36 research outputs found
Investigation of the microcrack evolution in a Ti-based bulk metallic glass matrix composite
AbstractThe initiation and evolution behavior of the shear-bands and microcracks in a Ti-based metallic-glass–matrix composite (MGMC) were investigated by using an in-situ tensile test under transmission electron microscopy (TEM). It was found that the plastic deformation of the Ti-based MGMC related with the generation of the plastic deformation zone in crystalline and shear deformation zone in glass phase near the crack tip. The dendrites can suppress the propagation of the shear band effectively. Before the rapid propagation of cracks, the extending of plastic deformation zone and shear deformation zone ahead of crack tip is the main pattern in the composite
Development of Low-Threshold Detectors for Low-Mass Dark Matter Searches Using an N-Type Germanium Detector at 5.2 K
We investigated charge transport in an n-type germanium detector at 5.2 K to
explore new technology for enhancing low-mass dark matter detection
sensitivity. Calculations of dipole and cluster dipole state binding energies
and electric field-dependent trapping cross-sections are critical to developing
low-threshold detectors. The detector operates in two modes: depleting at 77K
before cooling, or directly cooling to 5.2 K and applying different bias
voltages. Results indicated lower binding energy of charge states in the second
mode, at zero field and under an electric field, suggesting different charge
states formed under different operating modes. Measured cluster dipole and
dipole state binding energies at zero field were 7.8840.644 meV and
8.3690.748 meV, respectively, signifying high low-threshold potential for
low-mass dark matter searches in the future.Comment: 7 pages, 8 figure
Development of low-threshold detectors for low-mass dark matter searches with a p-type germanium detector operated at cryogenic temperature
This study investigates new technology for enhancing the sensitivity of
low-mass dark matter detection by analyzing charge transport in a p-type
germanium detector at 5.2 K. To achieve low-threshold detectors, precise
calculations of the binding energies of dipole and cluster dipole states, as
well as the cross-sections of trapping affected by the electric field, are
essential. The detector was operated in two modes: depleted at 77 K before
cooling to 5.2 K and cooled directly to 5.2 K with various bias voltages. Our
results indicate that the second mode produces lower binding energies and
suggests different charge states under varying operating modes. Notably, our
measurements of the dipole and cluster dipole state binding energies at zero
fields were meV and meV, respectively. These
findings have strong implications for the development of low-threshold
detectors for detecting low-mass dark matter in the future.Comment: 7 pages, 8 figures. arXiv admin note: substantial text overlap with
arXiv:2302.0841
GJB2 mutation spectrum in 2063 Chinese patients with nonsyndromic hearing impairment
Background: Mutations in GJB2 are the most common molecular defects responsible for autosomal recessive nonsyndromic hearing impairment (NSHI). The mutation spectra of this gene vary among different ethnic groups. Methods: In order to understand the spectrum and frequency of GJB2 mutations in the Chinese population, the coding region of the GJB2 gene from 2063 unrelated patients with NSHI was PCR amplified and sequenced. Results: A total of 23 pathogenic mutations were identified. Among them, five (p.W3X, c.99delT, c.155_c.158delTCTG, c.512_c.513insAACG, and p.Y152X) are novel. Three hundred and seven patients carry two confirmed pathogenic mutations, including 178 homozygotes and 129 compound heterozygotes. One hundred twenty five patients carry only one mutant allele. Thus, GJB2 mutations account for 17.9% of the mutant alleles in 2063 NSHI patients. Overall, 92.6% (684/739) of the pathogenic mutations are frame-shift truncation or nonsense mutations. The four prevalent mutations; c.235delC, c.299_c.300delAT, c.176_c.191del16, and c.35delG, account for 88.0% of all mutantalleles identified. The frequency of GJB2 mutations (alleles) varies from 4% to 30.4% among different regions of China. It also varies among different sub-ethnic groups. Conclusion: In some regions of China, testing of the three most common mutations can identify at least one GJB2 mutant allele in all patients. In other regions such as Tibet, the three most common mutations account for only 16% the GJB2 mutant alleles. Thus, in this region, sequencing of GJB2 would be recommended. In addition, the etiology of more than 80% of the mutant alleles for NSHI in China remains to be identified. Analysis of other NSHI related genes will be necessary
Influence of Solvent and Electrical Voltage on Cathode Plasma Electrolytic Deposition of Al2O3 Antioxidation Coatings on Ti-45Al-8.5Nb Alloys
Al2O3 coatings were prepared on Ti-45Al-8.5Nb alloys via cathodic plasma electrolysis deposition (CPED) in both 1.2 M Al(NO3)3 aqueous and ethanolic solutions. Different voltages were also applied during the deposition process to optimize coating properties. Coatings deposited in both solutions mainly consisted of γ-Al2O3, with some Al(OH)3 found in coatings prepared in aqueous solution. Coatings prepared in ethanol solution exhibited better oxidation resistance at 900 °C as well as better substrate adhesion, which was mainly due to smaller crater sizes on coating surfaces. The deposition process was discussed in detail and the reason for the smaller craters examined. The results suggested that solution surface tension mainly influenced the average diameter of hydrogen bubbles that formed on cathode surfaces during the process. Smaller bubbles lead to both lower current densities on cathodes and smaller crater sizes on coatings
