Isolation and Analytical Method Validation for Phytocomponents of Aqueous Leaf Extracts from Vaccinium bracteatum Thunb. in Korea

In this study, major phytochemical compounds of Vaccinium bracteatum Thunb. (VB) aqueous leaf extract were isolated and analyzed using a HPLC-based method, followed by method validation in accordance with the International Conference on Harmonisation (ICH) guidelines for drug development. Five major compounds were isolated in VB extract. Apart from vaccinoside, which had been the only compound isolated in VB extract to date, vanillic acid and protocatechuic acid were isolated for the first time. Isolation of orientin and isoorientin in the VB extract helped validate the reverse-phase analytical method. A new simple and rapid high-performance liquid chromatography (HPLC)-based method was developed for the validation of orientin and isoorientin in VB extract and was determinated according to the ICH guidelines. The analytical method was validated through a Waters Alliance HPLC System containing an e2695 separation module and a 2998 photodiode array (PDA) detector. The VB extract and solutions of orientin and isoorientin were analyzed using a reverse-phase Eclipse XDB-C18 column (4.6 × 250 mm ID, 5 µm, Waters), which was maintained at 30 °C. A mobile phase of methanol and 0.01% formic acid in water was used at a flow rate of 1.0 mL/min to achieve gradient elution. The linearity of the orientin and isoorientin was excellent results (R2 ≥ 0.9999) in the concentration range of 1.0–50.0 μg/mL. Precision values ranged 98.55–101.70% and 98.70–101.18%, respectively. The intra-day and inter-day relative standard deviation (RSD) values of the orientin and isoorientin were all <2.0%. The average recoveries of orientin ranged 98.30–101.57%, whereas isoorientin ranged 97.81–102.14% with RSD values <2.0%. Quantitative analysis found that VB extract contained 2.90 mg/g of orientin and 3.45 mg/g of isoorientin

Microstructure and Mechanical Properties of Gas Tungsten Arc Welded High Manganese Steel Sheet

This study investigated microstructure and mechanical properties of high manganese steel sheet fabricated by gas tungsten arc welding (GTAW). The weld zone showed longitudinal coarse grains due to the coalescence of columnar dendrites grown into the direction of heat source, and the HAZ showed equiaxed coarser grains than the base metal due to the thermal effect of GTAW process. Mn segregation occurred in the inter-dendritic regions of the weld zone and Mn depletion thus occurred in the weld matrix. Although the stacking fault energy is expected to be lowered due to the Mn depletion, no noticeable change in the initial phase and deformation mechanism was found in the weld matrix. Lower hardness and strength were shown in the weld zone than the base metal, which was caused by the coarser grain size. The negative strain rate sensitivity observed in the weld zone and the base metal is considered to have originated from the negative strain rate dependency of twinning nucleation stress