Grain refinement in a AlZnMgCuTi alloy by intensive melt shearing: A multi-step nucleation mechanism

This is a post-print version of the article. Copyright @ 2010 Elsevier B.V.Direct chill (DC) cast ingots of wrought Al alloys conventionally require the deliberate addition of a grain refiner to provide a uniform as-cast microstructure for the optimisation of both mechanical properties and processability. Grain refiner additions have been in widespread industrial use for more than half a century. Intensive melt shearing can provide grain refinement without the need for a specific grain refiner addition for both magnesium and aluminium based alloys. In this paper we present experimental evidence of the grain refinement in an experimental wrought aluminium alloy achieved by intensive melt shearing in the liquid state prior to solidification. The mechanisms for high shear induced grain refinement are correlated with the evolution of oxides in alloys. The oxides present in liquid aluminium alloys, normally as oxide films and clusters, can be effectively dispersed by intensive shearing and then provide effective sites for the heterogeneous nucleation of Al3Ti phase. As a result, Al3Ti particles with a narrow size distribution and hence improved efficiency as active nucleation sites of alpha-aluminium grains are responsible for the achieved significant grain refinement. This is termed a multi-step nucleation mechanism.Funding was obtained from the EPRSC

Anomalous Diffusion in Infinite Horizon Billiards

We consider the long time dependence for the moments of displacement < |r|^q > of infinite horizon billiards, given a bounded initial distribution of particles. For a variety of billiard models we find ~ t^g(q) (up to factors of log t). The time exponent, g(q), is piecewise linear and equal to q/2 for q2. We discuss the lack of dependence of this result on the initial distribution of particles and resolve apparent discrepancies between this time dependence and a prior result. The lack of dependence on initial distribution follows from a remarkable scaling result that we obtain for the time evolution of the distribution function of the angle of a particle's velocity vector.Comment: 11 pages, 7 figures Submitted to Physical Review

Hybrid electrical energy generation from hydropower, solar photovoltaic and hydrogen

The global concern to reduce greenhouse gas emissions and increase the use of renewable sources has led Brazil to stand out as a promising nation in this context, with a large portion of its energy capacity coming from renewable sources. However, renewable sources have the disadvantage of intermittency and seasonality, which has prompted the search for solutions to these challenges. This study assesses the feasibility of integrating hydro and solar power with a Hydrogen-based Electrical Energy Storage System (H2EESS) at the Serra da Mesa hydroelectric Brazilian power plant. Hydrogen would be produced through water electrolysis, taking advantage of the available excess renewable energy, and subsequently converted back into electricity through fuel cells. The integration of hydro and solar power with H2EESS resulted in an increase of 11.10 % in the energy produced compared to conventional hydroelectric generation, with 36.06 % of this increase coming from H2EESS. Additionally, there was a 9.71 % increase in the utilization of substation capacity. These results highlight the feasibility and benefits of integrating hydro and solar power with H2EESS. This approach allows for maximizing renewable energy generation, reducing greenhouse gas emissions, and better utilizing available resources without the need for significant infrastructure investments

Dimensionality of spin modulations in 1/8-doped lanthanum cuprates from the perspective of NQR and muSR experiments

We investigate the dimensionality of inhomogeneous spin modulation patterns in the cuprate family of high-temperature superconductors with particular focus on 1/8-doped lanthanum cuprates. We compare one-dimensional stripe modulation pattern with two-dimensional checkerboard of spin vortices in the context of nuclear quadrupole resonance(NQR) and muon spin rotation(muSR) experiments. In addition, we also consider the third pattern, a two-dimensional superposition of spin spirals. Overall, we have found that none of the above patterns leads to a consistent interpretation of the two types of experiments considered. This, in particular, implies that the spin vortex checkerboard cannot be ruled out on the basis of available NQR/muSR experimental results.Comment: 6 pages, 2 figure

Systematic Cu-63 NQR studies of the stripe phase in La(1.6-x)Nd(0.4)Sr(x)CuO(4) for 0.07 <= x <= 0.25

We demonstrate that the integrated intensity of Cu-63 nuclear quadrupole resonance (NQR) in La(1.6-x)Nd(0.4)Sr(x)CuO(4) decreases dramatically below the charge-stripe ordering temperature T(charge). Comparison with neutron and X-ray scattering indicates that the wipeout fraction F(T) (i.e. the missing fraction of the integrated intensity of the NQR signal) represents the charge-stripe order parameter. The systematic study reveals bulk charge-stripe order throughout the superconducting region 0.07 <= x <= 0.25. As a function of the reduced temperature t = T/T(charge), the temperature dependence of F(t) is sharpest for the hole concentration x=1/8, indicating that x=1/8 is the optimum concentration for stripe formation.Comment: 10 pages of text and captions, 11 figures in postscript. Final version, with new data in Fig.

