146 research outputs found
Study on Preventive Maintenance Strategies of Filling Equipment Based on Reliability-Cantered Maintenance
In order to ensure normal operation of enterprise production activities and enhance the competitiveness of enterprise, equipment management and maintenance strategy formulation has always been one of important contents of daily management of enterprise. According to the actual requirement of a Chinese beer production enterprise, preventive maintenance strategy of filling equipment is put forward based on reliability-centred maintenance (RCM). Firstly, on the basis of analyzing RCM theory and equipment maintenance, the general process of failure analysis of beer production equipment is presented. Secondly, the general production process of bottled beer is analyzed, and the composition of major filling equipment is also introduced in the beer production line. With the help of key indicators of equipment reliability, such as mean time between failure (MTBF), mean time to repair restoration (MTTR) and availability Ai, the fault analysis of filling production line is carried out, and the relevant results are calculated. Then, process failure mode and effect analysis (PFMEA) of filling machine is implemented, and fault tree analysis (FTA) of potential failure modes with high risk priority numbers is also completed. Finally, preventive and maintenance strategies of filling equipment are established on the basis of RCM. Through the research in this paper, maintenance costs and unplanned breakdown hours can be significantly reduced
Detection of roton and phonon excitations in a spin-orbit coupled Bose-Einstein condensate with a moving barrier
We propose to detect phonon and roton excitations in a two-dimensional
Bose-Einstein condensate with Raman-induced spin-orbit coupling by perturbing
the atomic cloud with a weak barrier. The two excitation modes can be observed
by moving the barrier along different directions in appropriate parameter
regimes. Phonon excitations are identified by the appearance of solitary waves,
while roton excitations lead to distinctive spatial density modulations. We
show that this method can also be used to determine the anisotropic critical
velocities of superfluid.Comment: 7 pages, 5 figure
U.S. census unit population exposures to ambient air pollutants
<p>Abstract</p> <p>Background</p> <p>Progress has been made recently in estimating ambient PM<sub>2.5 </sub>(particulate matter with aerodynamic diameter < 2.5 Ī¼m) and ozone concentrations using various data sources and advanced modeling techniques, which resulted in gridded surfaces. However, epidemiologic and health impact studies often require population exposures to ambient air pollutants to be presented at an appropriate census geographic unit (CGU), where health data are usually available to maintain confidentiality of individual health data. We aim to generate estimates of population exposures to ambient PM<sub>2.5 </sub>and ozone for U.S. CGUs.</p> <p>Methods</p> <p>We converted 2001-2006 gridded data, generated by the U.S. Environmental Protection Agency (EPA) for CDC's (Centers for Disease Control and Prevention) Environmental Public Health Tracking Network (EPHTN), to census block group (BG) based on spatial proximities between BG and its four nearest grids. We used a bottom-up (fine to coarse) strategy to generate population exposure estimates for larger CGUs by aggregating BG estimates weighted by population distribution.</p> <p>Results</p> <p>The BG daily estimates were comparable to monitoring data. On average, the estimates deviated by 2 Ī¼g/m<sup>3 </sup>(for PM<sub>2.5</sub>) and 3 ppb (for ozone) from their corresponding observed values. Population exposures to ambient PM<sub>2.5 </sub>and ozone varied greatly across the U.S. In 2006, estimates for daily potential population exposure to ambient PM<sub>2.5 </sub>in west coast states, the northwest and a few areas in the east and estimates for daily potential population exposure to ambient ozone in most of California and a few areas in the east/southeast exceeded the National Ambient Air Quality Standards (NAAQS) for at least 7 days.</p> <p>Conclusions</p> <p>These estimates may be useful in assessing health impacts through linkage studies and in communicating with the public and policy makers for potential intervention.</p
Spin-orbit-coupling-induced phase separation in trapped Bose gases
In a trapped spin-1/2 Bose-Einstein condensate with miscible interactions, a
two-dimensional spin-orbit coupling can introduce an unconventional spatial
separation between the two components. We reveal the physical mechanism of such
a spin-orbit-coupling-induced phase separation. Detailed features of the phase
separation are identified in a trapped Bose-Einstein condensate. We further
analyze differences of phase separation in Rashba and anisotropic
spin-orbit-coupled Bose gases. An adiabatic splitting dynamics is proposed as
an application of the phase separation.Comment: 10 pages, 7 figure
Plastic zone distribution and main controlling factors analysis of large mining height face in steeply dipping coal seam
