Mixed micelles and gels of a hydrophilic poloxamine (Tetronic 1307) and miltefosine: Structural characterization by small-angle neutron scattering and in vitro evaluation for the treatment of leishmaniasis

Hypothesis/background: Tetronic is a family of four-armed amphiphilic block copolymers of polyethylene oxide (PEO) and polypropylene oxide (PPO) that self-aggregate to form micelles and hydrogels. Due to their temperature and pH-responsiveness, they are emerging as smart nanomaterials in the area of drug delivery. Here we propose the use of Tetronic 1307 (T1307) as a nanocarrier of miltefosine (MF), a zwitterionic alkylphospholipid highly active against leishmaniasis, one of the most threating neglected tropical diseases. Given the amphiphilic nature of the drug, both surfactants can combine to form mixed micelles, reducing the cytotoxicity of MF by lowering its dose and improving its internalization, hence its antileishmanial effect. Experiments: The structure of the T1307 micelles, MF micelles, mixed micelles and hydrogels, formed in buffered solution (pH = 7.4) at different concentrations has been investigated in-depth by a combination of small-angle neutron scattering (SANS), dynamic light scattering (DLS), fluorescence spectroscopy and nuclear magnetic resonance methods (1D, 2D NOESY, and diffusion NMR). The cytotoxicity of the aggregates in macrophages has been assessed, as well as the antileishmanial activity in both Leishmania major promastigotes and amastigotes. Findings: T1307 and MF combine into mixed aggregates over a wide range of temperatures and compositions, forming ellipsoidal core–shell mixed micelles. The shell is highly hydrated and comprises most of the PEO blocks, while the hydrophobic core contains the PO blocks and the MF along with a fraction of EO and water molecules, depending on the molar ratio in the mixture. The combination with T1307 amplified the leishmanicidal activity of the drug against both forms of the parasite and dramatically reduced drug cytotoxicity. T1307 micelles also showed a considerable leishmanicidal activity without exhibiting macrophage toxicity. These results support the use of T1307 as a MF carrier for the treatment of human and animal leishmaniasis, in its different clinical forms

Solvent-free formation of cyclodextrin-based pseudopolyrotaxanes of polyethylene glycol: kinetic and structural aspects

Pseudopolyrotaxanes (PPRs) are supramolecular structures consisting of macrocycles able to thread on a linear polymer chain in a reversible, non-covalent way, often referred to in the literature as "molecular necklaces". While the synthesis and reaction mechanisms of these structures in solution have been widely described, their solvent-free production has received little attention, despite the advantages that this route may offer. We propose in this work a kinetic mechanism that describes the PPR formation in the solid phase as a process occurring in two consecutive stages. This mechanism has been used to investigate the spontaneous formation of a PPR that occurs when grinding alpha-Cyclodextrin (alpha-CD) with polyethylene glycol (PEG). In the threading stage, the inclusion of the polymer and subsequent release of the water molecules lodged in the cavity of the macrocycle cause vibrational changes that are reflected in the time-dependence of the FTIR-ATR spectra, while the further assembly of PPRs to form crystals produces characteristic reflections in the XRD patterns, due to the channel-like arrangement of CDs, that can be used to track the formation of the adduct in crystalline form. The effects that working variables have on the kinetics of the reaction, such as temperature, feed ratio, molar mass of the polymer and the introduction of an amorphous block in the polymer structure, have been investigated. The rate constants of the threading step increase with the temperature and the activation energy of the process increases at lower proportions of CD to PEG. This is attributed to the lower degree of covering of the polymer chain with CDs that reduces the hydrogen-bonding driven stabilization between adjacent macrocycles. The formation of crystalline PPR, which takes place slowly at room temperature, is markedly promoted at higher temperatures, with lower proportions of CD favoring both the formation and the growth of the crystals. The molar mass of the polymer does not modify the typical channel-like arrangement of packed PPRs but the conversion into crystalline PPR diminishes when using PEG1000 instead of PEG400. At a microscopic level, the crystals arrange into lamellar structures, in the order of hundreds of nm, embedded in an amorphous-like matrix. The introduction of a polypropylene oxide block in the structure of the polymer (Pluronic L62) renders poorer yields and a considerable loss of crystallinity of the product of the reaction. The methodology here proposed can be applied to the general case of inclusion complexes of CDs with drugs in the solid phase, or to multicomponent systems that contain polymers as excipients in pharmaceutical formulations along with CDs

Cyclodextrin-grafted TiO2 nanoparticles: synthesis, complexation capacity, and dispersion in polymeric matrices

