Re-evaluating California’s greenhouse gas emission law: Is it rational under the current economic situation?

This research evaluates the impact of the economic recession on the California Air Resource Board (CARB) strategy for reducing current greenhouse gas (GHG) emissions from motor vehicles. The principle potential contribution of this work is that it evaluated whether the rationale behind the CARB strategy is or is not valid under the current, unanticipated economic recession

Flexible strain sensor enabled by carbon nanotubes-decorated electrospun TPU membrane for human motion monitoring

High-performance flexible strain sensors are gaining more and more attention with their bespoken detection range, excellent sensing performance and good stability, which are highly desired in the wearable electronics. Herein, a thermoplastic polyurethane elastomer (TPU) fibrous membrane was prepared as a flexible substrate by electrostatic spinning technology, then a coating of polydopamine was formed through fast synthesizing the dopamine on TPU fibrous membrane surface and loaded with CNTs to develop an extremely sensitive flexible strain sensor. The flexible sensor prepared by TPU fibrous membrane coated with polydopamine layer has an outstanding sensibility under the pulling force (GF of 10528.53 with 200 strain), rapid reaction time (188-221 ms), wide sensing range (up to 200), good stability and durability. The theoretical studies reveals that the underlying cause for the high sensitivity and the inherit relationship between the amount of conducting routes and the length between adjacent conducting fillers in the sensor. The demonstration of device shows a promising application to sense the human motion at various locations of body, with accurate and stable electrical signal output generated at corresponding motion

Facile green synthesis of magnesium oxide nanoparticles using tea (Camellia sinensis) extract for efficient photocatalytic degradation of methylene blue dye

Herein, we report, for the first time, the synthesis, characterization, and the photocatalytic methyl blue dye degradation performance of magnesium oxide (MgO) nanoparticles (NPs) synthesized by a facile green approach using Camellia sinensis (tea leaves) extract as a reducing agent. The as-prepared materials were characterized by x-ray diffraction (XRD), which confirmed the large-scale synthesis of well crystalline cubic crystalline phase MgO NPs. Rietveld refinement analysis of the XRD pattern was done to determine the crystallographic parameters of the MgO NPs and to investigate lattice defects. Microstrain, lattice stress and energy density were calculated using Williamson-Hall analysis The synthesized nanoparticles exhibited over 97% photocatalytic degradation efficiency of methylene blue (MB) dye. Complementary density functional theory (DFT) calculations revealed the favorable formation of O 2 − radicals on the MgO (001) surface as the drivers of the MB dye degradation

Mechanically-robust electrospun nanocomposite fiber membranes for oil and water separation

Mechanically-robust nanocomposite membranes have been developed via crosslinking chemistry and electrospinning technique based on the rational selection of dispersed phase materials with high Young's modulus (i.e., graphene and multiwalled carbon nanotubes) and Cassie-Baxter design and used for oil and water separation. Proper selection of dispersed phase materials can enhance the stiffness of nanocomposite fiber membranes while their length has to be larger than their critical length. Chemical modification of the dispersed phase materials with fluorochemcials and their induced roughness were critical to achieve superhydrophobocity. Surface analytic tools including goniometer, X-ray photoelectron spectroscopy (XPS), Fourier transform infrared (FTIR) spectroscopy, Raman spectroscopy, atomic force microscopy (AFM) and scanning electron microscope (SEM) were applied to characterize the superhydrophobic nanocomposite membranes. An AFM-based nanoindentation technique was used to measure quantitativly the stiffness of the nanocomposite membranes for local region and whole composites, compared with the results by a tensile test technique. Thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC) techniques were used to confirm composition and formation of nanocomposite membranes. These membranes demonstrated excellent oil/water separation. This work has potential application in the field of water purification and remediation

Carbon Nanodots as a Potential Transport Layer for Boosting Performance of All-Inorganic Perovskite Nanocrystals-Based Photodetector

A low-cost and simple drop-casting method was used to fabricate a carbon nanodot (C-dot)/all-inorganic perovskite (CsPbBr3) nanosheet bilayer heterojunction photodetector on a SiO2/Si substrate. The C-dot/perovskite bilayer heterojunction photodetector shows a high performance with a responsivity (R) of 1.09 A/W, almost five times higher than that of a CsPbBr3-based photodetector (0.21 A/W). In addition, the hybrid photodetector exhibits a fast response speed of 1.318/1.342 µs and a highly stable photocurrent of 6.97 µA at 10 V bias voltage. These figures of merits are comparable with, or much better than, most reported perovskite heterojunction photodetectors. UV–Vis absorption and photoluminescent spectra measurements reveal that the C-dot/perovskite bilayer heterojunction has a band gap similar to the pure perovskite layer, confirming that the absorption and emission in the bilayer heterojunction is dominated by the top layer of the perovskite. Moreover, the emission intensity of the C-dot/perovskite bilayer heterojunction is less than that of the pure perovskite layer, indicating that a significant number of charges were extracted by the C-dot layer. The studied band alignment of the C-dots and perovskites in the dark and under emission reveals that the photodetector has a highly efficient charge separation mechanism at the C-dot/perovskite interface, where the recombination rate between photogenerated electrons and holes is significantly reduced. This highly efficient charge separation mechanism is the main reason behind the enhanced performance of the C-dot/perovskite bilayer heterojunction photodetector

p-CuO/n-ZnO Heterojunction Structure for the Selective Detection of Hydrogen Sulphide and Sulphur Dioxide Gases: A Theoretical Approach

