A Dual Hollow Core Antiresonant Optical Fiber Coupler Based on a Highly Birefringent Structure-Numerical Design and Analysis

With the growing interest in hollow-core antiresonant fibers (HC-ARF), attributed to the development of their fabrication technology, the appearance of more sophisticated structures is understandable. One of the recently advancing concepts is that of dual hollow-core antiresonant fibers, which have the potential to be used as optical fiber couplers. In the following paper, a design of a dual hollow-core antiresonant fiber (DHC-ARF) acting as a polarization fiber coupler is presented. The structure is based on a highly birefringent hollow-core fiber design, which is proven to be a promising solution for the purpose of propagation of polarized signals. The design of an optimized DHC-ARF with asymmetrical cores is proposed, together with analysis of its essential coupling parameters, such as the extinction ratio, coupling length ratio, and coupling strength. The latter two for the x- and y-polarized signals were ~2 and 1, respectively, while the optical losses were below 0.3 dB/cm in the 1500–1700 nm transmission band

Combining Hollow Core Photonic Crystal Fibers with Multimode, Solid Core Fiber Couplers through Arc Fusion Splicing for the Miniaturization of Nonlinear Spectroscopy Sensing Devices

The presence of fiber optic devices, such as couplers or wavelength division multiplexers, based on hollow-core fibers (HCFs) is still rather uncommon, while such devices can be imagined to greatly increase the potential of HCFs for different applications, such as sensing, nonlinear optics, etc. In this paper, we present a combination of a standard, multimode fiber (MMF) optic coupler with a hollow core photonic bandgap fiber through arc fusion splicing and its application for the purpose of multiphoton spectroscopy. The presented splicing method is of high affordability due to the low cost of arc fusion splicers, and the measured splicing loss (SL) of the HCF-MMF splice is as low as (0.32 ± 0.1) dB, while the splice itself is durable enough to withstand a bending radius (rbend) of 1.8 cm. This resulted in a hybrid between the hollow core photonic bandgap fiber (HCPBF) and MMF coupler, delivering 20 mW of average power and 250-fs short laser pulses to the sample, which was good enough to test the proposed sensor setup in a simple, proof-of-concept multiphoton fluorescence excitation-detection experiment, allowing the successful measurement of the fluorescence emission spectrum of 10−5 M fluorescein solution. In our opinion, the presented results indicate the possibility of creating multi-purpose HCF setups, which would excel in various types of sensing applications

Anti-Resonant Hollow Core Fibers with Modified Shape of the Core for the Better Optical Performance in the Visible Spectral Region—A Numerical Study

In this paper, we present numerical studies of several different structures of anti-resonant, hollow core optical fibers. The cladding of these fibers is based on the Kagomé lattice concept, with some of the core-surrounding lattice cells removed. This modification, by creating additional, glass-free regions around the core, results in a significant improvement of some important optical fiber parameters, such as confinement loss (CL), bending loss (BL), and dispersion parameter (D). According to the conducted simulations (with fused silica glass being the structure’s material), CL were reduced from ~0.36 dB/m to ~0.16 dB/m (at 760 nm wavelength) in case of the structure with removed cells, and did not exceed the value of 1 dB/m across the 700–850 nm wavelength range. Additionally, proposed structure exhibits a remarkably low value of D—from 1.5 to 2.5 ps/(nm × km) at the 700–800 nm wavelength range, while the BL were estimated to be below 0.25 dB/m for bending radius of ~1.5 cm. CL and D were simulated, additionally, for structures made of acrylic glass polymethylmethacrylate, (PMMA), with similarly good results—DPMMA ∊ [2, 4] ps/(nm × km) and CLPMMA ≈ 0.13 dB/m (down from 0.41 dB/m), for the same spectral regions (700–800 nm bandwidth for D, and 760 nm wavelength for CL)

Application of Negative Curvature Hollow-Core Fiber in an Optical Fiber Sensor Setup for Multiphoton Spectroscopy

In this paper, an application of negative curvature hollow core fiber (NCHCF) in an all-fiber, multiphoton fluorescence sensor setup is presented. The dispersion parameter (D) of this fiber does not exceed the value of 5 ps/nm × km across the optical spectrum of (680–750) nm, making it well suited for the purpose of multiphoton excitation of biological fluorophores. Employing 1.5 m of this fiber in a simple, all-fiber sensor setup allows us to perform multiphoton experiments without any dispersion compensation methods. Multiphoton excitation of nicotinamide adenine dinucleotide (NADH) and flavin adenine dinucleotide (FAD) with this fiber shows a 6- and 9-fold increase, respectively, in the total fluorescence signal collected when compared with the commercial solution in the form of a hollow-core photonic band gap fiber (HCPBF). To the author’s best knowledge, this is the first time an NCHCF was used in an optical-fiber sensor setup for multiphoton fluorescence experiments