Micromechanics-based multiscale progressive failure simulation of 3D woven composites under compressive loading with minimal material parameters

A novel micromechanics-based multiscale progressive damage model, employing minimal material parameters, is proposed in this paper to simulate the compressive failure behaviours of 3D woven composites (3DWC). The highly realistic constructions of microscopic and mesoscopic representative volume cells are accomplished, and a set of strain amplification factor is employed to bridge the meso-scale and micro-scale numerical calculations. Considering that the multiple failure mechanisms of 3DWC under compression are all caused by the matrix failure from the microscopic perspective, a new method incorporating the micromechanics of failure (MMF) theory and 3D kinking model is developed to identify the micro matrix failure associated with the kinking of yarns, inter-fiber fracture and pure matrix failure. As a result, only the matrix parameters are required for the failure simulation of 3DWC, eliminating the necessity of using other material parameters such as the fracture toughness and failure strengths of fiber yarns, which are generally difficult to accurately obtain through experiments. The newly proposed damage model is numerically integrated into ABAQUS with a user-defined subroutine UMAT. The numerical predictions and the experimental results exhibit good agreement, verifying the feasibility and accuracy of the novel damage model.Green Open Access added to TU Delft Institutional Repository ‘You share, we take care!’ – Taverne project https://www.openaccess.nl/en/you-share-we-take-care Otherwise as indicated in the copyright section: the publisher is the copyright holder of this work and the author uses the Dutch legislation to make this work public.Structural Integrity & Composite

A reliable progressive fatigue damage model for life prediction of composite laminates incorporating an adaptive cyclic jump algorithm

In this paper, a reliable progressive fatigue damage model (PFDM) for predicting the fatigue life of composite laminates is proposed by combining the normalized fatigue life model, nonlinear residual degradation models and fatigue-improved Puck criterion. To balance the accuracy of life predictions and computational efficiency, an adaptive cyclic jump algorithm is developed and implemented within the PFDM. The sensitivity of life prediction to cyclic jump parameter has been greatly reduced by correlating the cyclic jump with the increment time and viscous coefficient. Therefore, the cyclic jump parameter can be arbitrarily selected within a relatively large range to obtain convergent results. When incorporating the adaptive cyclic jump algorithm, there is no need to define a standard for determining the material failure in numerical calculations, which effectively eliminates an artificially induced uncertainty in life predictions. Two sets of experiments are conducted to validate the proposed PFDM. The numerical predictions including static failure strength and fatigue life correlate reasonably well with the available experimental data.Structural Integrity & Composite

Fatigue delamination behavior in composite laminates at different stress ratios and temperatures

This study provides an investigation on mode I fatigue delamination growth (FDG) with fibre bridging at different R-ratios and temperatures in carbon-fibre reinforced polymer composites. FDG experiments were first conducted at different temperatures of R-ratios 0.1 and 0.5 via unidirectional double cantilever beam (DCB) specimens. A fatigue model, employing both the strain energy release rate (SERR) range and the maximum SERR around crack front as similitude parameter, was proposed to interpret FDG behavior. The use of this model can collapse FDG data with fibre bridging at different R-ratios into one master curve, obeying well with the similitude principles. Accordingly, it was found that FDG can accelerate with elevated temperature, but decrease at sub-zero temperature. Furthermore, there are strong correlations between the fatigue model parameters and temperature using this model in FDG interpretations. Taking these correlations into account can extend the model to accurately predict FDG behavior of other temperatures. Fractographic examinations demonstrated that temperature has effects on the FDG damage mechanisms. Both fibre/matrix interfacial debonding and matrix brittle failure were observed in FDG of −40℃. Fibre/matrix interfacial debonding becomes the dominant failure in FDG of RT and 80℃. No obvious difference on the fracture morphology was identified for FDG at different R-ratios of a given temperature.Green Open Access added to TU Delft Institutional Repository ‘You share, we take care!’ – Taverne project https://www.openaccess.nl/en/you-share-we-take-care Otherwise as indicated in the copyright section: the publisher is the copyright holder of this work and the author uses the Dutch legislation to make this work public.Structural Integrity & Composite

In-situ damage mechanism investigation and a prediction model for delamination with fibre bridging in composites

Carbon-fibre reinforced composites are susceptible to delamination. Fibre bridging is an important shielding mechanism frequently observed in delamination. The presence of these bridging fibres can significantly increase interlaminar resistance, making it critical to represent this phenomenon for delamination characterization in composite laminates. To this end, in-situ SEM examinations were carried out to thoroughly explore damage mechanisms around delamination front as well as in bridging fibres. It was found that micro-cracks initiated at fibre–matrix interface can gradually develop and coalesce into micro-delaminations ahead of the main crack. The accumulation of these micro-delaminations can finally cause macro delamination propagation. The performance of bridging fibres can be summarized as three typical stages, i.e. bending, fibre–matrix peeling and final breakage with crack opening. Subsequently, theoretical discussions on bridging stress distribution were conducted in accordance with these bridging mechanism examinations, contributing to a new traction-separation constitutive to represent fibre bridging performance. A FEA prediction model was finally developed to characterize delamination behavior with fibre bridging. The simulation results can agree well with the experimental data in the entire delamination, demonstrating its effectiveness in fibre-bridged delamination representation. This study also demonstrated the importance of having in-depth understanding on fibre bridging mechanisms to appropriately represent bridging performance during delamination growth in composite laminates.Green Open Access added to TU Delft Institutional Repository ‘You share, we take care!’ – Taverne project https://www.openaccess.nl/en/you-share-we-take-care Otherwise as indicated in the copyright section: the publisher is the copyright holder of this work and the author uses the Dutch legislation to make this work public.Structural Integrity & Composite

Investigation on the effect of interface properties on compressive failure behavior of 3D woven composites through micromechanics-based multiscale damage model

In this paper, the effect of interface properties on the compressive failure behavior of 3D woven composites (3DWC) is investigated by incorporating a micromechanics-based multiscale damage model (MMDM). The correlation between the mesoscopic stress of yarns and microscopic stress of constituents is established by defining a stress amplification factor. With the microscopic stresses, the fiber breakage and matrix failure can be separately evaluated at the microscale, without assuming the yarns as transversely isotropic homogeneous materials. Especially, the interfacial debonding between yarns and matrix is also a dominant damage mode within 3DWC. Given that there is still a lack of studies on the influence of interfacial properties on the compressive failure behavior of 3DWC, it is meaningful to perform numerical parametric studies to reveal how the interface properties contribute to the damage mechanisms of 3DWC under compressions. The predicted results indicate that with the increase of interface strengths and fracture toughness, the compressive resistance of 3DWC can be significantly improved, resulting in higher strength and failure strain. Additionally, the studied 3DWCs with weak, medium and strong interfaces exhibit different damage development processes.Green Open Access added to TU Delft Institutional Repository ‘You share, we take care!’ – Taverne project https://www.openaccess.nl/en/you-share-we-take-care Otherwise as indicated in the copyright section: the publisher is the copyright holder of this work and the author uses the Dutch legislation to make this work public.Structural Integrity & Composite

Mode I fatigue delamination growth with fibre bridging in multidirectional composite laminates

Fatigue delamination in multidirectional composite laminates was experimentally investigated in present study. Both the Paris relation and a modified Paris relation (with a new similitude parameter) were employed to interpret fatigue delamination with significant fibre bridging. The results clearly demonstrated that fatigue delamination was independent of fibre bridging, if a reasonable similitude parameter was used in data reduction. As a result, a master resistance curve can be fitted to determine fatigue crack growth with different amounts of fibre bridging. The energy principles were subsequently used to provide physical interpretation on fatigue delamination. The results indicated the energy release for the same fatigue crack growth remained constant with fibre bridging. Bridging fibres in most cases just periodically stored and released strain energy under fatigue loading, but had little contribution to real energy release. The master resistance curve was finally applied to predict fatigue delamination with fibre bridging. Acceptable agreement between predictions and experiments was achieved, demonstrating the validation of the modified Paris relation in fibre-bridged fatigue delamination study.Green Open Access added to TU Delft Institutional Repository ‘You share, we take care!’ – Taverne project https://www.openaccess.nl/en/you-share-we-take-care Otherwise as indicated in the copyright section: the publisher is the copyright holder of this work and the author uses the Dutch legislation to make this work public.Structural Integrity & Composite