The modification of the surface of titanium dioxide nanoparticles (TiO2 NPs) by the incorporation of cyclodextrins (CDs), cyclic oligosaccharides with a hydrophobic cavity, can largely improve the functionality of TiO2 by lodging molecules of interest in the CD to act directly on the surface of the nanoparticles or for further release. With this aim, we have synthesized beta CD-modified nanoparticles (beta CDTiO2 NPs) by a two-step reaction that involves the incorporation of a spacer and then the linking of the macrocycle, and characterized them by thermogravimetric analysis (TGA), Fourier transform infrared spectroscopy (FTIR), and scanning electron microscopy (SEM). The capacity of the functionalized structures to trap model compounds (Rhodamine and 1-naphthol) has been compared to that of bare TiO2 NPs by fluorescence and Ultraviolet-visible (UV-visible) spectroscopy. The presence of the CDs on the surface of the TiO2 avoids the photo-degradation of the guest, which is of interest in order to combine the photocatalytic activity of TiO2, one of its most interesting features for practical purposes, with the delivery of compounds susceptible of being photo-degraded. The beta CDTiO2 NPs have been dispersed in polymeric matrices of frequently used polymers, polyethylene (LDPE) and polyethylene oxide (PEO), by cryogenic high energy ball milling to produce nanocomposites in the form of films. The surface modification of the nanoparticles favors the homogenization of the filler in the matrix, while the nanoparticles, either in bare or functionalized form, do not seem to alter the crystallization properties of the polymer at least up to a 5% (w/w) load of filler

Supramolecular hybrid structures and gels from host-guest interactions between alpha-cyclodextrin and PEGylated organosilica nanoparticles

Polypseudorotaxanes are polymer chains threaded by molecular rings that are free to unthread; these "pearl-necklace" can self-assemble further, leading to higher-order supramolecular structures with interesting functionalities. In this work, the complexation between alpha-cyclodextrin (alpha-CD), a cyclic oligosaccharide of glucopyranose units, and poly(ethylene glycol) (PEG) grafted to silica nanoparticles was studied. The threading of alpha-CD onto the polymeric chains leads to their aggregation into bundles, followed by either the precipitation of the inclusion complex or the formation of a gel phase, in which silica nanoparticles are incorporated. The kinetics of threading, followed by turbidimetry, revealed a dependence of the rate of complexation on the following parameters: the concentration of alpha-CD, temperature, PEG length (750, 4000, and 5000 g mol(-1)), whether the polymer is grafted or free in solution, and the density of grafting. Complexation is slower, and temperature has a higher impact on PEG grafted on silica nanoparticles compared to PEG free in solution. Thermodynamic parameters extracted from the transition-state theory showed that inclusion complex formation is favored with grafted PEG compared to free PEG and establishes a ratio of complexation of five to six ethylene oxide units per cyclodextrin. The complexation yields, determined by gravimetry, revealed that much higher yields are obtained with longer chains and higher grafting density

Pyrolysis-gas chromatography/mass spectrometry identification of distinctive structures providing humic character to organic materials

Flash pyrolysis-gas chromatography/mass spectrometry (Py-GC/MS) was used to study the structural transformations of humic fractions formed as a result of composting processes of diverse organic materials (solid wastes of wineries, solid olivemill wastes, domestic wastes, ovine manures plus straw, and mixtures of animal manures). Sodium hydroxide-extracted total humic-like extracts (THE; humic plus fulvic acids) from the composted and the initial noncomposted wastes and several reference humic and fulvic acids from soils were analyzed. These results were compared with results from previous studies using 13C-cross polarization magic angle spinning-nuclear magnetic resonance (NMR), UV-visible, and fluorescence emission spectroscopies. Alkylbenzenes and alkylphenols predominate in the pyrograms of the soil humic acids, whereas the fulvic acids showed higher contents of phenolic and polysaccharide-derived compounds. The pyrolysates of THE from the composted samples showed an increase in aromatic and nitrogenated structures and a decrease in polysaccharidederived compounds. The aromatic contents as determined by Py-GC/MS and 13C-NMR were well correlated in the reference humic substances and THE from composted materials (r = 0.99 and 0.94, respectively; P < 0.01) but not in the case of THE from noncomposted materials, probably due to an aliphatic enhancement in the pyrolysates of these samples and other secondary reactions. The content in alkylbenzenes was consistent with the variations found previously for several UV-visible and fluorescence indexes as a function of the degree of humification, suggesting their involvement in structures that are a characteristic feature of the formation and evolution of humic substances.Peer Reviewe

Surface modification and characterization of basalt fibers as potential reinforcement of concretes

Basalt fibers were surface treated with silane coupling agents as a method to enhance the adhesion and durability of fiber-matrix interfaces in concrete based composite materials. In particular, this work has been focused on the study of basalt fibers chemical coatings with aminosilanes and their subsequent characterization. Surface treatments were carried out after removing the original sizing applied by manufacturer and pretreating them with an activation process of surface silanol regeneration. Different samples were considered to make convenient comparisons: as received fibers (commercial), calcinated fibers (without commercial sizing), activated samples (calcinated fibers subjected to an acid process for hydroxyl regeneration), and silanized fibers with -aminopropiltriethoxysilane, - aminopropilmethyldiethoxysilane and a mixture of 50% by weight of both silanes. A deep characterization was carried out in terms of structure using X-ray diffraction, XRD, and Fourier transform infrared spectroscopy, FTIR, thermal properties by thermogravimetric analysis, TGA, coupled with single differential thermal analysis, SDTA, and morphology by scanning electron microscopy, SEM, and atomic force microscopy, AFM

