The influence of fibre length, diameter and concentration on the strength and strain to failure of glass fibre-reinforced polyamide 6,6

Results of an investigation of the mechanical performance of injection moulded long glass fibre-reinforced polyamide 6,6 composites are presented. The glass fibre content in these composites was varied over the range 10-50% by weight using fibres with average diameters of 10, 14, and 17 μm. Mechanical testing and analysis of the apparent interfacial shear strength was carried out at 23 and 150 °C on dry-as-moulded and boiling water conditioned samples. The results from these composites are compared with standard extrusion compounded short glass fibre materials. The influence of fibre diameter and concentration on the residual fibre length, fibre orientation distribution and composite strength and elongation to failure is presented and discussed in comparison to the predictions of some of the available micromechanical models

A critical assessment of the JULES land surface model hydrology for humid tropical environments

Global land surface models (LSMs) such as the Joint UK Land Environment Simulator (JULES) are originally developed to provide surface boundary conditions for climate models. They are increasingly used for hydrological simulation, for instance to simulate the impacts of land use changes and other perturbations on the water cycle. This study investigates how well such models represent the major hydrological fluxes at the relevant spatial and temporal scales-an important question for reliable model applications in poorly understood, data-scarce environments. The JULES-LSM is implemented in a 360 000 km2 humid tropical mountain basin of the Peruvian Andes-Amazon at 12-km grid resolution, forced with daily satellite and climate reanalysis data. The simulations are evaluated using conventional discharge-based evaluation methods, and by further comparing the magnitude and internal variability of the basin surface fluxes such as evapotranspiration, throughfall, and surface and subsurface runoff of the model with those observed in similar environments elsewhere. We find reasonably positive model efficiencies and high correlations between the simulated and observed streamflows, but high root-mean-square errors affecting the performance in smaller, upper sub-basins. We attribute this to errors in the water balance and JULES-LSM's inability to model baseflow. We also found a tendency to under-represent the high evapotranspiration rates of the region. We conclude that strategies to improve the representation of tropical systems to be (1) addressing errors in the forcing and (2) incorporating local wetland and regional floodplain in the subsurface representation

3. Eventos hidrológicos extremos en la cuenca amazónica peruana: presente y futuro

Recientemente, severos eventos hidrológicos extremos han ocurrido en el Río Amazonas, como intensas sequías e inundaciones, las cuales han perjudicado a las principales ciudades amazónicas y a las zonas rurales. Esos eventos hacen parte de una tendencia hacia estiajes siempre más bajos. Mientras que el caudal más bajo fue observado en septiembre de 2010 (8 300m3/s) en la estación hidrométrica de Tamshiyacu, una rápida transición hacia uno de los caudales más altos fue observado en abril 2011 (45 000 m3/s). Finalmente en abril de 2012, durante el siguiente periodo de aguas altas, el Río Amazonas experimentó su caudal histórico más elevado (55 400m3/s). Los modelos climatológicos e hidrológicos permiten prever caudales futuros. Para la mitad del siglo 21 se calcula un aumento de 7% de los caudales de crecida, lo que significa extremos aún mayores que los actuales e inundaciones más amplias.La région du fleuve Amazone a récemment connu de sévères événements hydrologiques extrêmes: des inondations et des sécheresses qui ont porté préjudice tant aux villes amazoniennes qu’aux zones rurales. Ces événements s’inscrivent dans une tendance vers des étiages toujours plus prononcés. Alors que le débit le plus bas a été observé en septembre 2008 (8 300 m3/s) a la station hydrométrique de Tamshiyacu, celui-ci a été rapidement suivi d’une rapide transition vers l’un des débits les plus hauts en avril 2011 (45 000 m3/s). Finalement en avril 2012, lors de la saison suivante de hautes eaux, le fleuve Amazone a présenté un débit historique très élevé (55 400 m3/s). Les modelés climatologiques et hydrologiques permettent de prévoir les débits futurs. D’ici la moitié du 21ème siècle, on estime qu’il y aura une augmentation de 7% des débits de crue, ce qui signifie des extrêmes encore plus élevés qu’actuellement et des inondations de plus grande ampleur.The Amazon River has recently experienced severe extreme hydrological events -such as floods and droughts- that have harmed both the main Amazonian cities as rural areas. These events are part of a continuous trend towards low flow. While the lowest rate was observed in September 2008 (8,300 m3/s) at the Tamshiyacu hydrometric station, it was observed a rapid transition to one of the highest rates in April 2011 (45,000m3/s). In April 2012, during the next period of high water, the Amazon River experienced it highest flow in its history (55 400 m3/s). Climatological and hydrological models are used to predict future rates. An increase of 7% of flood flows is calculated by the middle of the 21st century, which means even greater extreme floods than the current ones and larger

