Simultaneous spectrophotometric determination of phosphate and silicate ions in river water by using ion-exclusion chromatographic separation and post-column derivatization

The simultaneous spectrophotometric determination of phosphate and silicate ions in river water was examined by using ion-exclusion chromatography and post-column derivatization. Phosphate and silicate ions were separated by the ion-exclusion column packed with a polymethacrylate-based weakly acidic cation-exchange resin in the H+-form (TSKgel Super IC-A/C) by using ultra pure water as an eluent. After the postcolumn derivatization with molybdate and ascorbic acid, so-called molybdenum-blue, both ions were determined simultaneously by spectrophotometry. The effects of sulfuric acid, sodium molybdate and ascorbic acid concentrations and reaction coil length, which have relation to form the reduced complexes of molybdate and ions, on the detector response for phosphate and silicate ions were investigated. Under the optimized conditions (color-forming reactant, 50 mM sulfuric acid-10 mM sodium molybdate; reducing agent, 50 mM ascorbic acid; reaction coil length, 6 m), the calibration curves of phosphate and silicate ions were linear in the range of 50 - 2,000 μg L-1 as P and 250 - 10,000 μg L-1 as Si. This method was successfully applied to water quality monitoring of Kurose-river watershed and it suggested that the effluent from a biological sewage treatment plant was significant source of phosphate ion in Kurose-river water

Ion-exclusion/cation-exchange Chromatography with Dual Detection of the Conductivity and Spectrophotometry for the Simultaneous Determination of Common Inorganic Anionic Species and Cations in River and Wastewater

Simultaneous determinations of common inorganic anionic species (SO_4^, Cl^−, NO_3^−, phosphate and silicate) and cations (Na^+, NH_4^+, K^+, Mg^ and Ca2+) were conducted using an ion-chromatography system with dual detection of conductivity and spectrophotometry in tandem. The separation of ionic species on a weakly acidic cation-exchange resin was accomplished using a mixture of 100 mM ascorbic acid and 4 mM 18-crown-6 as an acidic eluent (pH 2.6), after which the ions were detected using a conductivity detector. Subsequently, phosphate and silicate were analyzed based on derivatization with molybdate and spectrophotometry at 700 nm. The detection limits at S/N = 3 ranged from 0.11 to 2.9 μM for analyte ionic species. This method was applied to practical river water and wastewater with acceptable criteria for the anion-cation balance and comparisons of the measured and calculated electrical conductivity, demonstrating the usefulness of the present method for water quality monitoring

Use of a biomimetic chromatographic stationary phase for study of the interactions occurring between inorganic anions and phosphatidylcholine membranes.

A liquid chromatographic method for the study of ion-membrane interactions is reported. A phosphatidylcholine biomimetic stationary phase was established by loading dimyristoylphosphatidylcholine (DMPC) onto a reversed-phase octadecylsilica packed column. This column was then used to study the interaction of some inorganic anions with the stationary phase by UV and conductivity detection. Ten inorganic anions were selected as model ions and were analyzed with the proposed chromatographic system. Anion-DMPC interactions of differing magnitudes were observed for all of the model anions. Perchlorate-DMPC interactions were strongest, followed by thiocyanate-DMPC, iodide-DMPC, chlorate-DMPC, nitrate-DMPC, bromide-DMPC, chloride-DMPC, fluoride-DMPC, and then sulfate-DMPC. Cations in the eluent, especially H(+) ions and divalent cations such as Ca(2+), showed strong effects on anion-DMPC interactions. The chromatographic data suggest that DMPC interacts with both the anions and the cations. Anion-DMPC interactions were dependent on the surface potential of the stationary phase: at low surface potentials anion-DMPC interactions were predominantly solvation dependent in nature whereas at more positive surface potentials anion-DMPC interactions were predominantly electrostatic in nature. Cation-DMPC interactions served to raise the surface potential, causing the anion-DMPC interactions to vary from solvation dependent to electrostatic. The chromatographic data were used to provide quantitative estimates of the enthalpies of the anion-DMPC interactions