Surfactant-assisted hydrothemial synthesis of fluoridated hydroxyapatite nanorods

Fluoridated Hydroxyapatite (FHA) nanorods were synthesized using Apricot Tree Gum (ATG) as a novel surfactant and then compared with Ethylenediaminetetraacetic acid disodium salt dihydrate (EDTA) and Sodium Dodecyl Sulfate (SDS) as conventional surfactant agents under hydrothermal condition (70 degrees C and 1 atm). The effects of pH values and various types of surfactants on the formation of the FHA nanorods, crystalline phase, and chemical compositions were investigated using Field Emission Scanning Electron Microscopy (FESEM) equipped by Energy Dispersive X-ray (EDX), X-Ray Diffraction (XRD), and Fourier Transform Infrared Spectroscopy (FTIR). The findings indicated application of the presented ATG as surfactant is able to produce the hexagonal nanorods of FHA along their c-axis direction. Moreover, it is illustrated that diameter and length of nanorods which is obtained by ATG surfactant are bigger than EDTA and SDS. In addition, it is demonstrated that pH values can play a major role on formation of hexagonal FHA nanorods. The increase of pH transformed the shape of synthesized FHA from particles to rods. Ultimately, based on the similarity of synthesized FHA nanorods to the shape, structure, and composition of enamel; it is suggested for its potential to be used for dental applications

Efficiency of nanotube surface-treated dental implants loaded with doxycycline on growth reduction of Porphyromonas gingivalis

© 2017 by Quintessence Publishing Co Inc. Purpose: The prevalence of peri-implant infection in patients with dental implants has been shown to range from 28% to 56%. A nanotube-modified implant surface can deliver antibiotics locally and suppress periodontal pathogenic bacterial growth. The aim of this study was to evaluate the deliverability of antibiotics via a nanotube-modified implant. Materials and Methods: Dental implants with a nanotube surface were fabricated and loaded with doxycycline. Afterward, each dental implant with a nanotube surface was placed into 2-mL tubes, removed from solution, and placed in a fresh solution daily for 28 days. Experimental samples from 1, 2, 4, 16, 24, and 28 days were used for this evaluation. The concentration of doxycycline was measured using spectrophotometric analysis at 273-nm absorbance. The antibacterial effect of doxycycline was evaluated by supplementing Porphyromonas gingivalis (P gingivalis) growth media with the solution collected from the dental implants at the aforementioned time intervals for a period of 48 hours under anaerobic conditions. A bacterial viability assay was used to evaluate P gingivalis growth at 550-nm absorbance. Results: Doxycycline concentration varied from 0.33 to 1.22 μg/mL from day 1 to day 28, respectively. A bacterial viability assay showed the highest P gingivalis growth at day 1 (2 nm) and the lowest at day 4 (0.17 nm), with a gradual reduction from day 1 to day 4 of approximately 87.5%. The subsequent growth pattern was maintained and slightly increased from baseline in approximately 48.3% from day 1 to day 24. The final P gingivalis growth measured at day 28 was 29.4% less than the baseline growth. Conclusion: P gingivalis growth was suppressed in media supplemented with solution collected from dental implants with a nanotube surface loaded with doxycycline during a 28-day time interval

Biophysical evaluation of cells on nanotubular surfaces: The effects of atomic ordering and chemistry

After the implantation of a biomaterial in the body, the first interaction occurs between the cells in contact with the biomaterial surface. Therefore, evaluating the cell-substrate interface is crucial for designing a successful implant. In this study, the interaction of MC3T3 osteoblasts was studied on commercially pure and alloy (Ti6Al4V) Ti surfaces treated with amorphous and crystalline titanium dioxide nanotubes. The results indicated that the presence of nanotubes increased the density of osteoblast cells in comparison to bare surfaces (no nanotubes). More importantly, our finding shows that the chemistry of the substrate affects the cell density rather than the morphology of the cells. A novel approach based on the focused ion beam technique was used to investigate the biophysical cell-substrate interaction. The analysis revealed that portions of the cells migrated inside the crystalline nanotubes. This observation was correlated with the super hydrophilic properties of the crystalline nanotubes. © 2014 Shokuhfar et al

Fluoridated hydroxyapatite nanorods as novel fillers for improving mechanical properties of dental composite: Synthesis and application

