linalool. Inhibition of the mycelial growth by indirect vapour treatment with essential oils was also demonstrated compared with untreated control. Carvacrol, cinnamon oil, trans-cinnamaldehyde, citral and eugenol were among the most inhibitory plant essential oils by the indirect antifungal efficacies. Plant protection efficacies of the plant essential oils were demonstrated by reduced lesion diameter on the C. gloeosporioides-inoculated immature green pepper fruits compared to the inoculated control fruits without any plant essential oil treatment. In planta test showed that all plant essential oils tested in this study demonstrated plant protection efficacies against pepper fruit anthracnose with similar levels. Thus, application of different plant essential oils can be used for eco-friendly disease management of anthracnose during pepper fruit production