Dynamic monitoring of forearm muscles using one-dimensional sonomyography system

2007-2008 > Academic research: refereed > Publication in refereed journalVersion of RecordPublishe

Synthesis of Rotated Sparse Linear Dipole Array with Shaped Power Pattern

© 2018 ACES. A new shaped pattern synthesis method is presented in which element rotations, positions and phases are co-optimized to produce a shaped beam pattern for a sparse dipole array. Compared with conventional shaped pattern synthesis using excitation amplitude and phase optimization, the proposed method can not only reduce the number of elements But also avoid the usage of unequal power dividers. A synthesis example is provided to verify the performance of the proposed method

Performances of one-dimensional sonomyography and surface electromyography in tracking guided patterns of wrist extension

Author name used in this publication: Jun-Feng HeAuthor name used in this publication: Helen Lai-Wa Chan2008-2009 > Academic research: refereed > Publication in refereed journalAccepted ManuscriptPublishe

Reducing the number of elements in the synthesis of a broadband linear array with multiple simultaneous frequency-invariant beam patterns

© 2018 IEEE. The problem of reducing the number of elements in a broadband linear array with multiple simultaneous crossover frequency-invariant (FI) patterns is considered. Different from the single FI pattern array case, every element channel in the multiple FI pattern array is divided and followed by multiple finite-impulse-response (FIR) filters, and each of the multiple FIR filters has a set of coefficients. In this situation, a collective filter coefficient vector and its energy bound are introduced for each element, and then the problem of reducing the number of elements is transformed as minimizing the number of active collective filter coefficient vectors. In addition, the radiation characteristics including beam pointing direction, mainlobe FI property, sidelobe level, and space-frequency notching requirement for each of the multiple patterns can be formulated as multiple convex constraints. The whole synthesis method is implemented by performing an iterative second-order cone programming (SOCP). This method can be considered as a significant extension of the original SOCP for synthesizing broadband sparse array with single FI pattern. Numerical synthesis results show that the proposed method by synthesizing multiple discretized crossover FI patterns can save more elements than the original iterative SOCP by using a single continuously scannable FI pattern for covering the same space range. Moreover, even for multiple FI-patterns case with complicated space-frequency notching, the proposed method is still effective in the reduction of the number of elements

Real-time ultrasonic assessment of progressive proteoglycan depletion in articular cartilage

2008-2009 > Academic research: refereed > Publication in refereed journalAccepted ManuscriptPublishe

Linearly Polarized Shaped Power Pattern Synthesis With Sidelobe and Cross-Polarization Control by Using Semidefinite Relaxation

© 1963-2012 IEEE. In this communication, the problem of synthesizing a linearly polarized shaped power pattern with accurate control on both sidelobe and cross-polarization (XP) levels is considered. For a user-defined desired polarization direction, the definitions of realizable co-polarization (COP) and XP directions for an arbitrary propagation direction in the shaped pattern are presented. With the help of such definitions, the considered problem is formulated as finding appropriate excitations so as to produce a shaped power pattern in which the realizable COP component meets prescribed lower and upper bounds, the realizable XP component and the total power pattern are less than their upper bounds in the regions of interest. The semidefinite relaxation method in the literature is then extended to solve this vectorial pattern synthesis problem. The proposed method can include the mutual coupling and platform effects by using vectorial active element patterns of an antenna array. A set of synthesis examples with different array geometries and radiation requirements are conducted to validate the effectiveness and advantages of the proposed method

Applicability of an integrated moving sponge biocarrier-osmotic membrane bioreactor MD system for saline wastewater treatment using highly salt-tolerant microorganisms

© 2017 Elsevier B.V. Osmotic membrane bioreactors (OsMBRs) are a recent breakthrough technology designed to treat wastewater. Nevertheless, their application in high-salinity wastewater treatment is not widespread because of the effects of saline conditions on microbial community activity. In response, this study developed an integrated sponge biocarrier-OsMBR system using highly salt-tolerant microorganisms for treating saline wastewater. Results showed that the sponge biocarrier-OsMBR obtained an average water flux of 2 L/m2 h during a 92-day operation when 1 M MgCl2 was used as the draw solution. The efficiency in removing dissolved organic compounds from the proposed system was more than 99%, and nutrient rejection was close to 100%, indicating excellent performance in simultaneous nitrification and denitrification processes in the biofilm layer on the carriers. Moreover, salt-tolerant microorganisms in the sponge biocarrier-OsMBR system worked efficiently in salt concentrations of 2.4%. A polytetrafluoroethylene MD membrane (pores = 0.45 μm) served to regenerate the diluted draw solution in the closed-loop system and produce high-quality water. The moving sponge biocarrier-OsMBR/MD hybrid system demonstrated its potential to treat salinity wastewater treatment, with 100% nutrient removal and 99.9% conductivity rejection