Impact Evaluation of Cyberattacks on Connected and Automated Vehicles in Mixed Traffic Flow and Its Resilient and Robust Control Strategy
Connected and automated vehicles (CAVs) present significant potential for improving road safety and mitigating traffic congestion for the future mobility system. However, cooperative driving vehicles are more vulnerable to cyberattacks when communicating with each other, which will introduce a new threat to the transportation system. In order to guarantee safety aspects, it is also necessary to ensure a high level of information quality for CAV. To the best of our knowledge, this is the first investigation on the impacts of cyberattacks on CAV in mixed traffic (large vehicles, medium vehicles, and small vehicles) from the perspective of vehicle dynamics. The paper aims to explore the influence of cyberattacks on the evolution of CAV mixed traffic flow and propose a resilient and robust control strategy (RRCS) to alleviate the threat of cyberattacks. First, we propose a CAV mixed traffic car-following model considering cyberattacks based on the Intelligent Driver Model (IDM). Furthermore, a RRCS for cyberattacks is developed by setting the acceleration control switch and its impacts on the mixed traffic flow are explored in different cyberattack types. Finally, sensitivity analyses are conducted in different platoon compositions, vehicle distributions, and cyberattack intensities. The results show that the proposed RRCS of cyberattacks is robust and can resist the negative threats of cyberattacks on the CAV platoon, thereby providing a theoretical basis for restoring the stability and improving the safety of the CAV
Effects of Al and Mo on Microstructure and Hardness of As-Cast TNM TiAl Alloys
The effects of Al and Mo elements on the microstructure and hardness of TNM TiAl alloys (Ti-43.5Al-4Nb-1Mo-0.1B) were studied by decreasing 0.5 at.% Mo and/or increasing 1.5 at.% Al. The results showed that the changed composition of the alloy had a slight influence on the morphology, but had important effects on the volume fraction, size, and composition of each phase. All the alloys had nearly full lamellar (NL) microstructures, with a few βo phases at the boundaries of the colony or in the lamellar colony. The lamellar colony size and the lamellar spacing increased with the decrease in Mo and the increase in Al. The reduction in Mo content reduced the content of each phase in proportion, but the increase in Al content in the alloys led to the corresponding increase in Al content in the α2 and γ phases. The hardness of the alloys decreased with the increase in Al content and the decrease in Mo content. This is mainly due to the increase in lamellar spacing caused by the change in composition. Therefore, the increased content of Al and decreased Mo content are unbeneficial for the microstructure. The relationship between the Vickers hardness and the lamellar spacing obeyed the Hall–Petch relationship
Experimental Phase Equilibria and Isopleth Section of 8Nb-TiAl Alloys
The 8Nb isopleth section of a Ti-Al-Nb system is experimentally determined based on thermal analysis and thermodynamic calculation methods to obtain the phase transformation and equilibrium relations required for material design and fabrication. The phase transus and relations for the 8Nb-TiAl system show some deviations from the calculated thermodynamic results. The ordered βo phase transforms from the disordered β/α phases at 1200–1400 °C over a large Al concentration range, and this transformation is considered to be an intermediate type between the first- and second-order phase transitions. Moreover, the βo phases are retained at the ambient temperature in the 8Nb-TiAl microstructures. The ωo phase transforms from the highly ordered βo phase, rather than from α2 or βo with a low degree of atom ordering B2 (LOB2) structure, with Al concentration of 32–43 at% at approximately 850 °C. From the experimental detection, the transition of the ωo phase from the βo phase is considered to be a further ordering process
Performance-Based Evaluation of Healing Efficiency on Mechanical Properties of Self-Healing Cementitious Materials Incorporated with PMMA/Epoxy Microcapsule
In this study, based upon the investigation of its effect on workability and the mechanical property of cementitious materials, the Box–Behnken design was adopted to establish models describing self-healing performance on mechanical properties of cementitious materials with polymethylmethacrylate (PMMA)/epoxy microcapsule in terms of healing rate of peak strength (Y1), the recovery rate of peak strength (Y2), the healing rate of Young’s modulus (Y3), the recovery rate of Young’s modulus (Y4), the healing rate of peak strain (Y5), and recovery rate of peak strain (Y6). This was performed under the influence of the four factors, including microcapsule size (X1), microcapsule content (X2), pre-loading (X3), and curing age (X4). The results showed the four factors significantly affect the healing rate and recovery rate of the peak strength, Young’s modulus, and peak strain, except the healing rate on peak strain. Moreover, the interaction between the factors showed some influence as well. The numerically optimised values of X1, X2, X3, and X4 are 203 nm, 5.59%, 43.56%, and 21 days, respectively, and the self-healing cementitious materials with desirable mechanical characteristics (Y1 63.67%, Y2 145.22%, Y3 40.34%, Y4 132.22%, Y5 27.66%, and Y6 133.84%) with the highest desirability of 0.9050 were obtained. Moreover, the porosity of the specimen confirmed the healing performance of PMMA/epoxy microcapsules in cementitious materials