Electrical, Thermal and Spectroscopic Characterization of Bulk Bi2Se3 Topological Insulator

We report electrical (angular magneto-resistance, and Hall), thermal (heat capacity) and spectroscopic (Raman, x-ray photo electron, angle resolved photo electron) characterization of bulk Bi2Se3 topological insulator, which is being is grown by self flux method through solid state reaction from high temperature (950C) melt and slow cooling (2C/hour) of constituent elements. Bi2Se3 exhibited metallic behaviour down to 5K. Magneto transport measurements revealed linear up to 400% and 30% MR at 5K under 14 Tesla field in perpendicular and parallel field direction respectively. We noticed that the magneto-resistance (MR) of Bi2Se3 is very sensitive to the angle of applied field. MR is maximum when the field is normal to the sample surface, while it is minimum when the field is parallel. Hall coefficient (RH) is seen nearly invariant with negative carrier sign down to 5K albeit having near periodic oscillations above 100K. Heat capacity (Cp) versus temperature plot is seen without any phase transitions down to 5K and is well fitted (Cp = gammaT + betaT3) at low temperature with calculated Debye temperature (ThetaD) value of 105.5K. Clear Raman peaks are seen at 72, 131 and 177 cm-1 corresponding to A1g1, Eg2 and A1g2 respectively. Though, two distinct asymmetric characteristic peak shapes are seen for Bi 4f7/2 and Bi 4f5/2, the Se 3d region is found to be broad displaying the overlapping of spin - orbit components of the same. Angle-resolved photoemission spectroscopy (ARPES) data of Bi2Se3 revealed distinctly the bulk conduction bands (BCB), surface state (SS), Dirac point (DP) and bulk valence bands (BVB) and 3D bulk conduction signatures are clearly seen. Summarily, host of physical properties for as grown Bi2Se3 crystal are reported here.Comment: 6 Pages Text + Figs; Comments Suggestions welcom

Superconductivity at 5.5 K in Nb2PdSe5 compound

We report superconductivity in as synthesized Nb2PdSe5, which is similar to recently discovered Nb2PdS5 compound having very high upper critical field, clearly above the Pauli paramagnetic limit [Sci. Rep. 3, 1446 (2013)]. A bulk polycrystalline Nb2PdSe5 sample is synthesized by solid state reaction route in phase pure structure. The structural characterization has been done by X ray diffraction, followed by Rietveld refinements, which revealed that Nb2PdSe5 sample is crystallized in monoclinic structure with in space group C2/m. Structural analysis revealed the formation of sharing of one dimensional PdSe2 chains. Electrical and magnetic measurements confirmed superconductivity in Nb2PdSe5 compound at 5.5K. Detailed magneto-resistance results, exhibited the value of upper critical field to be around 8.2Tesla. The estimated Hc2(0) is within Pauli Paramagnetic limit, which is unlike the Nb2PdS5.Comment: 13 pages text + Fig

Facile synthesis and photoluminescence spectroscopy of 3D-triangular GaN nano prism islands

We report a strategy for fabrication of 3D triangular GaN nano prism islands (TGNPI) grown on Ga/Si(553) substrate at tow temperature by N-2(+) ions implantation using a sputtering gun technique. The annealing of Ga/Si(553) (600 degrees C) followed by nitridation (2 key) shows the formation of high quality GaN TGNPI cross-section. TGNPI morphology has been confirmed by atomic force microscopy. Furthermore, these nano prism islands exhibit prominent ultra-violet luminescence peaking at 366 nm upon 325 nm excitation wavelength along with a low intensity yellow luminescence broad peak at 545 nm which characterizes low defects density TGNPI. Furthermore, the time-resolved spectroscopy of luminescent TGNPI in nanoseconds holds promise for its futuristic application in next generation UV-based sensors as well as many portable optoelectronic devices

Pan-Asian adapted ESMO Clinical Practice Guidelines for the diagnosis, treatment and follow-up of patients with endometrial cancer

