667 research outputs found
Thermal noise in half infinite mirrors with non-uniform loss: a slab of excess loss in a half infinite mirror
We calculate the thermal noise in half-infinite mirrors containing a layer of
arbitrary thickness and depth made of excessively lossy material but with the
same elastic material properties as the substrate. For the special case of a
thin lossy layer on the surface of the mirror, the excess noise scales as the
ratio of the coating loss to the substrate loss and as the ratio of the coating
thickness to the laser beam spot size. Assuming a silica substrate with a loss
function of 3x10-8 the coating loss must be less than 3x10-5 for a 6 cm spot
size and a 7 micrometers thick coating to avoid increasing the spectral density
of displacement noise by more than 10%. A similar number is obtained for
sapphire test masses.Comment: Passed LSC (internal) review. Submitted to Phys. Rev. D. (5/2001)
Replacement: Minor typo in Eq. 17 correcte
Maternal body mass index, duration of exclusive breastfeeding and children's developmental status at the age of 6 years
To access publisher full text version of this article. Please click on the hyperlink in Additional Links fieldOBJECTIVE: To investigate whether the duration of exclusive breastfeeding and maternal body mass index (BMI) are associated with children's developmental status at the time of beginning elementary school. DESIGN AND SUBJECTS: The subjects in the sample came from a longitudinal study on infant nutrition in Iceland. Food records were made once a month from birth to the age of 12 months, from which duration of exclusive breastfeeding could be determined. Mothers filled in The Icelandic developmental inventory for evaluation of motor and verbal development close to their children's sixth birthday (n = 85). Maternal self-reported weight and height was recorded. Information on socioeconomic factors was gathered by a questionnaire. RESULTS: Duration of exclusive breastfeeding, in months, was positively related to children's motor component (B = 0.5+/-0.5, P = 0.054) and to the total developmental index (B = 1.0+/-0.5, P = 0.044) at 6 y, adjusting for gender and socioeconomic factors (maternal and paternal education, and family income). Children's learning score was negatively related to maternal BMI (B = -0.5+/-0.2, P=0.047). An inverse association also appeared between maternal BMI and two out of the three developmental composite scores, that is, verbal component and the total developmental index (B = -0.6+/-0.3, P=0.049) and (B = -0.4+/-0.2, P=0.057), respectively. In multiple regression the developmental indexes were most strongly independently associated with maternal BMI (negatively) and infants' birth weight (positively). CONCLUSION: Maternal BMI and duration of breastfeeding were associated with verbal and motor development of 6-y-old children, independent of socioeconomic factors. Birth weight was also an independent determinant for developmental scores
Effect of heat treatment on mechanical dissipation in TaO coatings
Thermal noise arising from mechanical dissipation in dielectric reflective
coatings is expected to critically limit the sensitivity of precision
measurement systems such as high-resolution optical spectroscopy, optical
frequency standards and future generations of interferometric gravitational
wave detectors. We present measurements of the effect of post-deposition heat
treatment on the temperature dependence of the mechanical dissipation in
ion-beam sputtered tantalum pentoxide between 11\,K and 300\,K. We find the
temperature dependence of the dissipation is strongly dependent on the
temperature at which the heat treatment was carried out, and we have identified
three dissipation peaks occurring at different heat treatment temperatures. At
temperatures below 200\,K, the magnitude of the loss was found to increase with
higher heat treatment temperatures, indicating that heat treatment is a
significant factor in determining the level of coating thermal noise.Comment: accepted Classical and Quantum Gravity 201
Lattice dynamical signature of charge density wave formation in underdoped YBa2Cu3O6+x
We report a detailed Raman scattering study of the lattice dynamics in
detwinned single crystals of the underdoped high temperature superconductor
YBa2Cu3O6+x (x=0.75, 0.6, 0.55 and 0.45). Whereas at room temperature the
phonon spectra of these compounds are similar to that of optimally doped
YBa2Cu3O6.99, additional Raman-active modes appear upon cooling below ~170-200
K in underdoped crystals. The temperature dependence of these new features
indicates that they are associated with the incommensurate charge density wave
state recently discovered using synchrotron x-ray scattering techniques on the
same single crystals. Raman scattering has thus the potential to explore the
evolution of this state under extreme conditions.Comment: 12 pages, 11 figure
Thermal noise in interferometric gravitational wave detectors due to dielectric optical coatings
We report on thermal noise from the internal friction of dielectric coatings
made from alternating layers of Ta2O5 and SiO2 deposited on fused silica
substrates. We present calculations of the thermal noise in gravitational wave
interferometers due to optical coatings, when the material properties of the
coating are different from those of the substrate and the mechanical loss angle
in the coating is anisotropic. The loss angle in the coatings for strains
parallel to the substrate surface was determined from ringdown experiments. We
measured the mechanical quality factor of three fused silica samples with
coatings deposited on them. The loss angle of the coating material for strains
parallel to the coated surface was found to be (4.2 +- 0.3)*10^(-4) for
coatings deposited on commercially polished slides and (1.0 +- 0.3)*10^{-4} for
a coating deposited on a superpolished disk. Using these numbers, we estimate
the effect of coatings on thermal noise in the initial LIGO and advanced LIGO
interferometers. We also find that the corresponding prediction for thermal
noise in the 40 m LIGO prototype at Caltech is consistent with the noise data.
These results are complemented by results for a different type of coating,
presented in a companion paper.Comment: Submitted to LSC (internal) review Sept. 20, 2001. To be submitted to
Phys. Lett.
The collapsed tetragonal phase as a strongly covalent and fully nonmagnetic state: persistent magnetism with interlayer As-As bond formation in Rh-doped CaSrFeAs
A well-known feature of CaFeAs-based superconductors is the
pressure-induced collapsed tetragonal phase that is commonly ascribed to the
formation of an interlayer As-As bond. Using detailed X-ray scattering and
spectroscopy, we find that Rh-doped CaSrFeAs does
not undergo a first-order phase transition and that local Fe moments persist
despite the formation of interlayer As-As bonds. Our density functional theory
calculations reveal that the Fe-As bond geometry is critical for stabilizing
magnetism and that the pressure-induced drop in the lattice parameter
observed in pure CaFeAs is mostly due to a constriction within the
FeAs planes. These phenomena are best understood using an often overlooked
explanation for the equilibrium Fe-As bond geometry, which is set by a
competition between covalent bonding and exchange splitting between strongly
hybridized Fe and As states. In this framework, the collapsed
tetragonal phase emerges when covalent bonding completely wins out over
exchange splitting. Thus the collapsed tetragonal phase is properly understood
as a strong, covalent phase that is fully nonmagnetic with the As-As bond
forming as a byproduct.Comment: 6 pages, 2 figures, and 1 table. Supplemental materials are available
by reques
- …