Safety of higher dosages of Viscum album L. in animals and humans - systematic review of immune changes and safety parameters

<p>Abstract</p> <p>Background</p> <p><it>Viscum album </it>L extracts (VAE, mistletoe) and isolated mistletoe lectins (ML) have immunostimulating properties and a strong dose-dependent cytotoxic activity. They are frequently used in complementary cancer treatment, mainly to improve quality of life, but partly also to influence tumour growth, especially by injecting VAE locally and in high dosage. The question is raised whether these higher dosages can induce any harm or immunosuppressive effects.</p> <p>Methods</p> <p>Systematic review of all experiments and clinical studies investigating higher dosages of VAE in animals and humans (<it>Viscum album </it>> 1 mg in humans corresponding to > 0.02 mg/kg in animals or ML > 1 ng/kg) and assessing immune parameters or infections or adverse drug reactions.</p> <p>Results</p> <p>69 clinical studies and 48 animal experiments reported application of higher doses of VAE or ML and had assessed immune changes and/or harm. In these studies, <it>Viscum album </it>was applied in dosages up to 1500 mg in humans and 1400 mg/kg in animals, ML was applied up to 6.4 μg/kg in humans and in animals up to 14 μg/kg subcutaneously, 50 μg/kg nasally and 500 μg/kg orally. A variety of immune parameters showed fluctuating or rising outcomes, but no immunosuppressive effect. Side effects consisted mainly of dose-dependent flu-like symptoms (FLS), fever, local reactions at the injection site and various mild unspecific effects. Occasionally, allergic reactions were reported. After application of high doses of recombinant ML, reversible hepatotoxicity was observed in some cases.</p> <p>Conclusions</p> <p>Application of higher dosages of VAE or ML is not accompanied by immunosuppression; altogether VAE seems to exhibit low risk but should be monitored by clinicians when applied in high dosages.</p

Evaluating Primary Dendrite Trunk Diameters in Directionally Solidified Al-Si Alloys

The primary dendrite trunk diameters of Al-Si alloys that were directionally solidified over a range of processing conditions have been measured. These data are analyzed with a model based primarily on an assessment of secondary dendrite arm dissolution in the mushy zone. Good fit with the experimental data is seen and it is suggested that the primary dendrite trunk diameter is a useful metric that correlates well with the actual solidification processing parameters. These results are placed in context with the limited results from the aluminium - 7 wt. % silicon samples directionally solidified aboard the International Space Station as part of the MICAST project

Comparison of Directionally Solidified Samples Solidified Terrestrially and Aboard the International Space Station

This article reports research that has been carried out under the aegis of NASA as part of a collaboration between ESA and NASA for solidification experiments on the International Space Station (ISS). The focus has been on the effect of convection on the microstructural evolution and macrosegregation in hypoeutectic Al-Si alloys during directional solidification (DS). Terrestrial DS-experiments have been carried out at Cleveland State University (CSU) and under microgravity on the International Space Station (ISS). The thermal processing-history of the experiments is well defined for both the terrestrially processed samples and the ISS-processed samples. As of this writing, two dendritic metrics was measured: primary dendrite arm spacings and primary dendrite trunk diameters. We have observed that these dendrite-metrics of two samples grown in the microgravity environment show good agreements with models based on diffusion controlled growth and diffusion controlled ripening, respectively. The gravity-driven convection (i.e., thermosolutal convection) in terrestrially grown samples has the effect of decreasing the primary dendrite arm spacings and causes macrosegregation. Dendrite trunk diameters also show differences between the earth- and space-grown samples. In order to process DS-samples aboard the ISS, the dendritic seed crystals were partially remelted in a stationary thermal gradient before the DS was carried out. Microstructural changes and macrosegregation effects during this period are described and have modeled

Macrosegregation Resulting from Directional Solidification Through an Abrupt Change in Cross-Sections

Simulations of the directional solidification of two hypoeutectic alloys (Al-7Si alloy and Al-19Cu) and resulting macrosegregation patterns are presented. The casting geometries include abrupt changes in cross-section from a larger width of 9.5 mm to a narrower 3.2 mm width then through an expansion back to a width of 9.5 mm. The alloys were chosen as model alloys because they have similar solidification shrinkages, but the effect of Cu on changing the density of the liquid alloy is about an order of magnitude greater than that of Si. The simulations compare well with experimental castings that were directionally solidified in a graphite mold in a Bridgman furnace. In addition to the simulations of the directional solidification in graphite molds, some simulations were effected for solidification in an alumina mold. This study showed that the mold must be included in numerical simulations of directional solidification because of its effect on the temperature field and solidification. For the model alloys used for the study, the simulations clearly show the interaction of the convection field with the solidifying alloys to produce a macrosegregation pattern known as "steepling" in sections with a uniform width. Details of the complex convection- and segregation-patterns at both the contraction and expansion of the cross-sectional area are revealed by the computer simulations. The convection and solidification through the expansions suggest a possible mechanism for the formation of stray grains. The computer simulations and the experimental castings have been part of on-going ground-based research with the goal of providing necessary background for eventual experiments aboard the ISS. For casting practitioners, the results of the simulations demonstrate that computer simulations should be applied to reveal interactions between alloy solidification properties, solidification conditions, and mold geometries on macrosegregation. The simulations also presents the possibility of engineering the mold-material to avoid, or mitigate, the effects of thermosolutal convection and macrosegregation by selecting a mold material with suitable thermal properties, especially its thermal conductivity