DFT calculations at the B3LYP/LanL2DZ level of theory were utilized to investigate the adsorption of H2S and SO2 gases on the electronic properties of CuO-ZnO heterojunction structures. The results were demonstrated from the standpoint of adsorption energies (Eads), the density of states (DOS), and NBO atomic charges. The obtained values of the adsorption energies indicated the chemisorption of the investigated gases on CuO-ZnO heterojunction. The adsorption of H2S and SO2 gases reduced the HOMO-LUMO gap in the Cu2Zn10O12 cluster by 4.98% and 43.02%, respectively. This reveals that the Cu2Zn10O12 cluster is more sensitive to the H2S gas than the SO2 gas. The Eads values for SO2 and H2S were −2.64 and −1.58 eV, respectively. Therefore, the Cu2Zn10O12 cluster exhibits a higher and faster response-recovery time to H2S than SO2. Accordingly, our results revealed that CuO-ZnO heterojunction structures are promising candidates for H2S- and SO2-sensing applications

Influence of Efficient Thickness of Antireflection Coating Layer of HfO₂ for Crystalline Silicon Solar Cell

Anti-reflective coating (ARC) layers on silicon (Si) solar cells usually play a vital role in the amount of light absorbed into the cell and protect the device from environmental degradation. This paper reports on the thickness optimization of hafnium oxide (HfO2) as an ARC layer for high-performance Si solar cells with PC1D simulation analysis. The deposition of the HfO2 ARC layer on Si cells was carried out with a low-cost sol-gel process followed by spin coating. The thickness of the ARC layer was controlled by varying the spinning speed. The HfO2 ARC with a thickness of 70 nm possessed the lowest average reflectance of 6.33% by covering wavelengths ranging from 400–1000 nm. The different thicknesses of HfO2 ARC layers were used as input parameters in a simulation study to explore the photovoltaic characteristics of Si solar cells. The simulation findings showed that, at 70 nm thickness, Si solar cells had an exceptional external quantum efficiency (EQE) of 98% and a maximum power conversion efficiency (PCE) of 21.15%. The thicknesses of HfO2 ARC considerably impacted the photovoltaic (PV) characteristics of Si solar cells, leading to achieving high-performance solar cells

Influence of Efficient Thickness of Antireflection Coating Layer of HfO2 for Crystalline Silicon Solar Cell

Anti-reflective coating (ARC) layers on silicon (Si) solar cells usually play a vital role in the amount of light absorbed into the cell and protect the device from environmental degradation. This paper reports on the thickness optimization of hafnium oxide (HfO2) as an ARC layer for high-performance Si solar cells with PC1D simulation analysis. The deposition of the HfO2 ARC layer on Si cells was carried out with a low-cost sol-gel process followed by spin coating. The thickness of the ARC layer was controlled by varying the spinning speed. The HfO2 ARC with a thickness of 70 nm possessed the lowest average reflectance of 6.33% by covering wavelengths ranging from 400–1000 nm. The different thicknesses of HfO2 ARC layers were used as input parameters in a simulation study to explore the photovoltaic characteristics of Si solar cells. The simulation findings showed that, at 70 nm thickness, Si solar cells had an exceptional external quantum efficiency (EQE) of 98% and a maximum power conversion efficiency (PCE) of 21.15%. The thicknesses of HfO2 ARC considerably impacted the photovoltaic (PV) characteristics of Si solar cells, leading to achieving high-performance solar cells

Highly Sensitive and Selective Eco-Toxic 4-Nitrophenol Chemical Sensor Based on Ag-Doped ZnO Nanoflowers Decorated with Nanosheets

Herein, we have developed a novel sensing electrode to detect the eco-toxic 4-nitrophenol (4-NP). Ag-doped-ZnO nanoflowers were synthesized by facile hydrothermal method and examined by several characterization techniques in order to understand the morphology, crystal structure, composition, and surface properties. Morphological results were confirmed by the formation of Ag-doped ZnO nanoflowers decorated with nanosheets. Ag-doped ZnO/glassy carbon electrode (GCE) electrode-material-matrix was used for electrochemical sensing of toxic 4-NP. Under optimized conditions, Ag-doped ZnO/GCE modified electrode exhibits high-sensitivity and selectivity compared to the bare GCE electrode. The Ag-doped ZnO/GCE modified electrode exhibits high electrocatalytic oxidation towards 4-NP. Anodic peak current of 4-NP is increased linearly by increasing the concentration of nitrophenol. Additionally, Ag-doped ZnO/GCE shows a wide range of sensitivity from 10 µM to 500 µM, and a linear calibration plot with a good detection limit of 3 µM (S/N = 3). The proposed Ag-doped ZnO/GCE modified electrode showed high sensing stability. In addition, the oxidation mechanism was studied. The obtained results revealed that the Ag-ZnO/GCE electrode could be the promising sensing electrode for 4-NP sensing