© 2015 Elsevier Ltd. Fluoridated hydroxyapatite (FHA) in nanorod morphology and hexagonal cross section were synthesised via hydrothermal process using Apricot Tree Gum (ATG) as a surfactant. The synthesised FHA nanorods were then used as reinforcement in bisphenol A-glycol dimethacrylate (Bis-GMA) as base monomer of composite matrix. The FHA nanorods with different ratios were incorporated in the matrix to examine fluoride ion release and pH changes in the Simulated Body Fluid (SBF) and their mechanical properties. The resin without FHA reinforcement was used as the control sample. The Diametral Tensile Strength (DTS), Flexural Strength (FS), and Flexural Modulus (FM) of the reinforced composite were found to be higher compared to the control sample; the values increased from 34.8 to 45.4. MPa, 76.5 to 99.4. MPa, and 1.7 to 2.5. GPa, respectively. Moreover, findings revealed that the pH is reduced by releasing the fluoride ions into the SBF which can be effective for preventing secondary caries. The most optimum mechanical properties were achieved with 0.2. wt% of FHA reinforcement. The FHA nanocomposite meets the minimum standard requirements for dental applications and compared to other dental composites has advantage of preventing formation of secondary caries due to release of fluoride

Optimization of anodization and annealing condition enhances TiO \u3c inf\u3e 2 nanotubular surface hydrophilicity

In this study anodization and annealing condition are optimized to fabricate nanotubular surface which is able to maintain its hydrophilicity over time - anti-aging surface. Our results indicate that anodization voltage and annealing temperature affect surface ability to maintain its hydrophilicity. Water contact angle measurements show hydrophilicty is sharply decreased after annealing regardless of annealing and anodization conditions. Non-anodized and 20 V anodized samples lose their hydrophilicity after 11 days of aging in air, while 60 V anodized samples are able to maintain their hydrophilicity after this period

A novel investigation of the formation of titanium oxide nanotubes on thermally formed oxide of Ti-6Al-4V

© 2015, Allen Press Inc. All rights reserved. Traditionally, titanium oxide (TiO2) nanotubes (TNTs) are anodized on Ti-6Al-4V alloy (Ti-V) surfaces with native TiO2 (amorphous TiO2); subsequent heat treatment of anodized surfaces has been observed to enhance cellular response. As-is bulk Ti-V, however, is often subjected to heat treatment, such as thermal oxidation (TO), to improve its mechanical properties. Thermal oxidation treatment of Ti-V at temperatures greater than 200°C and 400°C initiates the formation of anatase and rutile TiO2, respectively, which can affect TNT formation. This study aims at understanding the TNT formation mechanism on Ti-V surfaces with TO-formed TiO2 compared with that on as-is Ti-V surfaces with native oxide. Thermal oxidation-formed TiO2 can affect TNT formation and surface wettability because TO-formed TiO2 is expected to be part of the TNT structure. Surface characterization was carried out with field emission scanning electron microscopy, energy dispersive x-ray spectroscopy, water contact angle measurements, and white light interferometry. The TNTs were formed on control and 300°C and 600°C TO-treated Ti-V samples, and significant differences in TNT lengths and surface morphology were observed. No difference in elemental composition was found. Thermal oxidation and TO/anodization treatments produced hydrophilic surfaces, while hydrophobic behavior was observed over time (aging) for all samples. Reduced hydrophobic behavior was observed for TO/anodized samples when compared with control, control/anodized, and TO-treated samples. A method for improved surface wettability and TNT morphology is therefore discussed for possible applications in effective osseointegration of dental and orthopedic implants

Thermally oxidized titania nanotubes enhance the corrosion resistance of Ti6Al4V

© 2015 Elsevier B.V. The negative impact of in vivo corrosion of metallic biomedical implants remains a complex problem in the medical field. We aimed to determine the effects of electrochemical anodization (60 V, 2 h) and thermal oxidation (600 °C) on the corrosive behavior of Ti-6Al-4V, with serum proteins, at physiological temperature. Anodization produced a mixture of anatase and amorphous TiO2 nanopores and nanotubes, while the annealing process yielded an anatase/rutile mixture of TiO2 nanopores and nanotubes. The surface area was analyzed by the Brunauer-Emmett-Teller method and was estimated to be 3 orders of magnitude higher than that of polished control samples. Corrosion resistance was evaluated on the parameters of open circuit potential, corrosion potential, corrosion current density, passivation current density, polarization resistance and equivalent circuit modeling. Samples both anodized and thermally oxidized exhibited shifts of open circuit potential and corrosion potential in the noble direction, indicating a more stable nanoporous/nanotube layer, as well as lower corrosion current densities and passivation current densities than the smooth control. They also showed increased polarization resistance and diffusion limited charge transfer within the bulk oxide layer. The treatment groups studied can be ordered from greatest corrosion resistance to least as Anodized + Thermally Oxidized \u3e Anodized \u3e Smooth \u3e Thermally Oxidized for the conditions investigated. This study concludes that anodized surface has a potential to prevent long term implant failure due to corrosion in a complex in-vivo environment

