27 research outputs found
Upgraded Pulsating Heat Pipe Only For Space (U-Phos): Results of the 22nd Rexus Sounding Rocket Campaign
A large tube may still behave, to a certain extent, as a capillary in a micro-gravity environment. This very basic concept is here applied to a two-phase passive heat transfer devices in order to obtain a new family of hybrid wickless heat pipes. Indeed, a Loop Thermosyphon, which usually consists of a large tube, closed end to end in a loop, evacuated and partially filled with a working fluid and intrinsically gravity assisted, may become a capillary tube in space condition and turn its thermo-fluidic behavior into a so called Pulsating Heat Pipe (PHP), or better, a Space Pulsating Heat Pipe (SPHP). Since the objective of the present work is to experimentally demonstrate the feasibility of such a hybrid device, a SPHP has been designed, built, instrumented and tested both on ground and microgravity conditions on the 22nd ESA REXUS Sounding Rocket Campaign. Ground tests demonstrate that the device effectively work as a gravity assisted loop thermosyphon, whether the sounding rocket data clearly reveal a change in the thermal hydraulic behavior very similar to the PHP. Since a microgravity period of approximately 120s is not sufficient to reach a pseudo steady state regime, further investigation on a longer term weightless condition is mandatory
U-PHOS Project: Development of a Large Diameter Pulsating Heat Pipe Experiment on board REXUS 22
U-PHOS Project aims to analyse and characterise the behaviour of a large diameter Pulsating Heat Pipe (PHP) on board REXUS 22 sounding rocket. A PHP is a passive thermal control device consisting of a serpentine capillary tube, evacuated, partially filled with a working fluid and finally sealed. In this configuration, the liquid and vapour phases are randomly distributed in the form of liquid slugs and vapour plugs. The heat is efficiently transported by means of the self-sustained oscillatory fluid motion driven by the phase change phenomena. On ground conditions, a small diameter is required in order to obtain a confined slug flow regime. In milli-gravity conditions, buoyancy forces become less intense and the PHP diameter may be increased still maintaining the slug/plug flow configuration typical of the PHP operation. Consequently, the PHP heat power capability may be increased too. U-PHOS aims at proving that a Large Diameter PHP effectively works in milli-g conditions by characterizing its thermal response during a sounding rocket flight. The actual PHP tube is made of aluminum (3 mm inner diameter, filled with FC-72), heated at the evaporator by a compact electrical resistance, cooled at the condenser by a Phase Change Material (PCM) embedded in a metallic foam. The tube wall temperatures are recorded by means of Fibre Bragg Grating (FBG) sensors; the local fluid pressure is acquired by means of a pressure transducer. The present work intends to report the actual status of the project, focusing in particular on the experiment improvements with respect to the previous campaign
DTT - Divertor Tokamak Test facility: A testbed for DEMO
The effective treatment of the heat and power exhaust is a critical issue in the road map to the realization of the fusion energy. In order to provide possible, reliable, well assessed and on-time answers to DEMO, the Divertor Tokamak Test facility (DTT) has been conceived and projected to be carried out and operated within the European strategy in fusion technology. This paper, based on the invited plenary talk at the 31st virtual SOFT Conference 2020, provides an overview of the DTT scientific proposal, which is deeply illustrated in the 2019 DTT Interim Design Report
DTT - Divertor Tokamak Test facility - Interim Design Report
The “Divertor Tokamak Test facility, DTT” is a milestone along the international program aimed at demonstrating – in the second half of this century – the feasibility of obtaining to commercial electricity from controlled thermonuclear fusion. DTT is a Tokamak conceived and designed in Italy with a broad international vision. The construction will be carried out in the ENEA Frascati site, mainly supported by national funds, complemented by EUROfusion and European incentive schemes for innovative investments. The project team includes more than 180 high-standard researchers from ENEA, CREATE, CNR, INFN, RFX and various universities.
The volume, entitled DTT Interim Design Report (“Green Book” from the colour of the cover), briefly describes the status of the project, the planning of the design future activities and its organizational structure. The publication of the Green Book also provides an occasion for thorough discussions in the fusion community and a broad international collaboration on the DTT challenge
Rapid methods for identification of Staphylococcus aureus when both human and animal staphylococci are tested: comparison with a new immunoenzymatic assay.
A new immunoenzymatic assay (IEA) for the identification of Staphylococcus aureus strains of both human and animal origin was compared with rapid commercial kits. The sensitivities and specificities of the commercial kits varied from 90.2 to 96% and 90.8 to 93.7%, respectively. The IEA did not give any false-negative or false-positive results, while commercial kits gave high percentages of false-positive results among clumping factor-positive non-S. aureus strains. The IEA is particularly useful for isolates for which identification is doubtful, for large-scale epidemiological studies, and for identifying isolates from animals as S. aureus
Rapid methods in S. aureus identification when both human and animal staphylococci are tested: comparison with a new immunoenzymatic assay.
Serum dependent expression of Enterococcus faecalis adhesins involved in the colonization of heart cell.
The use of monoclonal antibodies for studying the biological properties of Staphylococcus aureus endo-beta-N-acetylglucosaminidase
Comparación de métodos diagnósticos de diarreas asociadas a Clostridium difficile Comparison of diagnostic methods for Clostridium difficile-associated diarrhea
Para comparar diferentes métodos de diagnóstico de diarreas asociadas a Clostridium difficile desarrollados en el marco de un estudio colaborativo, se analizaron filtrados de materia fecal de pacientes con sintomatología compatible con esta patología. Se evaluó la actividad biológica sobre células Vero (ensayo biológico), la reactividad frente a anticuerpos anti-TcdA y anti-TcdB (dot blot) y la presencia de secuencias del gen tcdB por PCR. De 177 muestras analizadas por el ensayo biológico, 44 tuvieron títulos mayores o iguales que 64. Diecinueve muestras fueron a la vez positivas en el ensayo biológico y en el análisis por PCR. Se analizaron 149 muestras por dot blot utilizando anticuerpos anti-TcdA y anti-TcdB; 46 muestras resultaron positivas para ambas toxinas, 12 muestras fueron positivas sólo para TcdB y 5 muestras sólo para TcdA. Las divergencias entre los diferentes métodos podrían estar relacionadas con la presencia de genes truncados, con un bajo número de microorganismos en las muestras analizadas o con la degradación de las toxinas. Los resultados presentados demuestran la necesidad de implementar alternativas diagnósticas que se adapten a la compleja realidad epidemiológica de este importante patógeno intestinal.In order to compare different methods for the diagnosis of Clostridium difficile-associated diarrhea, fecal filtrates from patients presenting symptoms compatible with this condition, were analyzed. Biological activity on Vero cells (biological assay), dot blot with antibodies anti-TcdA and anti-TcdB, and a PCR assay for the tcdB gene, were evaluated. Titles of biological assays were ≥ 64 for 44 out of 177 samples. Nineteen samples were positive in both biological and PCR assays. The analysis by dot blot using anti-TcdA and anti-TcdB antibodies showed that 46 samples out of 149 were positive for both toxins whereas 12 samples were only positive for TcdB, and 5 samples only positive for TcdA. Discrepancies in the different methods could be related to truncated genes, low number of microorganisms in the samples and toxin degradation. The results herein presented show the need for developing diagnostic approaches compatible with the complex epidemiological situation of this clinically relevant intestinal pathogen