5. Impacto del cambio climático en la sedimentación y en la acumulación de carbono en los lagos de la Amazonia peruana

Los suelos, las aguas y los sedimentos de la cuenca amazónica son importantes compartimentos del ciclo de carbono, el cual se encuentra parcialmente almacenado en los bosques inundables y en los lagos de inundación de la región (20% de la superficie total de la cuenca). Estudiar los procesos de sedimentación lacustres a diferentes escalas espaciales y de tiempo permite mejorar le estimación del balance biogeoquímico del carbono (uno de los gases de efecto Invernadero responsable del cambio climático actual, el CO2). Las tasas de sedimentación en las áreas de inundación dependen de varios factores, como el tipo de agua de los lagos y del tipo de conexión que tienen con los ríos. El análisis en laboratorio de muestras de sedimentos, que mantienen la secuencia de deposición, sirve para determinar las condiciones geológicas, meteorológicas, los cambios en el ecosistema e incluso acciones de origen humano que pueden haber afectado los regímenes de sedimentación y la composición de los sedimentos a lo largo del tiempo.Les sols, les eaux et les sédiments du bassin amazonien sont des compartiments importants du cycle du carbone, qui est partiellement stocké dans les forêts et les lacs inondés dans la région (20% de la superficie totale du bassin). Connaître les processus de sédimentation lacustres à différentes échelles spatiales et temporelles permet d'améliorer l'estimation de l'équilibre biogéochimique du carbone (un des gaz responsables du changement climatique actuel, CO2). Les taux de sédimentation dans la plaine inondable dépendent de plusieurs facteurs, y compris le type d'eau des lacs et le type de connexion avec les rivières. Les analyses de laboratoire des échantillons de sédiments, qui maintiennent la séquence de dépôt, sont utilisées pour déterminer les caractéristiques géologiques, les conditions météorologiques, les changements dans l'écosystème et même les actions humaines qui peuvent avoir une incidence sur les régimes de sédimentation et la composition des sédiments au fil du temps.The soils, waters and sediments of the Amazon basin are important compartments of the carbon cycle, which are partially stored in flooded forests and lakes of flooding in the region (20% of the total basin area). The study of lacustrine sedimentation processes at different spatial and temporal scales allows improving the estimation of biogeochemical carbon balance (one of the greenhouse gases responsible for the current climate change, CO2). Sedimentation rates in flood areas depend on several factors, such as the type of water from lakes and the type of connection this water has with rivers. The laboratory analysis of sediment samples, which maintain the deposition sequence, is used to determine geological and meteorological conditions; as well as changes in the ecosystem, even actions arising from humans that may have affected the sedimentation regimes and sediment composition along the time

4. HYBAM: un observatorio para medir el impacto del Cambio Climático sobre la erosión y los flujos de sedimentos en la zona Andino-Amazónica