Transparent TiO \u3c inf\u3e 2 nanotubes on zirconia for biomedical applications

© 2017 The Royal Society of Chemistry. Tissue discoloration in dental implant patients with thin gingival tissue is one of the many causes of dental implants\u27 revision surgery. Therefore, the purpose of this study is to address this issue by developing a surface that has a tooth like bright colored appearance while at the same time enhancing the bone implant integration. A biomimetic surface is fabricated by forming transparent TiO2 nanotubes on zirconia (TTNZ) that can enhance the proliferation and attachment of human mesenchymal stem cells (hMSCs) as compared to roughened ZrO2. This surface treatment was aimed to resolve tissue discoloration and aesthetic appearance problems for dental implant patients, while also enhancing biocompatibility. TiO2 nanotubes (TNTs) were formed using an electrochemical anodization technique in an electrolyte comprised of NH4F, ethylene glycol and water. The presence of TNTs on the ZrO2 substrate was detected by field emission scanning electron microscopy (FESEM). Optical images of longer anodized (20 and 30 min) samples show the white colored appearance characteristic of ZrO2 and FESEM confirmed the presence of TNTs on anodized samples. Surface characteristics of all samples were analyzed using water contact angle analysis, Fourier-transform infrared spectroscopy, white light interferometry and FESEM. Quantitative and qualitative biocompatibility analysis of treated and non-treated ZrO2 surfaces were obtained by performing FESEM, 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl-2H-tetrazolium bromide (MTT) assay and fluorescence microscopy. FESEM revealed well-elongated and well-spread cell morphology on the nanotubular surface as compared to roughened ZrO2. Additionally, MTT assay showed a significantly high cell proliferation for anodized Ti-ZrO2 surface as compared to roughened ZrO2 after 7 days of incubation

Enhancing surface characteristics of Ti-6Al-4V for bio-implants using integrated anodization and thermal oxidation

Modifications of Ti-6Al-4V surface roughness, wettability and composition are increasingly studied to improve cellular viability on biomedical implants involving Ti-6Al-4V. In this study, it is shown that modification of Ti-6Al-4V samples using anodization (for the formation of titania nanotubes) combined with thermal oxidation (TO) results in superior surface characteristics to those of a smooth, rough, anodized-smooth or anodized-rough surface alone. Surface characterization is performed using water contact angle (WCA) measurements, white-light interferometry, Fourier transform infrared spectroscopy (FTIRS), field emission scanning electron microscopy and grazing incidence X-ray diffraction (GIXRD). WCA measurements before TO indicate that anodized-smooth and anodized-rough samples are super-hydrophilic (WCA less than 5°); WCA of non-anodized smooth and rough surfaces are 57 ± 6° and 86 ± 7°, respectively. After TO at 450 °C for 3 hours, all samples become super-hydrophilic; however, three weeks after TO, smooth and rough surfaces become hydrophobic, while anodized-smooth and anodized-rough surfaces remain hydrophilic. FTIRS and GIXRD data show that the TO of anodized and non-anodized smooth samples results in anatase and rutile TiO2, of which anatase is favorable for cellular attachment. Micro-/nano-scale roughness and TO are discussed in the context of enhanced Ti-6Al-4V surface characteristics for improved cellular response. © the Partner Organisations 2014

Fabrication of anti-aging TiO\u3csub\u3e2\u3c/sub\u3e nanotubes on biomedical Ti alloys

The primary objective of this study was to fabricate a TiO2 nanotubular surface, which could maintain hydrophilicity over time (resist aging). In order to achieve non-aging hydrophilic surfaces, anodization and annealing conditions were optimized. This is the first study to show that anodization and annealing condition affect the stability of surface hydrophilicity. Our results indicate that maintenance of hydrophilicity of the obtained TiO2 nanotubes was affected by anodization voltage and annealing temperature. Annealing sharply decreased the water contact angle (WCA) of the assynthesized TiO2 nanotubular surface, which was correlated to improved hydrophilicity. TiO2 nanotubular surfaces are transformed to hydrophilic surfaces after annealing, regardless of annealing and anodization conditions; however, WCA measurements during aging demonstrate that surface hydrophilicity of non-anodized and 20 V anodized samples decreased after only 11 days of aging, while the 60 V anodized samples maintained their hydrophilicity over the same time period. The nanotubes obtained by 60 V anodization followed by 600 uC annealing maintained their hydrophilicity significantly longer than nanotubes which were obtained by 60 V anodization followed by 300°C annealing. © 2014 Hamlekhan et al