264 research outputs found
Excitation of surface plasmons at a SiO2/Ag interface by silicon quantum dots: Experiment and theory
The excitation of surface plasmons (SPs) by optically excited silicon quantum dots (QDs) located near a Ag interface is studied both experimentally and theoretically for different QD-interface separations. The Si QDs are formed in the near-surface region of an SiO2 substrate by Si ion implantation and thermal annealing. Photoluminescence decay-rate distributions, as derived from an inverse Laplace transform of the measured decay trace, are determined for samples with and without a Ag cover layer. For the smallest, investigated Si-QDs-to-interface distance of 44 nm the average decay rate at lambda=750 nm is enhanced by 80% due to the proximity of the Ag-glass interface, with respect to an air-glass interface. Calculations based on a classical dipole oscillator model show that the observed decay rate enhancement is mainly due to the excitation of surface plasmons that are on the SiO2/Ag interface. By comparing the model calculations to the experimental data, it is determined that Si QDs have a very high internal emission quantum efficiency of (77Ā±17)%. At this distance they can excite surface plasmons at a rate of (1.1Ā±0.2)Ć104 sĀæ1. From the model it is also predicted that by using thin metal films the excitation of surface plasmons by Si QDs can be further enhanced. Si QDs are found to preferentially excite symmetric thin-film surface plasmons
Phase mapping of ultrashort pulses in bimodal photonic structures: A window on local group velocity dispersion
The amplitude and phase evolution of ultrashort pulses in a bimodal waveguide structure has been studied with a time-resolved photon scanning tunneling microscope (PSTM). When waveguide modes overlap in time intriguing phase patterns are observed. Phase singularities, arising from interference between different modes, are normally expected at equidistant intervals determined by the difference in effective index for the two modes. However, in the pulsed experiments the distance between individual singularities is found to change not only within one measurement frame, but even depends strongly on the reference time. To understand this observation it is necessary to take into account that the actual pulses generating the interference signal change shape upon propagation through a dispersive medium. This implies that the spatial distribution of phase singularities contains direct information on local dispersion characteristics. At the same time also the mode profiles, wave vectors, pulse lengths, and group velocities of all excited modes in the waveguide are directly measured. The combination of these parameters with an analytical model for the time-resolved PSTM measurements shows that the unique spatial phase information indeed gives a direct measure for the group velocity dispersion of individual modes. As a result interesting and useful effects, such as pulse compression, pulse spreading, and pulse reshaping become accessible in a local measuremen
Pulse tracking in complex photonic structures
Time-resolved near-field microscopy allows the propagation of ultrafast pulses to be visualized en route while they travel through complex photonic structures. These measurements enable the unambiguous determination of both local phase and group velocities. We illustrate this powerful technique by tracking an ultrashort wavepacket as it completes several round trips in a ring resonator
Continuous phase stabilization and active interferometer control using two modes
We present a computer-based active interferometer stabilization method that
can be set to an arbitrary phase difference and does not rely on modulation of
the interfering beams. The scheme utilizes two orthogonal modes propagating
through the interferometer with a constant phase difference between them to
extract a common phase and generate a linear feedback signal. Switching times
of 50ms over a range of 0 to 6 pi radians at 632.8nm are experimentally
demonstrated. The phase can be stabilized up to several days to within 3
degrees.Comment: 3 pages, 2 figure
Shedding Light on Capillary-Based Backscattering Interferometry
Capillary-based backscattering interferometry has been used extensively as a tool to measure molecular binding via interferometric refractive index sensing. Previous studies have analysed the fringe patterns created in the backscatter direction. However, polarisation effects, spatial chirps in the fringe pattern and the practical impact of various approximations, and assumptions in existing models are yet to be fully explored. Here, two independent ray tracing approaches are applied, analysed, contrasted, compared to experimental data, and improved upon by introducing explicit polarisation dependence. In doing so, the significance of the inner diameter, outer diameter, and material of the capillary to the resulting fringe pattern and subsequent analysis are elucidated for the first time. The inner diameter is shown to dictate the fringe pattern seen, and therefore, the effectiveness of any dechirping algorithm, demonstrating that current dechirping methods are only valid for a subset of capillary dimensions. Potential improvements are suggested in order to guide further research, increase sensitivity, and promote wider applicability
Pulse tracked through waveguide
Conventionally, researchers study pulse propagation by coupling pulses into a medium and deducing what goes on inside from the radiation that is transmitted or reflected. Now a team from the University of Twente in Enchede, the Netherlands, has found a way to track the group and phase velocities of a femtosecond laser pulse inside a photonic structure using a heterodyne-detection, phase-sensitive photon scanning tunneling microscope.\ud
\ud
The researchers used a frequency-doubled, Ti:sapphire-pumped optical parametric oscillator to produce a 300-fs-long pulse inside a silicon nitride planar-channel waveguide. They captured snapshots of the pulse's position while moving the microscope's reference point along the medium with it. They then compiled the snapshots to form a full picture of what was happening to the pulse in the waveguide.\ud
\ud
The team expects this methodology to lend more insight into the dynamic behaviors of photonic crystals and integrated optical circuits
An Analysis of Semicircular Channel Backscattering Interferometry Through Ray Tracing Simulations
Recent backscattering interferometry studies utilise a single channel microfluidic system, typically approximately semicircular in cross-section. Here, we present a complete ray tracing model for on-chip backscattering interferometry with a semicircular cross-section, including the dependence upon polarisation and angle of incidence. The full model is validated and utilised to calculate the expected fringe patterns and sensitivities observed under both normal and oblique angles of incidence. Comparison with experimental data from approximately semicircular channels using the parameters stated shows that they cannot be explained using a semicircular geometry. The disagreement does not impact on the validity of the experimental data, but highlights that the optical mechanisms behind the various modalities of backscattering interferometry would benefit from clarification. From the analysis presented here, we conclude that for reasons of ease of analysis, data quality, and sensitivity for a given radius, capillary-based backscattering interferometry affords numerous benefits over on-chip backscattering interferometry
Optimization problems in periodic and disordered dielectrical structures
Summary form only given. As demands on the speed of integrated optical devices increase, ever-shorter light pulses will be used in those devices. As the development of the photonic devices advances, so to will the need to monitor the behavior of short pulses as they propagate through such devices. However, peeking inside a photonic structure is far from trivial as conventional microscopy is limited by the diffraction limit. Recently, we demonstrated a non-invasive technique based on an optical photon scanning tunneling microscope (PSTM) that can be used to "visualize" pulses as they propagate through an optical device with both temporal and spatial resolution. With this technique we have now been able to observe the time-resolved motion of a short optical wave packet
- ā¦