La cuenca Amazónica es la más grande del mundo. La instalación del observatorio HYBAM con una amplia red de estaciones hidrológicas ubicadas desde el piedemonte andino hasta el océano Atlántico permite, desde el 2003, la generación de registros periódicos y confiables (nivel del agua, caudal, concentración de sedimentos y otros parámetros físico-químicos de la calidad del agua) a lo largo de toda la cuenca. Hoy en día, el desarrollo de técnicas satelitales, como la altimetría, permite completar eficientemente los datos obtenidos por las redes de medición en los ríos. El recrudecimiento de eventos extremos en la Amazonia (Inundaciones, sequias,) por efecto del cambio climático actual asociado a un cambio acelerado de ocupación de los suelos (deforestación, prácticas agrícolas), tiene una incidencia directa sobre la producción sedimentarla. Conocer los flujos de materiales transportados por los ríos es esencial tanto para la navegación fluvial como para guiar la explotación de los recursos naturales (agua, petróleo, minerales), para conocer el transporte de partículas contaminantes o para diseñar infraestructuras.Le bassin de l’Amazone est le plus grand du monde. La mise en œuvre de l’observatoire HYBAM avec un vaste réseau de stations hydrologiques situées sur les contreforts des Andes jusqu’á l’océan Atlantique permet de générer, depuis 2003, des données régulières et fiables tout le long du bassin (hauteur d’eau, débit, concentration de sédiments et d’autres paramètres physico-chimiques de qualité de l’eau). De nos jours, la mise au point des techniques par satellite, tels que l’altimétrie, permet de compléter efficacement les données obtenues par les réseaux de mesure dans les rivières. L’intensification des événements extrêmes dans la région amazonienne (inondations, sécheresses), liés au changement climatique actuel associé á un changement rapide de l’utilisation des terres (déforestation, pratiques agricoles), ont un impact direct sur la production de sédiments. Connaître les flux de matières transportés par les rivières est essentiel pour la navigation fluviale ainsi que pour guider l’exploitation des ressources naturelles (eau, pétrole, minéraux), connaître le trajet de particules polluantes ou concevoir des infrastructures.The Amazon basin is the largest basin in the world. The implementation of the HYBAM observatory, which has installed a large network of hydrological stations located from the Andean foothills down to the Atlantic Ocean, allows since 2003, generate periodical and reliable records (such as water level, flow, sediment concentration and other physicochemical parameters of water quality) along the entire basin. Nowadays, the development of satellite techniques, (such as altimetry), makes it possible to efficiently complete the data obtained by the measurement networks in rivers. The intensification of extreme events in the Amazon region (floods, droughts) occurred as a result of the current Climate Change associated with a more rapid change of land use (deforestation, agricultural practices) have a direct impact on sediment production. It is essential to know the flows of the materials transported by rivers, both for river navigation as well as to guide the exploitation of natural resources (water, oil, minerals), to know the transport of particulate pollutants, or to design infrastructures

Test of CPT Symmetry and Quantum Mechanics with Experimental data from CPLEAR

We use fits to recent published CPLEAR data on neutral kaon decays to $\pi^+\pi^-$ and $\pi e\nu$ to constrain the CPT--violation parameters appearing in a formulation of the neutral kaon system as an open quantum-mechanical system. The obtained upper limits of the CPT--violation parameters are approaching the range suggested by certain ideas concerning quantum gravity.Comment: 9 pages of uuencoded postscript (includes 3 figures

Search for displaced vertices arising from decays of new heavy particles in 7 TeV pp collisions at ATLAS

We present the results of a search for new, heavy particles that decay at a significant distance from their production point into a final state containing charged hadrons in association with a high-momentum muon. The search is conducted in a pp-collision data sample with a center-of-mass energy of 7 TeV and an integrated luminosity of 33 pb^-1 collected in 2010 by the ATLAS detector operating at the Large Hadron Collider. Production of such particles is expected in various scenarios of physics beyond the standard model. We observe no signal and place limits on the production cross-section of supersymmetric particles in an R-parity-violating scenario as a function of the neutralino lifetime. Limits are presented for different squark and neutralino masses, enabling extension of the limits to a variety of other models.Comment: 8 pages plus author list (20 pages total), 8 figures, 1 table, final version to appear in Physics Letters

Measurement of the polarisation of W bosons produced with large transverse momentum in pp collisions at sqrt(s) = 7 TeV with the ATLAS experiment

This paper describes an analysis of the angular distribution of W->enu and W->munu decays, using data from pp collisions at sqrt(s) = 7 TeV recorded with the ATLAS detector at the LHC in 2010, corresponding to an integrated luminosity of about 35 pb^-1. Using the decay lepton transverse momentum and the missing transverse energy, the W decay angular distribution projected onto the transverse plane is obtained and analysed in terms of helicity fractions f0, fL and fR over two ranges of W transverse momentum (ptw): 35 < ptw < 50 GeV and ptw > 50 GeV. Good agreement is found with theoretical predictions. For ptw > 50 GeV, the values of f0 and fL-fR, averaged over charge and lepton flavour, are measured to be : f0 = 0.127 +/- 0.030 +/- 0.108 and fL-fR = 0.252 +/- 0.017 +/- 0.030, where the first uncertainties are statistical, and the second include all systematic effects.Comment: 19 pages plus author list (34 pages total), 9 figures, 11 tables, revised author list, matches European Journal of Physics C versio