Improved Beam-Scannable Ultra-Wideband Sparse Antenna Arrays by Iterative Convex Optimization Based on Raised Power Series Representation

© 1963-2012 IEEE. A novel method is presented to design beam-scannable ultra-wideband (UWB) sparse arrays. A concept of design frequency is introduced which transforms the beam-scannable UWB array design to the problem of synthesizing a broadside-beam array at single frequency. The raised power series (RPS) representation with appropriate parameter selection is adopted to generate initial element positions, and then an iterative convex optimization is applied to successively optimize the element positions for further sidelobe level (SLL) reduction. Multiple constraints for controlling the first-order Taylor expansion accuracy, the minimum element spacing, and the array aperture are incorporated in the iterative convex optimization to obtain stable and practical synthesis results. Several examples for synthesizing UWB arrays with different frequency bands, beam scanning, ranges and element counts are conducted to validate the effectiveness and advantages of the proposed method. It is shown that the proposed method achieves much lower SLLs than those by the original RPS method for all test cases, and it also significantly outperforms some conventional stochastic optimization methods for large UWB array cases

Current status of urban wastewater treatment plants in China

© 2016 Elsevier Ltd. The study reported and analyzed the current state of wastewater treatment plants (WWTPs) in urban China from the perspective of treatment technologies, pollutant removals, operating load and effluent discharge standards. By the end of 2013, 3508 WWTPs have been built in 31 provinces and cities in China with a total treatment capacity of 1.48 × 108 m3/d. The uneven population distribution between China's east and west regions has resulted in notably different economic development outcomes. The technologies mostly used in WWTPs are AAO and oxidation ditch, which account for over 50% of the existing WWTPs. According to statistics, the efficiencies of COD and NH3-N removal are good in 656 WWTPs in 70 cities. The overall average COD removal is over 88% with few regional differences. The average removal efficiency of NH3-N is up to 80%. Large differences exist between the operating loads applied in different WWTPs. The average operating loading rate is approximately 83%, and 52% of WWTPs operate at loadings of <80%, treating up to 40% of the wastewater generated. The implementation of discharge standards has been low. Approximately 28% of WWTPs that achieved the Grade I-A Discharge Standard of Pollutants for Municipal Wastewater Treatment Plant (GB 18918-2002) were constructed after 2010. The sludge treatment and recycling rates are only 25%, and approximately 15% of wastewater is inefficiently treated. Approximately 60% of WWTPs have capacities of 1 × 104 m3/d-5 × 104 m3/d. Relatively high energy consumption is required for small-scale processing, and the utilization rate of recycled wastewater is low. The challenges of WWTPs are discussed with the aim of developing rational criteria and appropriate technologies for water recycling. Suggestions regarding potential technical and administrative measures are provided

Compensation defects in annealed undoped liquid encapsulated Czochralski InP

As-grown undoped n-type semiconducting and annealed undoped semi-insulating (SI) liquid encapsulated Czochralski (LEC) InP has been studied by temperature dependent Hall measurement, photoluminescence spectroscopy, infrared absorption, and photocurrent spectroscopy. P-type conduction SI InP can frequently be obtained by annealing undoped LEC InP. This is caused by a high concentration of thermally induced native acceptor defects. In some cases, it can be shown that the thermally induced n-type SI property of undoped LEC InP is caused by a midgap donor compensating for the net shallow acceptors. The midgap donor is proposed to be a phosphorus antisite related defect. Traps in annealed SI InP have been detected by photocurrent spectroscopy and have been compared with reported results. The mechanisms of defect formation are discussed. © 1999 American Institute of Physics.published_or_final_versio