An Overview of Own Tracking Wireless Sensors with GSM-GPS Features

Wireless Sensors (WS) mobility and pause time have a major impact directly influencing the energy consumption. Lifetime of a WS Network (WSN) depends directly on the energy consumption, thus, the hardware and software components must be optimized for energy management. This study aims to combine a compact hardware architecture with a smart energy management efficiency in order to increase ratio Lifetime/Energy Consumption, to improve the operating time on a portable tracking system with GPS/GSM/GPRS features and own power. In this paper we present the evolution of own WS tracking architecture with GPS/GSM/GPRS features, basic criterion being the lifetime combined with low power consumption. Concern was focused on hardware and software areas: Large number of physical components led to reconsideration of hardware architecture, while for software, we focused on algorithms able to reduce the number of bits in transmitted data packets, which help to reduce energy consumption. The results and conclusions show that the goal was achieved

A GI Proposal to Display ECG Digital Signals Wirelessly Real-time Transmitted onto a Remote PC

The sensors, as wireless communication system, comply the 7-layer model Open Systems Interconnection (OSI). In this paper, a point-to-point transmission model was used. The ECG signal is transmitted from the Router Sensor (RS) to an end Coordinator Node (CN) plugged-in to the laptop via USB port; RS acquires ECG signal in analogical mode, and is also responsible with sampling, quantization and sending it wirelessly direct to CN. The distance between RS and CN is a single-hop transmission, and does not exceed the range of the XBeeS2Pro transceivers. The communication protocol is ZigBee. Remote viewing of the transmitted signal is performed on a Graphical Interface (GI) written under MATLAB, after the signal has been digitized; the choice of MATLAB was motivated by future developments. Particular aspects will be highlighted, so that the reader to be edified about the results obtained during laboratory experiments. Recording demonstrate that the purpose exposed in title has been reached: Direct link in Real-Time was established, and the digital ECG signal received is reconstituted accurately on MATLAB GI; signal received on laptop is compared with the analog signal displayed on oscilloscope

A GI Proposal to Display ECG Digital Signals Wirelessly Real-time Transmitted onto a Remote PC

The sensors, as wireless communication system, comply the 7-layer model Open Systems Interconnection (OSI). In this paper, a point-to-point transmission model was used. The ECG signal is transmitted from the Router Sensor (RS) to an end Coordinator Node (CN) plugged-in to the laptop via USB port; RS acquires ECG signal in analogical mode, and is also responsible with sampling, quantization and sending it wirelessly direct to CN. The distance between RS and CN is a single-hop transmission, and does not exceed the range of the XBeeS2Pro transceivers. The communication protocol is ZigBee. Remote viewing of the transmitted signal is performed on a Graphical Interface (GI) written under MATLAB, after the signal has been digitized; the choice of MATLAB was motivated by future developments. Particular aspects will be highlighted, so that the reader to be edified about the results obtained during laboratory experiments. Recording demonstrate that the purpose exposed in title has been reached: Direct link in Real-Time was established, and the digital ECG signal received is reconstituted accurately on MATLAB GI; signal received on laptop is compared with the analog signal displayed on oscilloscope