High speed synchrotron X-ray imaging studies of the ultrasound shockwave and enhanced flow during metal solidification processes

The highly dynamic behaviour of ultrasonic bubble implosion in liquid metal, the multiphase liquid metal flow containing bubbles and particles, and the interaction between ultrasonic waves and semisolid phases during solidification of metal were studied in situ using the complementary ultrafast and high speed synchrotron X-ray imaging facilities housed respectively at the Advanced Photon Source, Argonne National Laboratory, US, and Diamond Light Source, UK. Real-time ultrafast X-ray imaging of 135,780 frames per second (fps) revealed that ultrasonic bubble implosion in a liquid Bi-8 wt. %Zn alloy can occur in a single wave period (30 kHz), and the effective region affected by the shockwave at implosion was 3.5 times the original bubble diameter. Furthermore, ultrasound bubbles in liquid metal move faster than the primary particles, and the velocity of bubbles is 70 ~ 100% higher than that of the primary particles present in the same locations close to the sonotrode. Ultrasound waves can very effectively create a strong swirling flow in a semisolid melt in less than one second. The energetic flow can detach solid particles from the liquid-solid interface and redistribute them back into the bulk liquid very effectively

Hyperbolic chaos in self-oscillating systems based on mechanical triple linkage: Testing absence of tangencies of stable and unstable manifolds for phase trajectories

Dynamical equations are formulated and a numerical study is provided for self-oscillatory model systems based on the triple linkage hinge mechanism of Thurston -- Weeks -- Hunt -- MacKay. We consider systems with holonomic mechanical constraint of three rotators as well as systems, where three rotators interact by potential forces. We present and discuss some quantitative characteristics of the chaotic regimes (Lyapunov exponents, power spectrum). Chaotic dynamics of the models we consider are associated with hyperbolic attractors, at least, at relatively small supercriticality of the self-oscillating modes; that follows from numerical analysis of the distribution for angles of intersection of stable and unstable manifolds of phase trajectories on the attractors. In systems based on rotators with interacting potential the hyperbolicity is violated starting from a certain level of excitation.Comment: 30 pages, 18 figure

Cooling down the world oceans and the earth by enhancing the North Atlantic Ocean current

The world is going through intensive changes due to global warming. It is well known that the reduction in ice cover in the Arctic Ocean further contributes to increasing the atmospheric Arctic temperature due to the reduction of the albedo effect and increase in heat absorbed by the ocean’s surface. The Arctic ice cover also works like an insulation sheet, keeping the heat in the ocean from dissipating into the cold Arctic atmosphere. Increasing the salinity of the Arctic Ocean surface would allow the warmer and less salty North Atlantic Ocean current to flow on the surface of the Arctic Ocean considerably increasing the temperature of the Arctic atmosphere and release the ocean heat trapped under the ice. This paper argues that if the North Atlantic Ocean current could maintain the Arctic Ocean ice-free during the winter, the longwave radiation heat loss into space would be larger than the increase in heat absorption due to the albedo effect. This paper presents details of the fundamentals of the Arctic Ocean circulation and presents three possible approaches for increasing the salinity of the surface water of the Arctic Ocean. It then discusses that increasing the salinity of the Arctic Ocean would warm the atmosphere of the Arctic region, but cool down the oceans and possibly the Earth. However, it might take thousands of years for the effects of cooling the oceans to cool the global average atmospheric temperature

Investigation of a Pt containing washcoat on SiC foam for hydrogen combustion applications

A commercial Pt based washcoat, used for catalytic methane combustion, was studied supported on a commercial SiC foam as catalytic material (Pt/SiC) for catalytic hydrogen combustion (CHC). Structural and chemical characterization was performed using Electron Microscopy, X-Ray Diffraction (XRD) and X-Ray Photoelectron Spectroscopy (XPS). The reaction was monitored following water concentration by Fourier Transform Infrared spectra (FTIR). The FTIR method was compared with H2 detection by Gas Cromatography (GC) and has shown to be adequate to study the kinetics of the CHC reaction in steady state under our experimental conditions (very lean 1% (v/v) H2/air mixtures). The catalyst is composed of 5–20 nm disperse Pt nanoparticles decorating a mixture of high surface area Al2O3 and small amounts of ceria supported on the SiC foam which also contains alumina as binder. The Pt/SiC catalytic material has demonstrated to be active enough to start up the reaction in a few seconds at room temperature. The material has been able to convert at least 18.5 Lhydrogen min−1 gPt−1 at room temperature in conditions of excess of catalyst. The Pt/SiC material was studied after use using XPS and no significant changes on Pt oxidation states were found. The material was characterized from a kinetic point of view. From the conversion-temperature plot a T50 (temperature for 50% conversion) of 34 °C was obtained. Activation energy measured in our conditions was 35 ± 1 kJ mol−1.Peer reviewe

The Intentional Use of Service Recovery Strategies to Influence Consumer Emotion, Cognition and Behaviour

Service recovery strategies have been identified as a critical factor in the success of. service organizations. This study develops a conceptual frame work to investigate how specific service recovery strategies influence the emotional, cognitive and negative behavioural responses of . consumers., as well as how emotion and cognition influence negative behavior. Understanding the impact of specific service recovery strategies will allow service providers' to more deliberately and intentionally engage in strategies that result in positive organizational outcomes. This study was conducted using a 2 x 2 between-subjects quasi-experimental design. The results suggest that service recovery has a significant impact on emotion, cognition and negative behavior. Similarly, satisfaction, negative emotion and positive emotion all influence negative behavior but distributive justice has no effect