Parallel packet transmission based on OFDM

This paper proposes a parallel packet transmission (PPT) scheme based on orthogonal frequency division multiplexing (OFDM). The principle of the PPT scheme is to divide a packet into a number of smaller parallel packets, and transmit each smaller packet over an individual subcarrier of the OFDM symbols instead of spreading the data bits in a packet across a number of different subcarriers. It is proved theoretically that the proposed PPT scheme has higher average throughput than the conventional serial packet transmission without precoding. Furthermore, simulation results show that the OFDM system with PPT outperforms the precoded OFDM system with minimum mean squared error equalization in both uncoded and coded cases in terms of average throughput. The PPT scheme provides an alternative and simpler means to combat frequency-selective fading. © 2009 IEEE

Frequency and space precoded MIMO OFDM with substream adaptation

A new frequency and space precoding scheme for multiple input multiple output (MIMO) orthogonal frequency division multiplexing (OFDM) systems is presented. For frequency precoding, the data symbols to be transmitted are divided into multiple substreams, and a predefined unitary matrix is applied to each substream to obtain different linear combinations of data symbols in the substream to gain frequency diversity. For space precoding, different precoding matrices selected from a predefined orthogonal matrix are used to allocate each frequency precoded data symbol to all transmit antennas to gain spatial diversity. The number of substreams and the corresponding data symbol mapping scheme are also adaptively determined at the receiver under varying received signal strength and MIMO channel conditions, and are made available to the transmitter through a low-rate feedback channel. Simulation results show that the proposed MIMO OFDM system with adaptive substream selection can effectively exploit both frequency and spatial diversity, and deliver the maximum system throughput. © 2009 IEEE

MSE bounds for phase estimation in presence of recursive nuisance parameters

The mean squared error (MSE) is commonly used to measure and compare the performance of various phase estimation techniques in communications and signal processing systems. When the received signal contains recursive nuisance parameters, the MSE is extremely difficult to obtain and even the conventional modified Cramér-Rao bound (MCRB) can not be readily applied. In this paper, a recursive MSE bound and its simplified calculation method are proposed to solve the problem. As an application example, an adaptive hybrid antenna array and its associated angle-of-arrival (AoA) estimation technique are presented. The MSE of the AoA estimation is simulated and compared with the recursive MSE bound and MCRB. The results show that the proposed recursive MSE bound provides a tighter lower MSE bound than the recursive MCRB

Adaptive AoA estimation and beamforming with hybrid antenna arrays

A new type of hybrid antenna array consisting of analogue subarrays followed by a digital beamformer is proposed for practical implementation of long range high data rate millimetre wave communications systems. An adaptive algorithm, referred to as the differential beam search (DBS), is proposed for the angle of arrival (AoA) estimation to control the phase shifters in the analogue subarrays and to perform digital beamforming. This algorithm does not need the knowledge of a reference signal and effectively solves the phase ambiguity problem in AoA estimation inherent to the practical subarray configuration. The performance of the proposed DBS algorithms is demonstrated by simulations. © 2009 IEEE

Multi-gigabit microwave and millimeter-wave communications research at CSIRO

© 2014 IEEE. High speed and long range wireless backhauls are cost-effective alternatives to fibre networks and becoming more and more attractive as the demand for broadband wireless services grows rapidly in recent years. However, current commercially available wireless backhaul systems neither provide sufficiently high speed nor meet the requirements to achieve both high speed and long range at the same time with sufficiently low latency for targeted applications. Traditional microwave systems can achieve long transmission range, but the data rates are limited to a few hundred Mega bits per second only. Multi-Gigabit wireless communications can be achieved using millimetre-wave (mm-wave) frequency bands, especially the E-bands, but the practical transmission range is still a major weakness. In this paper, the state-of-the-art microwave and mm-wave technologies developed at the Commonwealth Scientific and Industrial Research Organization (CSIRO) are introduced to demonstrate CSIRO's technology leadership in multi-Gigabit wireless communications research and development. The technology trends in multi-Gigabit wireless communications are also discussed and various recently developed microwave and mm-wave systems are compared. It is hoped that this paper will stimulate further research interest and industry development

Improved quality-based channel state feedback scheme in multicast systems with greedy scheduling

© 2016 IEEE. This paper proposes an Improved Quality-Based Channel State Feedback (IQCF) scheme in multicast systems with greedy scheduling for multiple multicast groups. The proposed scheme outperforms the Quality-Based Channel State Feedback (QCF) scheme in the literature by selecting a scheduling outage group for data transmission when scheduling outage happens. We also analyze its performance in terms of average capacity and outage probability, and present a closed-form system average capacity expression over Rayleigh fading channels. The numerically evaluated analytical results are verified by simulations

An extremely wideband tapered balun for application in tightly coupled arrays

© 2016 IEEE. This paper presents the design of a single layer, compact, tapered balun with a >20:1 bandwidth and less than λ/17 in length at the lowest frequency of operation. The balun operates from 0.7GHz to over 15GHz. It can provide both impedance transformation as well as a balanced feed for tightly coupled arrays. Its performance is compared with that of a full-length balun operating over the same frequency band. There is a high degree of agreement between the two baluns

Joint transmitter and receiver I/Q imbalance estimation in presence of carrier frequency offset

© 2015 IEEE. This paper proposes a simple frequency domain joint transmitter and receiver I/Q imbalance estimation method which exploits the phase rotation introduced by carrier frequency offset. Using two frequency domain training sequences inserted in each transmission frame, the transmitter and receiver I/Q imbalances can be jointly estimated over multiple frames. The transmitter I/Q imbalance parameter can be fed back to the transmitter for I/Q imbalance pre-compensation, whereas the receiver I/Q imbalance can be compensated locally followed by conventional frequency domain equalization. Numerical simulation results show that the image rejection ratios for both transmitter and receiver after I/Q imbalance compensation can be improved to over 50 dB which is necessary for multichannel systems with high order modulation and wide transmission bandwidth

Unified out-of-band emission reduction with linear complexity for OFDM

© 2014 IEEE. This paper proposes a unified out-of-band emission (OOBE) reduction framework with linear complexity for orthogonal frequency-division multiplexing (OFDM) systems. Unlike conventional spectral precoding approaches which use orthogonal precoding matrixes, this framework composes cancellation signals from the linear combinations of data symbols and minimizes the average OOBE power with a general least-squares solution. A joint frequency domain cancellation subcarrier and data domain cancellation symbol allocation scheme is also proposed for discrete Fourier transform precoded OFDM, by which the overall signal processing complexity of the OFDM transceiver is further reduced without impact on other system performance. The advantages of the proposed scheme is verified both analytically and by simulation as compared with some well-known low-complexity OOBE reduction schemes

A Generalized Continuous Wave Synthetic Aperture Radar

© 2017 IEEE. Attention has been devoted to Synthetic Aperture Radar (SAR) for half a century. Though it is a well-proven remote sensing technique, conventional pulsed SAR has several inherent limitations. In this paper, we present a new SAR concept, called Generalized Continuous Wave SAR (GCW-SAR). By using continuous wave signaling, the GCW-SAR system achieves better performance and overcomes the limitations such as the minimum antenna area in conventional SAR. Unlike the frequency modulated continuous wave SAR (FMCW-SAR) system, the GCW-SAR image is reconstructed by correlation between the sampled raw data and the location dependent reference signals. A fast image reconstruction algorithm is also presented in the paper. The principle of GCW-SAR and the effectiveness of the proposed algorithm are validated by numerical simulation results