8 research outputs found
Recommended from our members
Design parameters and test results for a fission counter intended for operation up to 750F at high gamma dose rates
Recommended from our members
Recent developments in position-sensitive neutron counting
Continuing research on advanced methods of thermal neutron detection and position sensing with gas-filled counters was aimed at improving their performance and extending the limits of their applicability. High electron drift velocities obtained from measurements on gas mixtures containing CF/sub 4/ motivated us to evaluate the properties of /sup 3/He-CF/sub 4/ and Ar-CF/sub 4/ mixtures to show that these gases have the potential of improving the count rate capability, spatial resolution, and photon discrimination of neutron PSPCs (position-sensitive proportional counters) and fission counters. In support of the U.S. National Small-Angle Neutron Scattering (SANS) Facility we developed a large-area (65-cm x 65-cm) PSPC camera. RC position encoding was chosen for simplicity of construction, but since previous experience with this encoding method had been limited to smaller PSPCs (area < 25 cm x 25 cm), the main objective of this development was to show that RC encoding parameters and construction methods could be scaled up for larger area PSPCs. The use of the new counter gas mixtures enabled the development of position-sensitive transmission line fission counters (TLFCs) for neutron flux monitoring and a one-dimensional, curved PSPC for large-angle (130/sup 0/) neutron diffraction experiments. The main objective of these developments was to extend the capabilities of the LC-encoding method by mitigating the effects of interelectrode capacitance, and thereby increase the count rate capability
Recommended from our members
New method of proportional counter feedback biasing for wide-range radiation dose-rate monitors
A prototypic wide-range radiation dose-rate monitor for civil defense applications has been developed and tested. The specified dose-rate range (0 to 500 R/h) was displayed on a single readout scale by using feedback-controlled biasing of a proportional counter. This new method is based on controlling the avalanche multiplication factor (gas gain) of the counter by varying its bias voltage in response to its measured output current (i.e., detected dose rate). The counter output current varies between 0 and 1.5 nA in a quasi-logarithmic response to dose rates between 0 and 500 R/h. The corresponding values of gas gain and bias voltage range from 1 to 300 and 200 to 1900 V respectively
Recommended from our members