Coal wall of large mining height face in steeply dipping coal seam has large free height, wide free movement space and poor self-stabilization balance, coal wall is not an isolated body in the face, it can form a load-bearing structure with the surrounding rock, supports and other mediators, and the mining behavior is closely linked. The dip angle effect can easily promote the dissimilation of the coal wall bearing environment, complicate its response behavior, increase the difficulty of coal wall and surrounding rock stability control, and restrict the safe and efficient production of the face. In order to solve the problem of coal wall stability control of large mining height face in steeply dipping coal seam, theoretical analysis and numerical calculation are comprehensively used for research. The stress in the plastic zone of large mining height face in steeply dipping coal seam increases exponentially, there is an asymmetric arch residual stress influence zone in the vicinity of the coal wall, the plastic zone breadth is dissimilated in different regions, and the width from large to small is the upper, middle and lower part, and the distribution pattern is in the shape of stepped arch, coal in the plastic zone bears repeated pressure, and will be enhanced with the expansion of plastic zone. As the mining height increases, the residual abutment pressure near the coal wall decreases, the compressive strength, displacement value and disturbed range of the coal in front of the coal wall will increase. The stress and transport of the coal wall under the dip angle effect develop in a zonal manner, in which the stress distribution is lower> upper> middle, while for the displacement is middle> upper> lower. In addition, the working face inclination under the oblique angle will lead to the transformation of the coal wall instability mode, when the oblique angle is large, the dip angle of face is small, the compression component of abutment pressure is enhanced, and the external convex spalling mainly occurs. On the contrary, itās the sliding instability under the coupling of mining stress and self weight. The comprehensive analysis shows that the coal wall mining behavior is regionally heterogeneous under the coupling effect of dip angle and mining height, and because the stress unloading and migration in the middle and upper part of the face are larger, therefore the two regions should be the key prevention and control areas for coal wall instability of large mining height face in steeply dipping panel
U.S. congressional district cancer death rates
BACKGROUND: Geographic patterns of cancer death rates in the U.S. have customarily been presented by county or aggregated into state economic or health service areas. Herein, we present the geographic patterns of cancer death rates in the U.S. by congressional district. Many congressional districts do not follow state or county boundaries. However, counties are the smallest geographical units for which death rates are available. Thus, a method based on the hierarchical relationship of census geographic units was developed to estimate age-adjusted death rates for congressional districts using data obtained at county level. These rates may be useful in communicating to legislators and policy makers about the cancer burden and potential impact of cancer control in their jurisdictions. RESULTS: Mortality data were obtained from the National Center for Health Statistics (NCHS) for 1990ā2001 for 50 states, the District of Columbia, and all counties. We computed annual average age-adjusted death rates for all cancer sites combined, the four major cancers (lung and bronchus, prostate, female breast, and colorectal cancer) and cervical cancer. Cancer death rates varied widely across congressional districts for all cancer sites combined, for the four major cancers, and for cervical cancer. When examined at the national level, broad patterns of mortality by sex, race and region were generally similar with those previously observed based on county and state economic area. CONCLUSION: We developed a method to generate cancer death rates by congressional district using county-level mortality data. Characterizing the cancer burden by congressional district may be useful in promoting cancer control and prevention programs, and persuading legislators to enact new cancer control programs and/or strengthening existing ones. The method can be applied to state legislative districts and other analyses that involve data aggregation from different geographic units
Attitude Determination Method by Fusing Single Antenna GPS and Low Cost MEMS Sensors Using Intelligent Kalman Filter Algorithm
For meeting the demands of cost and size for micronavigation system, a combined attitude determination approach with sensor fusion algorithm and intelligent Kalman filter (IKF) on low cost Micro-Electro-Mechanical System (MEMS) gyroscope, accelerometer, and magnetometer and single antenna Global Positioning System (GPS) is proposed. The effective calibration method is performed to compensate the effect of errors in low cost MEMS Inertial Measurement Unit (IMU). The different control strategies fusing the MEMS multisensors are designed. The yaw angle fusing gyroscope, accelerometer, and magnetometer algorithm is estimated accurately under GPS failure and unavailable sideslip situations. For resolving robust control and characters of the uncertain noise statistics influence, the high gain scale of IKF is adjusted by fuzzy controller in the transition process and steady state to achieve faster convergence and accurate estimation. The experiments comparing different MEMS sensors and fusion algorithms are implemented to verify the validity of the proposed approach
Advances in targeted therapy for acute myeloid leukemia.
Acute myeloid leukemia (AML) is a clonal malignancy characterized by genetic heterogeneity due to recurrent gene mutations. Treatment with cytotoxic chemotherapy has been the standard of care for more than half of a century. Although much progress has been made toward improving treatment related mortality rate in the past few decades, long term overall survival has stagnated. Exciting developments of gene mutation-targeted therapeutic agents are now changing the landscape in AML treatment. New agents offer more clinical options for patients and also confer a more promising outcome. Since Midostaurin, a FLT3 inhibitor, was first approved by US FDA in 2017 as the first gene mutation-targeted therapeutic agent, an array of new gene mutation-targeted agents are now available for AML treatment. In this review, we will summarize the recent advances in gene mutation-targeted therapies for patients with AML
- ā¦