Analysis of melt-textured YBCO with nanoscale inclusions

Recently, particles with the chemical composition Y2Ba 4CuMOx where M U, Nb, Zr, etc., and sizes in the range of 50 - 200 nm have been generated within the YBCO matrix of bulk, melt-processed superconductors in order to serve as effective flux pinning sites. By means of AFM and electron backscatter diffraction (EBSD) measurements, we analyse the spatial distribution and the size distribution of these nanoparticles within the superconducting YBCO matrix

Nano-composite single grain YBa2Cu3O 7-δ/Y2Ba4CuBiOy bulk superconductors

We have succeeded recently in synthesizing a chemically stable, inert family of materials of composition Y2Ba4CuMOy (Y-2411 where M Nb, Ta, Mo, W, Zr, Hf) within the superconducting YBa 2Cu3O7-δ (Y-123) phase matrix that forms effective flux pinning centers of nano-scale dimensions. In this paper we report the synthesis of the Y2Ba4CuBiOy phase with nano-scale dimensions that is similarly compatible with the Y-123 matrix and which does not impair the properties of the bulk superconductor. YBa 2Cu3O7-δ/Y2BaCuO5 (Y-123/Y-211) precursor powders enriched with various amounts of Bi 2O3 and Y2Ba4CuBiOy have been fabricated successfully in the form of large, single grains by the top seeded melt growth (TSMG) process. Microstructural studies of these composites reveal the presence of nanometer-sized Y2Ba4CuBiO y and much larger Y-211 phase particles (∼1 νm) embedded in the Y-123 phase matrix. The critical current density of the nano-composites is observed to increase significantly compared to undoped YBCO. © 2006 IOP Publishing Ltd

Investigation of grain orientations of melt-textured HTSC with addition of uranium oxide, Y2O3 and Y2BaCuO5

Local grain orientations were studied in melt-textured YBCO samples processed with various amounts of depleted uranuim oxide (DU) and Y 2O3 by means of electron backscatter diffraction (EBSD) analysis. The addition of DU leads to the formation of Ucontaining nanoparticles (Y2Ba4CuUOx) with sizes of around 200 nm, embedded in the superconducting Y-123 matrix. The orientation of the Y 2BaCuO5 (Y-211) particles, which are also present in the YBCO bulk microstructure, is generally random as is the case in other melttextured Y-123 samples. The presence of Y-211 particles, however, also affects the orientation of the Y-123 matrix in these samples

EBSD characterisation of Y2Ba4CuUOx phase in melttextured YBCO with addition of depleted uranium oxide

Melt-textured YBCO samples processed with added Y2O3 and depleted uranium oxide (DU) contain nano-particles, which have been identified previously as Y2Ba4CuUOx (U-411). This phase has a cubic unit cell, which is clearly distinct from the orthorhombic Y-123 and Y-211 phases within the YBCO system. In samples with a high amount of DU addition (0.8 wt-% DU), U-2411 particles have sizes between 200 nm and several νm, so identification of the Kikuchi patterns of this phase becomes possible. Together with a parallel EDX analysis, the particles embedded in the Y-123 matrix can be identified unambiguously. In this way, a three-phase EBSD scan becomes possible, allowing also the identification of nanometre-sized particles in the sample microstructure

Image Pre-processing Algorithms for Detection of Small/Point Airborne Targets

The problem of detecting small/point targets in infra-red imagery is an important research area for defence applications. The challenge is to achieve high sensitivity for detection of dim point like small targets with low false alarms and high detection probability. To detect the target in such scenario, pre-processing algorithms are used to predict the complex background and then to subtract predicted background from the original image. The difference image is passed to the detection algorithm to further distinguish between target and background and/or noise. The aim of the study is to fit the background as closely as possible in the original image without diminishing the target signal. A number of pre-processing algorithms (spatial, temporal and spatio-temporal) have been reported in the literature. In this paper a survey of different pre-processing algorithm is presented. An improved hybrid morphological filter, which provides high gain in signal-to-noise plus clutter ratio (SCNR), has been proposed for detection of small/point targets.Defence Science Journal, 2009, 59(2), pp.166-174, DOI:http://dx.doi.org/10.14429/dsj.59.150

Growth rate and superconducting properties of Gd-Ba-Cu-O bulk superconductors melt processed in air

A generic Mg-doped Nd-Ba-Cu-O seed crystal has been developed recently for the fabrication of any type of rare earth (RE) based (RE)-Ba-Cu-O single grain bulk superconductor in air. The new generic seed simplifies significantly the top seeded melt growth (TSMG) process for light rare earth based (Nd, Sm, Gd, or mixed rare earth elements) bulk superconductors, in particular. GdBCO single grains have been fabricated successfully in air using the new seed in a cold-seeding process. In this study, precursor powders were enriched with different amounts of BaO2 to investigate the extent of substitution of Gd for Ba in the Gd1+xBa2-xCu3O7-delta solid solution phase. The growth process of large single grains in air was investigated at various growth temperatures under isothermal processing conditions. Crystal growth rate as a function of under-cooling and BaO2 content has been determined from these experiments. The spatial variation of Tc and transition temperature width for applied field aligned along the a/b and c-axis of grains fabricated with different BaO2 content has also been investigated in order to understand the extent of the formation of Gd/Ba solid solution with varying growth temperature and precursor composition. These results have been used to establish the optimum conditions for fabricating solid solution-free, large single grains of GdBCO in air