Endometrial cancer; Guidelines; TreatmentCàncer d'endometri; Pautes; TractamentCáncer de endometrio; Pautas; TratamientoThe most recent version of the European Society for Medical Oncology (ESMO) Clinical Practice Guidelines for the diagnosis, treatment and follow-up of patients with endometrial cancer was published in 2022. It was therefore decided, by both the ESMO and the Indian Society of Medical and Paediatric Oncology (ISMPO), to convene a virtual meeting in July 2022 to adapt the ESMO 2022 guidelines to take into account the variations in the management of endometrial cancer in Asia. These guidelines represent the consensus opinion of a panel of Asian experts representing the oncological societies of China (CSCO), India (ISMPO), Indonesia (ISHMO), Japan (JSMO), Korea (KSMO), Malaysia (MOS), the Philippines (PSMO), Singapore (SSO), Taiwan (TOS) and Thailand (TSCO). Voting was based on scientific evidence and was conducted independently of the current treatment practices and treatment access constraints in the different Asian countries, which were discussed when appropriate. The aim of this guideline manuscript is to provide guidance for the optimisation and harmonisation of the management of patients with endometrial cancer across the different regions of Asia, drawing on the evidence provided by Western and Asian trials whilst respecting the variations in clinical presentation, diagnostic practices including molecular profiling and disparities in access to therapeutic options, including drug approvals and reimbursement strategies.All costs relating to this consensus conference were covered by the ESMO and the ISMPO from central dedicated funds. There was no external funding of the event or the manuscript production

Structural and magnetic phenomena in Ni53Mn25Al22 thin film prepared by rf magnetron sputtering

Magnetic and structural properties of Ni–Mn–Al thin films are investigated. It is demonstrated that the annealed film shows L21 phase at room temperature. Magnetometry measurements reveal that the annealed film is ferromagnetic and a first order transition in magnetization versus temperature measurement confirms that the martensite to austenite transition occurs around room temperature. Transmission electron microscopy measurements confirm that this structural change occurs just below room temperature. The splitting of Mn 2p3/2 level in x-ray photoelectron spectroscopy core level spectra of the annealed Ni–Mn–Al film, confirms that the origin of magnetism is definitely correlated with the local magnetic moment at the Mn atoms

Performance analysis of anomalous photocatalytic activity of Cr-doped TiO2 nanoparticles [Cr(x)TiO2(1-x)]

We report the synthesis and characterisation of pristine and chromium (Cr) metal ion-doped titanium dioxide nanoparticles [Cr(x)TiO2(1-x)] to study the anomalous effect of Cr doping on the photocatalytic property of TiO2. The presence of dopants generates more number of recombination pairs and increases surface coverage sites which decreases photocatalytic activity. We study the structural morphology of the synthesised Cr(x)TiO2(1-x) samples using X-ray diffraction (XRD) and X-ray photoelectron spectroscopy analysis. The effect of Cr3+ ions on the optical properties of TiO2 has been studied using various imaging and spectroscopic techniques. Further, the effect of doping of Cr on the photocatalytic activity of TiO2 has been analysed in detail. The concentration of Cr in TiO2 has been chosen as 0, 1, 5 and 10% by weight. It has been observed that the pristine TiO2 exhibits better photocatalytic activity as compared to Cr-doped TiO2 irrespective of the Cr concentration. This can be attributed to the fact that due to Cr doping in TiO2, the number of available adsorption sites for malachite green reduces which degrades its photocatalytic activity. It is also confirmed by photoluminescence (PL) and time-resolved photoluminescence spectroscopy. PL intensity increases, and lifetime decreases with increase in doping concentration. Radiative recombination of electron and hole pairs of Cr3+ in TiO2 degrades its photocatalytic activity. The degradation efficiency is found to be 96% in the case of pristine TiO2 which reduces to 12% when doped with x = 10% concentration of chromium. Therefore, it is observed that in comparison with Cr-doped TiO2, pristine TiO2 exhibits an improved photocatalytic activity which shows the anomalous effect of Cr doping on the photocatalytic property of TiO2

Electrical, thermal and spectroscopic characterization of bulk Bi2Se3 topological insulator

