Humidification - Dehumidification Desalination Process Using Waste Heat from A Gas Turbine By

This paper presents a hutnidification-dehumidification desalination process using waste heat from a gas turbine power plant. In this process, the air is used as the operating fluid instead of water. The process has many advantages over many desalination processes which use waste heat from gas turbines. The amount of fresh water produced and the mass of air-gas mixture leaving the desalination plant were found to decrease with decreasing gas turbine load and with increasing mixing temperature. The air-gas mixture can be safely used in space air conditioning. The specific power consumption of the proposed process was found to be less than that of either single or dual Multi-Stage Flash (MSF) plants. It is greater however, than that of all types of Reverse Osmosis (RO) plants. The specific capital investment of the process is found to be less than that for any other desalination process considered. The ratio of water production to power generation in the present process is nevertheless very small

Interferometric investigation of the opto-mechanical and structural properties of iPP/TiO2 nanocomposite fibers

Fibers that missing specific features and functionalities could be innovated and functionalised via nano additives, in particular metal oxides. Titanium oxide (TiO2) nanoparticles have been added to isotactic polypropylene (iPP) to form iPP/TiO2 nanocomposite fibers. Three samples of iPP/TiO2 fibers were extruded at three extrusion speeds 25, 50, and 78 m/min were considered in this study. Mach–Zehnder interferometer was used to assess the changes in the opto‐mechanical and geometrical parameters of iPP/TiO2 nanocomposite fibers along the fiber axis. The mechanical drawing device along with Mach–Zehnder interferometer was utilized to stretch the filaments to different draw ratios. The effect of mechanical cold drawing and extrusion speed on the optical and physical characteristics of iPP/TiO2 nanocomposite fibers were determined along the fiber axis. The optical and physical variation along the nanocomposite samples were characterized by measuring their refractive indices, birefringence, refractive index profile along the fiber axis. The diffraction of He–Ne laser beam was used to define the variation of the fiber diameter along the fiber axis through their cross‐sectional area and shape. A sample of uniform diameter from neat iPP fibers was used as reference material for studying the variation of the iPP/TiO2 fiber diameter along the fiber axis. As result, the iPP/TiO2 nanocomposite fibers exhibited nonuniform diameters. The dispersion of TiO2 particles in nanocomposite fibers influences the properties' consistency along and across the fiber

Entropy Generation Analysis of Desalination Technologies

Increasing global demand for fresh water is driving the development and implementation of a wide variety of seawater desalination technologies. Entropy generation analysis, and specifically, Second Law efficiency, is an important tool for illustrating the influence of irreversibilities within a system on the required energy input. When defining Second Law efficiency, the useful exergy output of the system must be properly defined. For desalination systems, this is the minimum least work of separation required to extract a unit of water from a feed stream of a given salinity. In order to evaluate the Second Law efficiency, entropy generation mechanisms present in a wide range of desalination processes are analyzed. In particular, entropy generated in the run down to equilibrium of discharge streams must be considered. Physical models are applied to estimate the magnitude of entropy generation by component and individual processes. These formulations are applied to calculate the total entropy generation in several desalination systems including multiple effect distillation, multistage flash, membrane distillation, mechanical vapor compression, reverse osmosis, and humidification-dehumidification. Within each technology, the relative importance of each source of entropy generation is discussed in order to determine which should be the target of entropy generation minimization. As given here, the correct application of Second Law efficiency shows which systems operate closest to the reversible limit and helps to indicate which systems have the greatest potential for improvement.King Fahd University of Petroleum and MineralsCenter for Clean Water and Clean Energy at MI

Stabilising and trimming 3D woven fabrics for composite preforming applications

The work presented here focusses on the developments in the stabilising and trimming of 3D woven preforms. Dry fibre preforms are notoriously difficult to trim; once a fabric is cut, it loses its edge stability and consequently the fabric frays. The result is an unstable fabric which can easily be displaced/ distorted prior to composite manufacturing. In this work, three stabilisation and three trimming techniques were investigated. Of the stabilisation techniques these included powder binder, thermoplastic binder yarn (activated to give fabric stabilization); and polyester stitching. The stabilised fabrics were trimmed to near-net-shape using different trimming techniques. The trimming techniques investigated were laser, clicker press and ultrasonic knife. Each stabilisation method was trialled with each trimming method to assess the most suitable combination. The assessment of quality and suitability was made by observing the level of stabilisation, amount of fraying fibres, quality of the cut, ease of application and repeatability of the process. This paper details the assessments made for each combination alongside practical application conclusions. The key findings were; cutting by means of a laser is capable of sealing the fabric edges, producing high edge quality. Stitching as a method of stabilising is not sufficient in preventing fibres from moving during the cutting process, hence producing an unclean cut