Strongly coupled artificial bulk HTS grain boundaries with high critical current densities

A multi-seeding process has been developed to fabricate single Y-Ba-Cu-O (YBCO) grains containing strong artificial grain boundaries. Multi-seeding of heterogeneous YBCO grains with controlled orientation was achieved using large Sm-Ba-Cu-O (SmBCO) single crystal seeds of rod-like geometry with slots of various widths (up to 13 mm) cut into their bottom surface (i.e. parallel to the c-axis of the seed) to produce a bridge-like structure. Several YBCO grains with artificial grain boundaries were fabricated from these seed crystals and used to investigate the effect of varying the distance between the individual grain nucleation sites and the grain orientation (in-plane and out of plane) on the nature of grain boundaries. The measured local magnetic critical current density (Jc) and the magnitude of the trapped field across these artificial grain boundaries indicate that seed alignment is a key parameter in achieving strongly-coupled grain boundaries in multi-seeded grains

Investigation of Inositol dehydrogenase-related enzymes

Inositol dehydrogenase (IDH) catalyzes the oxidation of myo-inositol to scyllo-inosose using NAD+ as the coenzyme. IDH-related genes (Lp_iolG1 to Lp_iolG4) from Lactobacillus plantarum WCSF1 and (Lc_iolG1 and Lc_iolG2) from Lactobacillus casei BL23 were cloned into the vector pQE-80L, expressed in E. coli host cells and the proteins were purified to homogeneity. IDH activity of the purified enzymes was explored with myo-inositol and other structurally related compounds. It was found that IDH-related enzymes from L. plantarum WCSF1 did not exhibit any activity with tested substrates but, LcIDH1 and LcIDH2 from L. casei BL23 showed activity with myo-inositol and other related compounds. pH-rate profile studies have demonstrated the optimum pH for the reactions catalyzed by the active enzymes. Steady-state kinetics of the active enzymes was performed as with IDH from Bacillus subtilis (BsIDH), revealing that LcIDH1 is a myo-inositol dehydrogenase and LcIDH2 is a scyllo-inositol dehydrogenase. Both LcIDH1 and LcIDH2 are observed to be NAD+-dependent. Kinetic isotopic effect experiments for LcIDH1 have demonstrated that the chemical step in the reaction is partly rate-limiting. Substrate spectrum of LcIDH1 and LcIDH2 was explored and compared to BsIDH. Finally, a multiple sequence alignment of IDH-related enzymes was performed and the proposed consensus sequence motifs were considered to understand the activity differences between these enzymes

Characterization of nano-composite M-2411/Y-123 thin films by electron backscatter diffraction and in-field critical current measurements

Thin films of nano-composite Y-Ba-Cu-O (YBCO) superconductors containing nano-sized, non-superconducting particles of Y2Ba 4CuMOx (M-2411 with M = Ag and Nb) have been prepared by the PLD technique. Electron backscatter diffraction (EBSD) has been used to analyze the crystallographic orientation of nano-particles embedded in the film microstructure. The superconducting YBa2Cu3O7 (Y-123) phase matrix is textured with a dominant (001) orientation for all samples, whereas the M-2411 phase exhibits a random orientation. Angular critical current measurements at various temperature (T) and applied magnetic field (B) have been performed on thin films containing different concentration of the M-2411 second phase. An increase in critical current density J c at T < 77 K and B < 6 T is observed for samples with low concentration of the second phase (2 mol % M-2411). Films containing 5 mol % Ag-2411 exhibit lower Jc than pure Y-123 thin films at all fields and temperatures. Samples with 5 mol % Nb-2411 show higher Jc(B) than phase pure Y-123 thin films for T < 77 K

Fabrication of metal matrix composites under intensive shearing

Current processing methods for metal matrix composites (MMC) often produces agglomerated reinforced particles in the ductile matrix and also form unwanted brittle secondary phases due to chemical reaction between matrix and the reinforcement. As a result they exhibit extremely low ductility. In addition to the low ductility, the current processing methods are not economical for producing engineering components. In this paper we demonstrate that these problems can be solved to a certain extent by a novel rheo-process. The key step in this process is application of sufficient shear stress on particulate clusters embedded in liquid metal to overcome the average cohesive force of the clusters. Very high shear stress can be achieved by using the specially designed twin-screw machine, developed at Brunel University, in which the liquid undergoes high shear stress and high intensity of turbulence. Experiments with Al alloys and SiC reinforcement reveal that, under high shear stress and turbulence conditions Al liquid penetrates into the clusters and disperse the individual particle within the cluster, thus leading to a uniform microstructure