16 research outputs found

    Effect of Alkali Treatment on Structure and Properties of High Amylose Corn Starch Film

    No full text
    Alkali treatment is used for melt extrusion film formation with corn starch, but optimal conditions for this procedure are still unknown. In this study, the changes in properties and structure of high amylose corn starch (70%) films with different concentrations of sodium hydroxide (NaOH), prepared by melting extrusion, were investigated. With increasing sodium hydroxide concentrations, the tensile strength of the high-amylose starch film decreased gradually, while the elongation at break increased. The tensile strength of the high amylose starch (HAS) film with 2% NaOH-treatment was 10.03 MPa and its elongation at break was 40%. A 2% NaOH-treatment promoted the orderly rearrangement of starch molecules and formed an Eh-type crystal structure, which enlarged the spacing of the single helix structure, increased the molecular mobility of the starch, and slowed down the process of recrystallization; a 10% NaOH-treatment oxidized the hydroxyl groups of the high amylose corn starch during extrusion, formed a poly-carbonyl structure, and initiated the degradation and cross-linking of starch molecule chains

    Distribution of Phenolic Acids and Antioxidant Activities of Different Bran Fractions from Three Pigmented Wheat Varieties

    No full text
    Phenolic acid profiles and antioxidant activities of outer bran, coarse bran, and shorts from blue, black, and purple wheat were analyzed. Phenolic acids were mainly in the bound form in pigmented wheat bran fractions. Phenolic acid content decreased in the order of outer bran, coarse bran, and shorts for the three pigmented wheat varieties. HPLC analysis of phenolic extracts demonstrated that the bound form of phenolic acids contained more ferulic, isoferulic, and p-coumaric acids compared to their free counterparts. Among the three pigmented wheat varieties, the bran fractions from blue wheat contained higher bound phenolic acids than the other two pigmented wheat bran fractions, except for purple coarse bran. The blue wheat outer bran had the highest total bound phenolic acid of 3458.71 μg/g while the purple wheat shorts had the lowest of 1730.71 μg/g. The contribution of bound phenolic acids to the total phenolic content and antioxidant activity was significantly higher than that of free phenolic acids. Blue wheat bran fractions had the highest radical scavenging activity against DPPH∙ while those of purple wheat gained the highest ABTS∙+ scavenging activity. High correlations were observed between TPC and radical scavenging capacities for DPPH and ABTS (R2>0.85, P<0.05)

    Effects of Organic Modification of Montmorillonite on the Properties of Hydroxypropyl Di-Starch Phosphate Films Prepared by Extrusion Blowing

    No full text
    The knowledge gained from starch-nanocomposite-film research has not been fully applied commercially because of the lack of appropriate industrial processing techniques for nanofillers and starch films. Three organically modified montmorillonites (OMMTs) were prepared using a semidry kneading method. The effects of the OMMTs on the structures and properties of starch nanocomposite films, prepared by extrusion blowing, were investigated. The X-ray diffraction (XRD) analysis results revealed that the OMMTs with various quaternary ammonium salts possessed differing layer structures and d-space values. The results of the XRD and Fourier-transform infrared spectroscopy (FT-IR) showed that the starch&ndash;OMMT interaction resulted in a structural change, namely the starch&ndash;OMMT films possessed a balanced exfoliated and intercalated nanostructure, while the starch&ndash;MMT film possessed an exfoliated nanostructure with non-intercalated montmorillonite (MMT). The results of the solid-state nuclear magnetic resonance (NMR) analysis suggested that the starch-OMMT nanocomposite possessed comparatively large quantities of single-helix structures and micro-ordered amorphous regions. The starch&ndash;OMMT films exhibited good tensile strength (TS) (maximum of 6.09 MPa) and water barrier properties (minimum of 3.48 &times; 10&minus;10 g&middot;m&middot;m&minus;2&middot;s&minus;1&middot;Pa&minus;1). This study indicates that the addition of OMMTs is a promising strategy to improve the properties of starch films

    High-Throughput Fabrication of Antibacterial Starch/PBAT/AgNPs@SiO<sub>2</sub> Films for Food Packaging

    No full text
    In this current work, antimicrobial films based on starch, poly(butylene adipate-co-terephthalate) (PBAT), and a commercially available AgNPs@SiO2 antibacterial composite particle product were produced by using a melt blending and blowing technique. The effects of AgNPs@SiO2 at various loadings (0, 1, 2, 3, and 4 wt%) on the physicochemical properties and antibacterial activities of starch/PBAT composite films were investigated. AgNPs@SiO2 particles were more compatible with starch than PBAT, resulting in preferential distribution of AgNPs@SiO2 in the starch phase. Infusion of starch/PBAT composite films with AgNPs@SiO2 marginally improved mechanical and water vapor barrier properties, while surface hydrophobicity increased as compared with films without AgNPs@SiO2. The composite films displayed superior antibacterial activities against both Gram-positive (Staphylococcus aureus) and Gram-negative (Escherichia coli) bacteria. The sample loaded with 1 wt% AgNPs@SiO2 (SPA-1) showed nearly 90% inhibition efficiency on the tested microorganisms. Furthermore, a preliminary study on peach and nectarine at 53% RH and 24 °C revealed that SPA-1 film inhibited microbial spoilage and extended the product shelf life as compared with SPA-0 and commercial LDPE packaging materials. The high-throughput production method and strong antibacterial activities of the starch/PBAT/AgNPs@SiO2 composite films make them promising as antimicrobial packaging materials for commercial application

    Cytotoxicity of Deoxynivalenol after Being Exposed to Gaseous Ozone

    No full text
    In this study, deoxynivalenol (DON) in aqueous solution was exposed to gaseous ozone for periods ranging from 0 to 20 min. The degradation efficiency and cytotoxicity of DON were investigated after being treated by ozone. The results showed that DON was rapidly degraded from 10.76 &plusmn; 0.09 mg/L to 0.22 &plusmn; 0.04 mg/L within 15 min (P &lt; 0.05), representing a reduction of 97.95%, and no DON was detected after being exposed to 14.50 mg/L of ozone at a flow rate of 80 mL/min for 20 min. The degradation of DON depended on the ozone exposure time, and followed the first-order kinetic model (R2 = 0.9972). Human hepatic carcinoma (HepG2) and Henrietta Lacks (Hela) cells were used to evaluate the cytotoxicity of DON treated by ozone using the 3-(4,5-Dimethyl-2-thiazolyl)-2,5-diphenyl-2-H-tetrazolium bromide (MTT) assay. The half-maximal inhibitory concentrations (IC50) values of DON on HepG2 and Hela cells were 2.10 and 1.33 mg/L after 48 h of exposure, respectively, and showed a dose-dependent manner. The cell vitalities of HepG2 and Hela cells on DON were both evidently improved after being exposed to ozone for 15 min, and there were no significant differences between the negative control and that treated at 20 min of ozone exposure. Gaseous ozone can potentially be used as a new method to detoxify DON in agricultural products
    corecore