Development of Suitable CuO-Based Materials Supported on Al2O3, MgAl2O4, and ZrO2 for Ca/Cu H2 Production Process

Functional materials for the sorption enhanced reforming process for H2 production coupled to a Cu/CuO chemical loop have been synthesized. The performance of CuO-based materials supported on Al2O3, MgAl2O4, and ZrO2 and synthesized by different routes has been analyzed. Highly stable materials supported on Al2O3 or MgAl2O4 synthesized by coprecipitation and mechanical mixing with sufficient Cu loads (around 65% wt) have been successfully developed. However, it has been found that coprecipitation under these conditions is not a suitable route for ZrO2. Spray-drying and deposition precipitation did not provide the best chemical features to the materials. As the Ca/Cu process is operated in fixed bed reactors, the best candidates were pelletized and their stability was again assessed. Pellets with high chemical and mechanical stability, high oxygen transport capacity, and good mechanical properties have been finally obtained by coprecipitation. The good homogeneity that provides this route would allow an easy scaling up

Recursive internetwork architecture, investigating RINA as an alternative to TCP/IP (IRATI)

Driven by the requirements of the emerging applications and networks, the Internet has become an architectural patchwork of growing complexity which strains to cope with the changes. Moore’s law prevented us from recognising that the problem does not hide in the high demands of today’s applications but lies in the flaws of the Internet’s original design. The Internet needs to move beyond TCP/IP to prosper in the long term, TCP/IP has outlived its usefulness. The Recursive InterNetwork Architecture (RINA) is a new Internetwork architecture whose fundamental principle is that networking is only interprocess communication (IPC). RINA reconstructs the overall structure of the Internet, forming a model that comprises a single repeating layer, the DIF (Distributed IPC Facility), which is the minimal set of components required to allow distributed IPC between application processes. RINA supports inherently and without the need of extra mechanisms mobility, multi-homing and Quality of Service, provides a secure and configurable environment, motivates for a more competitive marketplace and allows for a seamless adoption. RINA is the best choice for the next generation networks due to its sound theory, simplicity and the features it enables. IRATI’s goal is to achieve further exploration of this new architecture. IRATI will advance the state of the art of RINA towards an architecture reference model and specifcations that are closer to enable implementations deployable in production scenarios. The design and implemention of a RINA prototype on top of Ethernet will permit the experimentation and evaluation of RINA in comparison to TCP/IP. IRATI will use the OFELIA testbed to carry on its experimental activities. Both projects will benefit from the collaboration. IRATI will gain access to a large-scale testbed with a controlled network while OFELIA will get a unique use-case to validate the facility: experimentation of a non-IP based Internet

A numerical approach to analyze the performance of a PEF-Ohmic heating system in microbial inactivation of solid food

Pulsed Electric Fields (PEF) technology has been recently proposed as a new ohmic-heating system for the heat treatment of solid products in short periods (less than 1 min). However, similar to traditional ohmic heating, non-homogeneous distribution of temperature has been observed and cold points appeared in the interphase between the solid treated product and the electrodes, which can limit the technology for assuring food safety for treated solid products. In this investigation, a computational axisymmetric model of a lab-scale PEF system for a solid product (agar cylinder) was developed. This model was used to predict the temperature and the electric field distribution, treatment time, and the microbial inactivation (Salmonella Typhimurium 878) in the solid product after a PEF-ohmic treatment. Using a factorial analysis, a total of 8 process conditions with different settings of applied field strength levels (2.5–3.75 kV/cm), frequencies (100–200 Hz), and initial agar and electrode temperature (40–50°C) were simulated for the agar cylinder in order to identify the effect and optimal values of these parameters, which offer the most temperature homogeneity. The results showed that the initial temperature of the agar and the electrodes was of great importance in achieving the best temperature uniformity, limiting the occurrence of cold points, and therefore, improving the homogeneity in the level of inactivation of Salmonella Typhimurium 878 all over the agar cylinder. A treatment of 2.3 s would be enough at 3.75 kV/cm, 200 Hz with an initial temperature of 50°C of the agar and the electrodes, for a 5-Log10 reduction of Salmonella Typhimurium 878 in the whole product with a deviation of 9°C between the coldest and hottest point of the solid