Structure and rheology of Poloxamine T1107 and its nanocomposite hydrogels with Cyclodextrin-modified Barium Titanate nanoparticles

We report the preparation of a nanocomposite hydrogel based on a poloxamine gel matrix (Tetronic T1107) and cyclodextrin (CD)-modified barium titanate (BT) nanoparticles. The micellization and sol–gel behavior of pH-responsive block copolymer T1107 were fully characterized by small-angle neutron scattering (SANS), dynamic light scattering (DLS), and Fourier transform infrared attenuated total reflectance (FTIR-ATR) spectroscopy as a function of concentration, pH and temperature. SANS results reveal that spherical micelles in the low concentration regime present a dehydrated core and highly hydrated shell, with a small aggregation number and size, highly dependent on the degree of protonation of the central amine spacer. At high concentration, T1107 undergoes a sol–gel transition, which is inhibited at acidic pH. Nanocomposites were prepared by incorporating CD-modified BT of two different sizes (50 and 200 nm) in concentrated polymer solutions. Rheological measurements show a broadening of the gel region, as well as an improvement of the mechanical properties, as assessed by the shear elastic modulus, <i>G</i>′ (up to 200% increase). Initial cytocompatibility studies of the nanocomposites show that the materials are nontoxic with viabilities over 70% for NIH3T3 fibroblast cell lines. Overall, the combination of Tetronics and modified BaTiO₃ provides easily customizable systems with promising applications as soft piezoelectric materials

Polymeric and Soft Nanocomposites Based on Cyclodextrin-Modified Barium Titanate Nanoparticles

The Ph.D. Thesis presented with the title “Polymeric and soft nanocomposites based on cyclodextrin-modified barium titanate nanoparticles” is the outcome of a few years of research on different topics covering nanomaterials, nanocomposites, polymers and cyclodextrins. In the next few lines a summary of the contents is presented. There are two guiding threads, Barium Titanate (BT) nanoparticles and Cyclodextrins (CDs), which had never been combined before this project was started. Barium Titanate is commonly known for its dielectric and piezoelectric properties, and CDs are known as stabilizing and solubilizing agents. Our idea is to prepare different kinds of polymeric nanocomposites that have in common the presence of BT as a filler, with special interest in nanocomposites from soluble polymeric precursors. For that purpose, CDs are proposed as a tool to stabilize the dispersion of the nanoparticles in the polymer solution. On a first step, we present the preparation of nanocomposites based on the thermoplastic polymer Ethylene Vinyl Acetate (EVA) and BT by means of a novel technique: cryogenic High Energy Ball Milling (HEBM). The analysis and characterization of the results show a successful dispersion of the nanoparticles within the nanocomposite. Further on, with the idea of introducing the CD in the surface of the nanoparticles in mind, we studied the inclusion complex of βCD and Rhodamine B (RhB), a fluorescent probe, characterizing it in solution and in solid state. This serves as a proof of concept for the ability of the CD to encapsulate molecules of interest for transport and further release. The next step was the modification of the BT surface to make them stable in water solution. Different approaches were studied, and the successful one with βCD, was optimized and fully characterized, with a special interest in the cytotoxicity results of the modified nanoparticles. Finally, after the good results of the modified nanoparticles in terms of cytotoxicity, the culmination of the project is the preparation and characterization of a hydrogel nanocomposite based on the poloxamine Tetronic® 1107. This soft nanocomposite combines the characteristic properties of BT and the host-guest complexation ability of the CDs. At the same time, the introduction of the nanoparticles in the hydrogel allows for the tailoring of the gelling properties, as well as an improvement of the mechanical properties of the hydrogel

Preparation, properties and water dissolution behavior of polyethylene oxide mats prepared by solution blow spinning

The relationship between processing conditions, structure and morphology are key issues to understanding the final properties of materials. For instance, in the case of polymers to be used as scaffolds in tissue engineering, wound dressings and membranes, morphology tuning is essential to control mechanical and wettability behaviors. In this work, the relationship between the processing conditions of the solution blow spinning process (SBS) used to prepare nonwoven mats of polyethylene oxide (PEO), and the structure and morphology of the resulting materials are studied systematically, to account for the thermal and mechanical behaviors and dissolution in water. After finding the optimal SBS processing conditions (air pressure, feed rate, working distance and polymer concentration), the effect of the solvent composition has been considered. The structure and morphology of the blow spun fibers are studied as well as their thermal, mechanical behaviors and dissolution in water. We demonstrate that the morphology of the fibers (size and porosity) changes with the solvent composition, which is reflected in different thermal and mechanical responses and in the dissolution rates of the materials in water