Primary Dendrite Trunk Diameter in Al-7wt% Si Alloy Directionally Solidified Aboard the International Space Station

Under a NASA (National Aeronautics and Space Agency)-ESA (European Space Agency) collaborative research project, MICAST (Microstructure formation in casting of technical alloys under a diffusive and magnetically controlled convection conditions), three Al-7wt% Si samples (MICAST-6, MICAST-7 and MICAST2-12) were directionally solidified at growth speeds varying from 10 to 50 µm s-1 aboard the International Space Station to determine the effect of mitigating convection on the primary dendrite array. The observed primary dendrite trunk diameters during steady-state growth of MICAST samples show a good agreement with predictions from a coarsening based model developed by the authors. The trunk diameters in the terrestrial-grown equivalent samples were larger than those predicted from the model. This suggest that thermosolutal convection increases the trunk diameter of primary dendrites, perhaps by increasing their tip radius due to compositional changes

Process Demonstration For Lunar In Situ Resource Utilization-Molten Oxide Electrolysis (MSFC Independent Research and Development Project No. 5-81)

The purpose of this Focus Area Independent Research and Development project was to conduct, at Marshall Space Flight Center, an experimental demonstration of the processing of simulated lunar resources by the molten oxide electrolysis process to produce oxygen and metal. In essence, the vision was to develop two key technologies, the first to produce materials (oxygen, metals, and silicon) from lunar resources and the second to produce energy by photocell production on the Moon using these materials. Together, these two technologies have the potential to greatly reduce the costs and risks of NASA s human exploration program. Further, it is believed that these technologies are the key first step toward harvesting abundant materials and energy independent of Earth s resources

Directionally Solidified Aluminum - 7 wt% Silicon Alloys: Comparison of Earth and International Space Station Processed Samples

Primary dendrite arm spacings of Al-7 wt% Si alloy directionally solidified in low gravity environment of space (MICAST-6 and MICAST-7: Thermal gradient approx. 19 to 26 K/cm, Growth speeds varying from 5 to 50 microns/s show good agreement with the Hunt-Lu model. Primary dendrite trunk diameters of the ISS processed samples show a good fit with a simple analytical model based on Kirkwood s approach, proposed here. Natural convection, a) decreases primary dendrite arm spacing. b) appears to increase primary dendrite trunk diameter

Morphology of Primary-Dendrite Array: Observations from Ground-Based and Space Station Processed Samples

A systematic analysis of the effect of convection on the microstructural evolution in cast binary, ternary and commercial Al-Si based alloys

Macrosegregation Caused by Convection Associated with Directional Solidification through Cross-Section Change

Al-7 wt% Si and Pb-6 wt% Sb alloy samples were directionally solidified (DS), with liquid above and solid below and gravity pointing down, in cylindrical graphite crucibles through an abrupt cross-section change. Fraction eutectic distribution in the microstructure, primary dendrite spacing and primary dendrite trunk diameters have been measured in the DS samples in the vicinity of section change in order to examine the effect of convection associated with the combined influence of thermosolutal factors and solidification shrinkage. It is observed that convection not only produces extensive radial and axial macrosegregation near cross-section change, it also affects the dendritic array morphology. Primary dendrite spacing and primary dendrite trunk diameter, both, are influenced by this convection. In addition to the experimental results, preliminary results from a numerical model which includes solidification shrinkage and thermosolutal convection in the mushy zone in its analysis will also be presente

Global public policy, transnational policy communities, and their networks

Public policy has been a prisoner of the word "state." Yet, the state is reconfigured by globalization. Through "global public–private partnerships" and "transnational executive networks," new forms of authority are emerging through global and regional policy processes that coexist alongside nation-state policy processes. Accordingly, this article asks what is "global public policy"? The first part of the article identifies new public spaces where global policies occur. These spaces are multiple in character and variety and will be collectively referred to as the "global agora." The second section adapts the conventional policy cycle heuristic by conceptually stretching it to the global and regional levels to reveal the higher degree of pluralization of actors and multiple-authority structures than is the case at national levels. The third section asks: who is involved in the delivery of global public policy? The focus is on transnational policy communities. The global agora is a public space of policymaking and administration, although it is one where authority is more diffuse, decision making is dispersed and sovereignty muddled. Trapped by methodological nationalism and an intellectual agoraphobia of globalization, public policy scholars have yet to examine fully global policy processes and new managerial modes of transnational public administration