Treatment of rats with a self-selected hyperlipidic diet, increases the lipid content of the main adipose tissue sites in a proportion similar to that of the lipids in the rest of organs and tissues

Adipose tissue (AT) is distributed as large differentiated masses, and smaller depots covering vessels, and organs, as well as interspersed within them. The differences between types and size of cells makes AT one of the most disperse and complex organs. Lipid storage is partly shared by other tissues such as muscle and liver. We intended to obtain an approximate estimation of the size of lipid reserves stored outside the main fat depots. Both male and female rats were made overweight by 4-weeks feeding of a cafeteria diet. Total lipid content was analyzed in brain, liver, gastrocnemius muscle, four white AT sites: subcutaneous, perigonadal, retroperitoneal and mesenteric, two brown AT sites (interscapular and perirenal) and in a pool of the rest of organs and tissues (after discarding gut contents). Organ lipid content was estimated and tabulated for each individual rat. Food intake was measured daily. There was a surprisingly high proportion of lipid not accounted for by the main macroscopic AT sites, even when brain, liver and BAT main sites were discounted. Muscle contained about 8% of body lipids, liver 1-1.4%, four white AT sites lipid 28-63% of body lipid, and the rest of the body (including muscle) 38-44%. There was a good correlation between AT lipid and body lipid, but lipid in"other organs" was highly correlated too with body lipid. Brain lipid was not. Irrespective of dietary intake, accumulation of body fat was uniform both for the main lipid storage and handling organs: large masses of AT (but also liver, muscle), as well as in the"rest" of tissues. These storage sites, in specialized (adipose) or not-specialized (liver, muscle) tissues reacted in parallel against a hyperlipidic diet challenge. We postulate that body lipid stores are handled and regulated coordinately, with a more centralized and overall mechanisms than usually assumed

Identifying house price diffusion patterns among Australian state capital cities

Prior research supports the proposition that house price diffusion shows a ripple effect along the spatial dimension. That is, house price changes in one region would reflect in subsequent house price changes in other regions, showing certain linkages among regions. Using the vector autoregression model and the impulse response function, this study investigates house price diffusion among Australia\u27s state capital cities, examining the response of one market to the innovation of other markets and determining the lagged terms for the maximum absolute value of the other markets\u27 responses. The results show that the most important subnational markets in Australia do not point to Sydney, rather towards Canberra and Hobart, while the Darwin market plays a role of buffer. The safest markets are Sydney and Melbourne. This study helps to predict house price movement trends in eight capital cities.<br /

Axial forces and bending moments in the loaded rabbit tibia in vivo

<p>Abstract</p> <p>Background</p> <p>Different animal models are used as fracture models in orthopaedic research prior to implant use in humans, although biomechanical forces can differ to a great extend between species due to variable anatomic conditions, particularly with regard to the gait. The rabbit is an often used fracture model, but biomechanical data are very rare. The objective of the present study was to measure axial forces, bending moments, and bending axis directly in the rabbit tibia <it>in vivo</it>. The following hypothesis was tested: Axial forces and bending moments in the mid-diaphysis of rabbit tibia differ from other experimental animals or indirectly calculated data.</p> <p>Methods</p> <p>A minifixateur system with 4 force sensors was developed and attached to rabbit tibia (<it>n </it>= 4), which were subsequently ostectomised. Axial forces, bending moments and bending angles were calculated telemetrically during weight bearing in motion between 6 and 42 days post operation.</p> <p>Results</p> <p>Highest single values were 201% body weight [% bw] for axial forces and 409% bw cm for bending moments. Whereas there was a continous decrease in axial forces over time after day 10 (<it>P </it>= 0.03 on day 15), a decrease in bending moments was inconsistent (<it>P </it>= 0.03 on day 27). High values for bending moments were frequently, but not consistently, associated with high values for axial forces.</p> <p>Conclusion</p> <p>Axial forces in rabbit tibia exceeded axial forces in sheep, and differed from indirectly calculated data. The rabbit is an appropriate fracture model because axial loads and bending moments in rabbit tibia were more closely to human conditions than in sheep tibia as an animal model.</p