We report the electrical (angular magnetoresistance and Hall), thermal (heat capacity) and spectroscopic (Raman, X-ray photoelectron, angle-resolved photoelectron) characterization of a bulk Bi2Se3 topological insulator, which was grown by self-flux method through solid-state reaction from high-temperature (950 ◦C) melt and slow cooling (2 ◦C/h) of constituent elements. Bi2Se3 exhibited metallic behaviour down to 5 K. Magnetotransport measurements revealed linear up to 400 and 30% magneto-resistance (MR) at 5 K under a 14-T field in perpendicular and parallel field directions, respectively. We noticed that the MR of Bi2Se3 is very sensitive to the angle of the applied field. The MR is maximum when the field is normal to the sample surface, while it is minimum when the field is parallel. The Hall coefficient (RH) is seen nearly invariant with a negative carrier sign down to 5 K albeit having near-periodic oscillations above 100 K. The heat capacity (Cp) versus temperature plot is seen without any phase transitions down to 5 K and is well fitted (Cp = γT + βT 3) at low temperature with a calculated Debye temperature (θD) value of 105.5 K. Clear Raman peaks are seen at 72, 131 and 177 cm−1 corresponding to A1 1g, E2g and A2 1g, respectively. Though two distinct asymmetric characteristic peak shapes are seen for Bi 4f7/2 and Bi 4f5/2, the Se 3d region is found to be broad, displaying the overlapping of spin-orbit components of the same. Angle-resolved photoemission spectroscopy (ARPES) data of Bi2Se3 revealed distinctly the bulk conduction bands (BCB), surface state (SS), Dirac point (DP) and bulk valence bands (BVB), and 3D bulk conduction signatures are clearly seen. Summarily, a host of physical properties for the as-grownBi2Se3 crystal are reported here

High yield synthesis of electrolyte heating assisted electrochemically exfoliated graphene for electromagnetic interference shielding applications

Herein, we demonstrate a facile one pot synthesis of graphene nanosheets by electrochemical exfoliation of graphite. In the present study, we report a significant increase in the yield of graphene by electrolyte heating assisted electrochemical exfoliation method. The obtained results of heating assisted electrochemically exfoliated graphene (utilizing H2SO4 + KOH + DW) synthesis clearly exhibit that the yield increases similar to 4.5 times i.e. from similar to 17% (room temperature) to similar to 77% (at 80 degrees C). A plausible mechanism for the enhanced yield based on lattice expansion and vibration of intercalated ions has been put forward and discussed in details. The quality of graphene was examined by Raman, XPS, FTIR, AFM, SEM, TEM/HRTEM and TGA techniques. The Raman as well as morphogenesis results confirm the quality of the graphene nanosheets. We have used this graphene as electromagnetic interference shielding material where a comparatively large quantity of graphene is required. This graphene exhibits enhanced shielding effectiveness (46 dB at 1 mm thickness of stacked graphene sheets in frequency region 12.4 to 18 GHz) as compared to conventional electromagnetic interference shielding materials, which is greater than the recommended limit (similar to 30 dB) for techno-commercial applications. Thus the present work is suggestive for future studies on enhancement of yield of high quality graphene by proposed method and the use of synthesized graphene in electromagnetic interference shielding and other possible applications

Luminomagnetic bifunctionality of Mn2+-bonded graphene oxide/reduced graphene oxide two dimensional nanosheets

Herein, we report the luminomagnetic bifunctional properties of two-dimensional (2D) Mn2+ bonded graphene oxide (GO)/reduced graphene oxide (RGO) nanosheets synthesized using a facile route of oxidation followed by a solvothermal reduction method. Photoluminescence (PL) studies (excited by different wavelengths) revealed that the resonant energy transfer between Mn2+ and sp(3)/sp(2) clusters of GO/RGO is responsible for the enhancement of emissions. Moreover, pH-sensitive PL behaviors have also been investigated in detail. The ferromagnetic behavior is believed to arise due to defects in Mn2+ bonded GO composites. Thus, present reduction method provides a direct route to tune and enhance the optical properties of GO and RGO nanosheets bonded with Mn2+ ions, which creates an opportunity for various technological applications