In-Situ Nuclear Magnetic Resonance Investigation of Strain, Temperature, and Strain-Rate Variations of Deformation-Induced Vacancy Concentration in Aluminum

Critical strain to serrated flow in solid solution alloys exhibiting dynamic strain aging (DSA) or Portevin–LeChatelier effect is due to the strain-induced vacancy production. Nuclear magnetic resonance (NMR) techniques can be used to monitor in situ the dynamical behavior of point and line defects in materials during deformation, and these techniques are nondestructive and noninvasive. The new CUT-sequence pulse method allowed an accurate evaluation of the strain-enhanced vacancy diffusion and, thus, the excess vacancy concentration during deformation as a function of strain, strain rate, and temperature. Due to skin effect problems in metals at high frequencies, thin foils of Al were used and experimental results correlated with models based on vacancy production through mechanical work (vs thermal jogs), while in situ annealing of excess vacancies is noted at high temperatures. These correlations made it feasible to obtain explicit dependencies of the strain-induced vacancy concentration on test variables such as the strain, strain rate, and temperature. These studies clearly reveal the power and utility of these NMR techniques in the determination of deformation-induced vacancies in situ in a noninvasive fashion.

Design and Implementation of POSIT Based Adder and Multiplier in Verilog HDL

Due to recent developments, the POSIT number system, winch has been planned as a successor for numbers that are expressed in IEEE floating-point, which are in the focus of advances in arithmetic. Although this format claims to deliver more precise outcomes with the same bit width as ordinary floating point, the duration of the operation fluctuation during posit field identification poses a hardware design problem. The POSIT-based MAC Unit is created using Verilog HDL in this study, and the designed architecture is evaluated for good operation before being implemented on an FPGA using Xilinx Vivado

Performance Analysis of Spectrum Sharing Radar in Multipath Environment

Radar based sensing and communication systems sharing a common spectrum have become a potential research problem in recent years due to spectrum scarcity. The spectrum sharing radar (SSR) is a new technology that uses the total available bandwidth (BW) for both radar based sensing and communication. Unlike traditional radar, the SSR divides the total available BW into radar-only and mixed-use bands. In a radar-only band, only radar sensor signals can be transmitted and received. In contrast, radar and communication signals can both be transmitted and received in the mixed-use band. Taking such BW sharing into account, this paper investigates the performance of SSR in an information-theoretic sense. To evaluate performance, mutual information (MI), spectral efficiency (SE) and capacity (C) metrics are used. Initially, this paper considered a clean environment (no multipath) in order to evaluate performance metrics in the mixed-use band with and without successive interference cancellation. Following that, this paper addresses the performance of BW allocation by allocating low to high BW in mixed-band. Furthermore, the performance metrics are extended to account for the multipath environment, and the same analogy as in a clean environment is used. In addition, the MI and SE of traditional radar system is taken into account when comparing the performance of SSR with and without the use of the SIC. Finally, MI and capacity results show that using the SIC scheme in a mixed-use band yields performance comparable to traditional radar and communication system. In terms of SE, the SSR with SIC scheme outperforms traditional radar and communication system

Electrical and Magnetic Properties of Nanocrystalline BiFeO<SUB>3</SUB> Prepared by High Energy Ball Milling and Microwave Sintering

A new synthesis route with high energy ball milling and microwave sintering is used to obtain nanocrystalline BiFeO3 with improved dielectric and magnetic properties. Electrical and magnetic properties are compared with a conventionally sintered microcrystalline BiFeO3. It is found that the dielectric constant is increased more than one order of magnitude, electrical resistivity by six orders of magnitude and remnant polarization value is increased by 4-5 times for nanocrystalline BiFeO3 in comparison to conventionally sintered microcrystalline BiFeO3. Nanocrystalline BiFeO3 is seen to have ferromagnetic behavior whereas microcrystalline BiFeO3 is known to be antiferromagnetic

A note on the longevity of the mountain brushtail possum, Trichosurus caninus in the mountain ash forests of the central highlands of Victoria

Volume: 108Start Page: 4End Page: