Wheat Straw Pulping for Paper and Paperboard Production

This chapter covers relative topics on wheat straw applied as fibrous raw materials for pulping and papermaking industry, i.e., chemical components and anatomy of wheat straw, pulping process and pulping properties, paper and paperboard products from wheat straw pulps, as well as environmental protection issues. Wheat straw is a kind of annual vascular-bundled herbal arthrophyte containing cellulose fibers that are acceptable for pulping and papermaking. The chemical components and anatomy of wheat straw were discussed; practically, soda or soda-AQ chemical pulping processes are common techniques often applied for chemical pulping from wheat straw, conventional and advanced bleaching sequences were introduced, and especially ECF and TCF bleaching techniques have been successfully applied in China’s paper mills. Cooking and black liquor extraction equipment and facilities are explained; chemi-mechanical pulping properties of wheat straw, corrugated medium, and linerboard products from wheat straw CMP pulps are evaluated; and chemical recovery from chemical cooking black liquor and effluent treatment processes are discussed. In this chapter, not only laboratory research results but also some commercial operation experiences are shared. These information and knowledge described in this chapter will help readers to have a good understanding about wheat straw pulping and papermaking; they are useful for pulping and papermaking engineer as reference for design and operation management of wheat straw pulping lines

Determination of Anthraquinone Content in Lac Dye Through Combined Spectrophotometry and HPCE

AbstractThis study is aim to establish the method for determination of anthraquinone content in lac dye with the combined spectrophotometry and HPCE, With the 0.5%Mg(Ac)2-CH3OH solution as the colour-developing agent, the carminic acid concentration within the concentration of 5∼50μg/mL presents a good linear relationship with the absorbance under the wavelength of 540nm (R=0.9994). Through the test, the results showed that the total anthraquinone content in lac dye was 82.13%, average recovery rate 97.80%, RSD 1.31%. Under 291nm detection wavelength and 25°C column temperature, with pH8.035 60mmol/LNa2HPO4-Na2B4O7 • 10H2O mixed buffer as background electrolyte and 60cm × 75μm uncoated capillary column as separation lanes, separation voltage 20kV, pressure 0.5psi × 10s for sample injection, the relative contents of five components laccaic acids A, B, C, D, E were measured by peak area normalization method; combined with the spectrophotometry, the contents of five anthraquinone components - laccaic acids A, B, C, D, E were determined, respectively 40.42%, 17.66%, 2.54%, 1.51%, 20.00%

Application of Electric Automation Technology in the Wastewater Treatment Process

With the rapid development of our economy, industrialization and urbanization, the production and life of the people create a lot of wastewater, and how to treat it has become the focus of public attention. Compared with conventional methods, the application of electrical automation technology in wastewater treatment has the characteristics of convenience and high efficiency, and its role in wastewater treatment cannot be ignored. In this paper, the problems in wastewater treatment are analyzed and discussed for reference

Green Synthesis and Characterization of Gold Nanoparticles Using Lignin Nanoparticles

With the development of nanotechnology, gold nanoparticles (Au NPs) have attracted enormous attention due to their special properties. The green synthesis of Au NPs from lignin would inspire the utilization of lignin and its related functional materials. In this study, a rapid preparation process of Au NPs was investigated by utilizing lignin nanoparticles (LNPs) under room temperature without chemical addition. The LNPs acted as a reducing agent, stabilizing agent, and template for the preparation of LNPs@AuNPs. The obtained LNPs@AuNPs were characterized by UV-Vis spectrum, Transmission Electron Microscope (TEM), and X-ray photoelectron spectroscopy (XPS). The possible mechanism was illustrated by Fourier Transform Infrared Spectroscopy (FT-IR), 31P, XPS, and UV analyses. The abundant hydroxyl groups (24.96 mmol/g) favored the preparation of Au NPs. Au NPs diameters of 10–30 nm were well dispersed in the LNPs. The optimal reaction conditions were a ratio of 10 mg of LNPs to 0.05 mmol HAuCl4, room temperature, and a reaction time of 30 min. The LNPs@AuNPs exhibited excellent stability in the suspension for more than seven days. The reduction process could be related to the disruption of side chains of lignin, hydroxyl group oxidation, and hydroquinones and quinones from the comproportionation reaction. The LNPs@AuNPs would open a door for the design of Au NP/lignin-derived novel functional materials

Wet Oxidation Pretreatment of Wood Pulp Waste for Enhancing Enzymatic Saccharification

Effective pretreatment of wood pulp waste is important for enhancing enzymatic saccharification. For this reason, wet oxidation process conditions were considered with the hypothesis that the alkaline oxygen conditions would favor delignification and hydrolysis of lignocellulose. Enzymatic saccharification was greatly improved to 42.9% in terms of reducing sugar yield under the conditions of pH = 10, oxygen pressure = 1.2 MPa, time = 15 min, and temperature = 195 °C. A total of 39% of lignin and 73% of hemicellulose were removed and dissolved into the hydrolyzate. Furthermore, the chemical structure, crystallinity, and morphology of the treated substrate were characterized by Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD), and scanning electron microscopy (SEM)

Valorization of Alkaline Peroxide Mechanical Pulp by Metal Chloride-Assisted Hydrotropic Pretreatment for Enzymatic Saccharification and Cellulose Nanofibrillation

Developing economical and sustainable fractionation technology of lignocellulose cell walls is the key to reaping the full benefits of lignocellulosic biomass. This study evaluated the potential of metal chloride-assisted p-toluenesulfonic acid (p-TsOH) hydrolysis at low temperatures and under acid concentration for the co-production of sugars and lignocellulosic nanofibrils (LCNF). The results indicated that three metal chlorides obviously facilitated lignin solubilization, thereby enhancing the enzymatic hydrolysis efficiency and subsequent cellulose nanofibrillation. The CuCl2-assisted hydrotropic pretreatment was most suitable for delignification, resulting in a relatively higher enzymatic hydrolysis efficiency of 53.2%. It was observed that the higher residual lignin absorbed on the fiber surface, which exerted inhibitory effects on the enzymatic hydrolysis, while the lower lignin content substrates resulted in less entangled LCNF with thinner diameters. The metal chloride-assisted rapid and low-temperature fractionation process has a significant potential in achieving the energy-efficient and cost-effective valorization of lignocellulosic biomass

Shapes Control of Bi2WO6 Nano-Structures as Photo-Fenton Catalysts for Pulping Wastewater Treatment

Bi2WO6 assembled by flower-like microspheres and nanosheets were controllably synthesized through a one-step hydrothermal approach. Multiple technologies, including X-ray powder diffraction (XRD), scanning electron microscopy (SEM), and UV–Vis diffuse reflectance spectrum (UV–Vis), were carried out to characterize the as-synthesized samples. The photocatalytic efficiency of Bi2WO6 synthesized with a series of temperature and pH values shows different morphologies and photocatalytic properties. The photocatalyst (Bi2WO6) synthesized at 220 °C and pH of 7 exhibited the best photocatalytic performance, with the methylene blue (MB) degradation approaching 91.6% after reaction time of 60 min. Free radical capture experiments indicate that •OH is the primary reactive species in the methylene blue (MB) degradation reaction, h+ and •O2− contribute negligible influence, while the addition of H2O2 significantly improves the photocatalytic activity of Bi2WO6. Biodegraded poplar preconditioning refiner chemical alkaline peroxide mechanical pulp wastewater (PPW) was treated over Bi2WO6 under UV light (Bi2WO6/UV/H2O2); chemical oxygen demand (CODCr) and color degradation rate were 85.8% and 92.0%, respectively. These results show that Bi2WO6 semiconductors can be introduced as an efficient and stable photocatalyst for industry wastewater treatment