TURBHO - Turbulenzmodellierung hoeherer Ordnung fuer industrielle Anwendungen

Available from TIB Hannover: F97B1647 / FIZ - Fachinformationszzentrum Karlsruhe / TIB - Technische InformationsbibliothekSIGLEBundesministerium fuer Bildung, Wissenschaft, Forschung und Technologie, Bonn (Germany)DEGerman

TURBHO - Turbulenzmodellierung hoeherer Ordnung fuer industrielle Anwendungen

Available from TIB Hannover: F97B1650 / FIZ - Fachinformationszzentrum Karlsruhe / TIB - Technische InformationsbibliothekSIGLEBundesministerium fuer Bildung, Wissenschaft, Forschung und Technologie, Bonn (Germany)DEGerman

TURBHO. Turbulenzmodellierung hoeherer Ordnung fuer industrielle Anwendungen. Design document: Module Test Phase (MTP). Software engineering module: testing

In the current Software Engineering Module (SEM-4) new physical model implementations have been tested and additional complex test cases have been investigated with the available models. For all validation test cases it has been shown that the computed results are grid independent. This has been done by systematic grid refinement studies. No grid independence has been shown so far for the Aerospatiale-A airfoil, the draft tube flow, the transonic bump flow and the impinging jet flow. Most of the main objectives of the current SEM, cf. Chapter 1, are fulfilled. These are the verification of the alternative pressure-strain term (SSG-model), the implementation of a swirl correction for the standard-#kappa#-#epsilon# turbulence model and the assembling of additional test cases. However, few results are available so far for the industrial test cases. These have to be provided in the remaining time of this project. The implementation of the Low-Reynolds model has not been completed in this SEM as the other topics were preferred for completion. Additionally to the planned items two models have been implemented and tested. These are the wall distance equation, which is considered to give an important part of a low-Reynolds model implementation, and the #kappa#-#omega# turbulence model. (orig.)SIGLEAvailable from TIB Hannover: F99B2 / FIZ - Fachinformationszzentrum Karlsruhe / TIB - Technische InformationsbibliothekBundesministerium fuer Bildung, Wissenschaft, Forschung und Technologie, Bonn (Germany)DEGerman

TURBHO. Turbulenzmodellierung hoeherer Ordnung fuer industrielle Anwendungen. Design document: Module Test Phase (MTP). Software engineering module: additional physical models

In the current Software Engineering Module (SEM2) three additional test cases have been investigated, as listed in Chapter 2. For all test cases it has been shown that the computed results are grid independent. This has been done by systematic grid refinement studies. The main objective of the current SEM2 was the verification and validation of the new wall function implementation for the k-#epsilon# mode and the SMC-model. Analytical relations and experimental data have been used for comparison of the computational results. The agreement of the results is good. Therefore, the correct implementation of the new wall function has been demonstrated. As the results in this report have shown, a consistent grid refinement can be done for any test case. This is an important improvement for industrial applications, as no model specific requirements must be considered during grid generation. (orig.)SIGLEAvailable from TIB Hannover: F99B5 / FIZ - Fachinformationszzentrum Karlsruhe / TIB - Technische InformationsbibliothekBundesministerium fuer Bildung, Wissenschaft, Forschung und Technologie, Bonn (Germany)DEGerman

TURBHO. Turbulenzmodellierung hoeherer Ordnung fuer industrielle Anwendungen. Design document: Module Design Phase (MDP). Software engineering module: additional physical models

Available from TIB Hannover: F99B4 / FIZ - Fachinformationszzentrum Karlsruhe / TIB - Technische InformationsbibliothekSIGLEBundesministerium fuer Bildung, Wissenschaft, Forschung und Technologie, Bonn (Germany)DEGerman

TURBHO - Turbulenzmodellierung hoeherer Ordnung fuer industrielle Anwendungen

Available from TIB Hannover: F97B1649 / FIZ - Fachinformationszzentrum Karlsruhe / TIB - Technische InformationsbibliothekSIGLEBundesministerium fuer Bildung, Wissenschaft, Forschung und Technologie, Bonn (Germany)DEGerman

Higher order turbulence modelling for industrial applications

Many complex flow phenomena take place in industrial applications. Their simulation requires an appropriate selection of physical models and numerical schemes in order to get reliable results. Higher order turbulence models provide a more general physical basis than presently used two equation models. Therefore, they get increased attention in industry, although a higher computational effort is often needed. On the other hand, modifications to eddy-viscosity models are being proposed to extend their range of applicability. The present paper is intended to give a comparison of different turbulence models for the specific flow phenomena of adverse pressure gradient and streamline curvature effects with the focus on robustness and accuracy of the investigated models. (orig.)SIGLEAvailable from TIB Hannover: DtF QN1(68,51) / FIZ - Fachinformationszzentrum Karlsruhe / TIB - Technische InformationsbibliothekBundesministerium fuer Bildung, Wissenschaft, Forschung und Technologie, Bonn (Germany)DEGerman