Tecnologías del hidrógeno

El interés por las tecnologías del hidrógeno ha crecido en los últimos años, principalmente porque una economía basada en el hidrógeno puede dar respuesta a los grandes desafíos de la economía global del futuro: seguridad energética y cambio climático. Aprovechando este impulso, cada vez son más los países que están implementando un número creciente de políticas en favor del hidrógeno. Prueba de ello es la Estrategia Europea del Hidrógeno que establece al hidrógeno como un elemento esencial en| la descarbonización total del actual sistema energético para alcanzar el compromiso de la UE con la neutralidad de carbono en 2050. No obstante, el desarrollo exitoso de las tecnologías del hidrógeno requiere que todos los actores, incluidos los sectores público y privado, aumenten sus esfuerzos para acelerar su despliegue y hacer que su implantación a gran escala resulte competitiva. Los grupos de investigación que forman parte del área de trabajo de tecnologías del hidrógeno, dentro de la Plataforma Temática Interdisciplinar PTI Mobility 2030 del CSIC, trabajan en este sentido, desarrollando su labor en áreas tan diversas como la generación, el almacenamiento, la distribución y los usos del hidrógeno. The interest in hydrogen technologies has grown in recent years, mainly because an economy based on hydrogen can help to solve important challenges related to the global economy of the future: energy security and climate change. Taking advantage of this momentum, more and more countries are implementing a growing number of policies related to hydrogen. Indeed, the European Hydrogen Strategy establishes hydrogen as essential drivers for the total decarbonization of the current energy system in order to achieve the Ells commitment related to carbon neutrality by 2050. However, the successful development of the hydrogen technologies requires the collaboration of the public and private sectors to accelerate its deployment and make more competitive its implementation at large-scale. The research groups that take part of the line of work dedicated to hydrogen technologies, within the CSIC Interdisciplinary Thematic Platform PTI Mobility 2030, work in this regard, developing their investigations in several important areas related to the hydrogen technologies such as hydrogen generation, storage, distribution and uses

New basal cell carcinoma susceptibility loci.

To access publisher's full text version of this article, please click on the hyperlink in Additional Links field or click on the hyperlink at the top of the page marked Files. This article is open access.In an ongoing screen for DNA sequence variants that confer risk of cutaneous basal cell carcinoma (BCC), we conduct a genome-wide association study (GWAS) of 24,988,228 SNPs and small indels detected through whole-genome sequencing of 2,636 Icelanders and imputed into 4,572 BCC patients and 266,358 controls. Here we show the discovery of four new BCC susceptibility loci: 2p24 MYCN (rs57244888[C], OR=0.76, P=4.7 × 10(-12)), 2q33 CASP8-ALS2CR12 (rs13014235[C], OR=1.15, P=1.5 × 10(-9)), 8q21 ZFHX4 (rs28727938[G], OR=0.70, P=3.5 × 10(-12)) and 10p14 GATA3 (rs73635312[A], OR=0.74, P=2.4 × 10(-16)). Fine mapping reveals that two variants correlated with rs73635312[A] occur in conserved binding sites for the GATA3 transcription factor. In addition, expression microarrays and RNA-seq show that rs13014235[C] and a related SNP rs700635[C] are associated with expression of CASP8 splice variants in which sequences from intron 8 are retained.NCI\SAIC-Frederick, Inc. (SAIC-F) 10XS170 Roswell Park Cancer Institute 10XS171 Science Care Inc. X10S172 Laboratory, Data Analysis and Coordinating Center (LDACC) HHSN268201000029C SAIC-F 10ST1035 HHSN261200800001E Brain Bank DA006227 DA033684 N01MH000028 University of Geneva MH090941 MH101814 University of Chicago MH090951 MH090937 MH101820 MH101825 University of North Carolina-Chapel Hill MH090936 MH101819 Harvard University MH090948 Stanford University MH101782 Washington University St Louis MH101810 University of Pennsylvania MH10182