Mechanism of Nickel and Chromium-Induced Immunotoxicity and Oxidative Stress: A Comparative Study

Abstract Introduction: Chromium (Cr) and Nickel (Ni) are examples of commonly used industrial substances with negative long time exposure on human health. One mechanism whereby metals can alter health is through modulation of immune homeostasis. They are capable of producing oxidative stress and it is possible that this oxidative stress contributes to the carcinogenic response of these metals

Wetting and evaporation of salt-water nanodroplets: A molecular dynamics investigation

We employ molecular dynamics simulations to study the wetting and evaporation of salt-water nanodroplets on platinum surfaces. Our results show that the contact angle of the droplets increases with the salt concentration. To verify this, a second simulation system of a thin salt-water film on a platinum surface is used to calculate the various surface tensions. We find that both the solid-liquid and liquid-vapor surface tensions increase with salt concentration and as a result these cause an increase in the contact angle. However, the evaporation rate of salt-water droplets decreases as the salt concentration increases, due to the hydration of salt ions. When the water molecules have all evaporated from the droplet, two forms of salt crystals are deposited, clump and ringlike, depending on the solid-liquid interaction strength and the evaporation rate. To form salt crystals in a ring, it is crucial that there is a pinned stage in the evaporation process, during which salt ions can move from the center to the rim of the droplets. With a stronger solid-liquid interaction strength, a slower evaporation rate, and a higher salt concentration, a complete salt crystal ring can be deposited on the surface

Food Supply and Seawater pCO2 Impact Calcification and Internal Shell Dissolution in the Blue Mussel Mytilus edulis

Progressive ocean acidification due to anthropogenic CO2 emissions will alter marine ecosytem processes. Calcifying organisms might be particularly vulnerable to these alterations in the speciation of the marine carbonate system. While previous research efforts have mainly focused on external dissolution of shells in seawater under saturated with respect to calcium carbonate, the internal shell interface might be more vulnerable to acidification. In the case of the blue mussel Mytilus edulis, high body fluid pCO2 causes low pH and low carbonate concentrations in the extrapallial fluid, which is in direct contact with the inner shell surface. In order to test whether elevated seawater pCO2 impacts calcification and inner shell surface integrity we exposed Baltic M. edulis to four different seawater pCO2 (39, 142, 240, 405 Pa) and two food algae (310–350 cells mL−1 vs. 1600–2000 cells mL−1) concentrations for a period of seven weeks during winter (5°C). We found that low food algae concentrations and high pCO2 values each significantly decreased shell length growth. Internal shell surface corrosion of nacreous ( = aragonite) layers was documented via stereomicroscopy and SEM at the two highest pCO2 treatments in the high food group, while it was found in all treatments in the low food group. Both factors, food and pCO2, significantly influenced the magnitude of inner shell surface dissolution. Our findings illustrate for the first time that integrity of inner shell surfaces is tightly coupled to the animals' energy budget under conditions of CO2 stress. It is likely that under food limited conditions, energy is allocated to more vital processes (e.g. somatic mass maintenance) instead of shell conservation. It is evident from our results that mussels exert significant biological control over the structural integrity of their inner shell surfaces

Anaerobic digestion and gasification of seaweed

The potential of algal biomass as a source of liquid and gaseous biofuels is a highly topical theme, with over 70 years of sometimes intensive research and considerable financial investment. A wide range of unit operations can be combined to produce algal biofuel, but as yet there is no successful commercial system producing such biofuel. This suggests that there are major technical and engineering difficulties to be resolved before economically viable algal biofuel production can be achieved. Both gasification and anaerobic digestion have been suggested as promising methods for exploiting bioenergy from biomass, and two major projects have been funded in the UK on the gasification and anaerobic digestion of seaweed, MacroBioCrude and SeaGas. This chapter discusses the use of gasification and anaerobic digestion of seaweed for the production of biofuel