70 research outputs found
Digitale Regelung des Innenrundschleifprozesses Abschlussbericht
Available from TIB Hannover: D.Dt.F.QN1(10,17) / FIZ - Fachinformationszzentrum Karlsruhe / TIB - Technische InformationsbibliothekSIGLEBundesministerium fuer Forschung und Technologie (BMFT), Bonn (Germany)DEGerman
Entwicklung leistungsoptimierter, hybrider Hydraulikkomponenten auf der Basis piezoelektrischer Aktuatoren Abschlussbericht
By substitution of the conventionally used electromagnetic by a piezoelectric actuator the dynamic properties of the servo valve was improved increasing at the same time the accuracy. As a prerequisite for the introduction of the piezovalve an enlargement component for the hydraulic travel has been developed which by means of leckage compensation operates robust with neglectable friction and with high upshift (#approx#50). The voltage induced hysteresis of the piezoactuator is compensated by an integral component in the control unit. In this way positioning accuracies of the valve piston of <1 #mu#m was achieved with a stroke of 0.6-0.75 mm. (WEN)SIGLEAvailable from TIB Hannover: F97B725+a / FIZ - Fachinformationszzentrum Karlsruhe / TIB - Technische InformationsbibliothekBundesministerium fuer Bildung, Wissenschaft, Forschung und Technologie, Bonn (Germany)DEGerman
Featurebasierte Arbeitsplangenerierung fuer Rotationteile Abschlussbericht
SIGLEAvailable from TIB Hannover: F94B878+a / FIZ - Fachinformationszzentrum Karlsruhe / TIB - Technische InformationsbibliothekBundesministerium fuer Forschung und Technologie (BMFT), Bonn (Germany)DEGerman
Optimierung der Brucherkennung mit Cepstrumanalyse beim mehrschneidigen Stirnfraesen Abschlussbericht
The potential of the cepstrum analysis for fracture recognition during multi-blade face milling has been investigated by simulation and experimental studies. The developed strategy for fracture recognition is based on a limit value control of the gamnitude M(#rho#z) in combination with an angle-synchronous data acquisition. Good results were obtained using structure-borne noise sensors. However, under conditions of preferentially aperiodic cutting the reliability of the cepstrum analysis is not sufficientSIGLEAvailable from TIB Hannover: F93B1312+a / FIZ - Fachinformationszzentrum Karlsruhe / TIB - Technische InformationsbibliothekDeutsche Forschungsgemeinschaft (DFG), Bonn (Germany)DEGerman
CBN-Aussenrundschleifen. Aussenrundschleifen mit keramisch gebundenen CBN-Schleifscheiben Abschlussbericht
Available from TIB Hannover: RN 3358(370) / FIZ - Fachinformationszzentrum Karlsruhe / TIB - Technische InformationsbibliothekSIGLEBundesministerium fuer Wirtschaft, Bonn (Germany); Arbeitsgemeinschaft Industrieller Forschungsvereinigungen e.V., Koeln (Germany)DEGerman
Trockenbearbeitung mit Cermetwerkzeugen im Schwerpunkt Oberflaechen- und Schichttechnologien. Teilprojekt C: Untersuchung des Einflusses von Substrat, Randzoneneigenschaften und Beschichtung auf das Verschleissverhalten von Cermetwerkzeugen beim Trockenbohren Abschlussbericht
Available from TIB Hannover: F97B2170+a / FIZ - Fachinformationszzentrum Karlsruhe / TIB - Technische InformationsbibliothekSIGLEBundesministerium fuer Bildung, Wissenschaft, Forschung und Technologie, Bonn (Germany)DEGerman
Automatisierte Nachbearbeitung von polymeren Formteilen Schlussbericht
Available from TIB Hannover: F97B1677 / FIZ - Fachinformationszzentrum Karlsruhe / TIB - Technische InformationsbibliothekSIGLEArbeitsgemeinschaft Industrieller Forschungsvereinigungen e.V., Koeln (Germany)DEGerman
Entwicklung neuartiger Schneidstoffe fuer Hochleistungsverfahren der Zerspantechnik. Teilprojekt: Material- und Bearbeitungseinfluss auf die Kantenguete und das Einsatzverhalten von Feinstkorn-Mischkeramik-Schneidstoffen Schlussbericht
The new developed fine grained mixed ceramic cutting tools demonstrate a significant increase of the tool life time in typical cutting operations like turning of hardened steel. Additionally it is possible to use these new cutting tools in machining operations with discontinuous cut. In manufacturing cutting tools grinding operations are used to create the cutting edges. Especially in grinding fine grained ceramics is it necessary to achieve high precision cutting edges by using fine grained grinding wheels. By developing the in-process sharpening with electro contact discharge it is possible to use fine grained grinding wheel with a high material removal rates. The in-process sharpening processes eliminate the influence of the mechanisms of grinding wheel wear on the grinding process. Therefore with in-process sharpening it is possible to generate high precision cutting edges in economical grinding processes. (orig.)Available from TIB Hannover: F99B26+a / FIZ - Fachinformationszzentrum Karlsruhe / TIB - Technische InformationsbibliothekSIGLEBundesministerium fuer Bildung, Wissenschaft, Forschung und Technologie, Bonn (Germany)DEGerman
Kuehlschmierstoffeinsatz beim Schleifen
Available from TIB Hannover: F98B1036+a / FIZ - Fachinformationszzentrum Karlsruhe / TIB - Technische InformationsbibliothekSIGLEBundesministerium fuer Bildung, Wissenschaft, Forschung und Technologie, Bonn (Germany)DEGerman
Feinstellsystem nach dem Inch-worm-Prinzip Abschlussbericht
SIGLEAvailable from TIB Hannover: F97B1813 / FIZ - Fachinformationszzentrum Karlsruhe / TIB - Technische InformationsbibliothekDeutsche Forschungsgemeinschaft (DFG), Bonn (Germany)DEGerman
- …