101 research outputs found
Effect of a bacteriophage cocktail in combination with modified atmosphere packaging in controlling Listeria monocytogenes on fresh-cut spinach
peer-reviewedA Listeria monocytogenes-specific bacteriophage cocktail was evaluated for its activity against a nalidixic acid-resistant L. monocytogenes (Lm-NalR) isolate on fresh-cut spinach stored under modified atmosphere packaging at various temperatures. Pieces (~2 × 2 cm2) of fresh spinach inoculated with 4.5 log CFU/cm2 Lm-NalR were sprayed with the phage cocktail (6.5 log plaque-forming units [PFU]/cm2) or a control. The samples were stored at 4°C or 10°C for up to 14 d in sealed packages filled with either atmospheric air (AA) or modified atmosphere (MA). At 4°C under AA, the phages significantly (P ≤ 0.05) lowered the Lm-NalR populations on spinach, compared to control-treated inoculated samples, by 1.12 and 1.51 log CFU/cm2 after 1 and 14 d, respectively. At 4°C under MA, Lm-NalR was significantly reduced by 1.95 log CFU/cm2 compared to control leaves after both 1 and 14 d. At 10°C under AA, the phages significantly reduced Lm-NalR by 1.50 and 2.51 log CFU/cm2 after 1 and 14 d compared to the control. Again at 10°C under MA, the phages significantly reduced Lm-NalR by 1.71 and 3.24 log CFU/cm2 compared to control after 1 and 14 d, respectively. The results support the potential of lytic bacteriophages in effectively reducing populations of L. monocytogenes on freshcut leafy produce, under both AA and MA conditions.National Institute of Food and Agriculture of the US Department of Agriculture (project #NCX-2007-03435)
Thermally stimulated currents in layered Ga4SeS3 semiconductor
Cataloged from PDF version of article.Thermally stimulated current (TSC) measurements are carried out on nominally undoped Ga4SeS3 layered semiconductor samples with the cur-rent flowing along the c-axis in the temperature range of 10 to 150 K. The results are analyzed according to various methods, such as curve fitting, initial rise and Chen's methods, which seem to be in good agreement with each other. Experimental evidence is found for the presence of three trapping centers in Ga4SeS3 with activation energies of 70, 210 and 357 meV. The calculation yielded 7.9 x 10(-21), 7.0 x 10(-19) and 1.5 x 10(-13) cm(2) for the capture cross section, and 1.6 x 10(10), 6.5 x 10(10) and 1.2 x 10(11) cm(-3) for the concentration of the traps studied. (C) 2004 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim
Premixed ammonia/hydrogen swirl combustion under rich fuel conditions for gas turbines operation
Energy storage is one of the highest priority challenges in transitioning to a low-carbon economy. Fluctuating, intermittent primary renewable sources such as wind and solar require low-carbon storage options to enable effective load matching, ensuring security of supply. Chemical storage is one such option, with low or zero carbon fuels such as hydrogen, alcohols and ammonia having been proposed. Ammonia provides zero-carbon hydrogen storage whilst offering liquefaction at relatively low pressures and atmospheric temperatures, enabling ease of transportation in a pre-existing infrastructure. Ammonia can also be used directly as a fuel in power plants such as gas turbines to avoid complete conversion back to hydrogen. It is a relatively unreactive fuel, and so it is of interest to explore the potential utilisation of ammonia/hydrogen mixtures. Hence, the goal of this paper is to provide a first assessment of the suitability of a chosen 70%NH330%H2 (%vol) blend for utilisation within a gas turbine environment, based on primary combustion diagnostics including combustion stability – via OH chemiluminescence - and emissions (NOx and NH3). An established optical generic swirl-burner enabled studies of the influence of equivalence ratio (φ > 1), ambient temperature (<484 ± 10 K) and bypass air, with a focus on NOx reduction, one of the main challenges for ammonia combustion. A numerical GT cycle model is developed alongside the experimental investigation. The results demonstrate that the blend has considerable potential as a fuel substitute with reasonable combustion stability and significant reduction of emissions for the cases without bypass air, due to increased chemical reactivity of unburned ammonia. However, emissions are still above those recommended for gas turbine cycles, with a theoretical cycle that still produces low efficiencies compared to DLN methane, highlighting the requirement for new injection techniques to reduce NOx/unburned NH3 in the flue gases whilst ensuring increased power outputs
Body segment parameters of Paralympic athletes from dual-energy X-ray absorptiometry
The final publication is available at Springer via http://dx.doi.org/10.1007/s12283-016-0200-3This research represents the first documented investigation into the body segment parameters of Paralympic athletes (e.g., individuals with spinal cord injuries and lower extremity amputations). Two-dimensional body segment parameters (i.e., mass, length, position vector of the center of mass, and principal mass moment of inertia about the center of mass) were quantified from dual-energy X-ray absorptiometry (DXA). In addition to establishing a body segment parameter database of Paralympic athletes for prospective biomechanists and engineers, the mass of each body segment as experimentally measured via the DXA imaging was compared with that reported by previous research of able-bodied cadavers. In general, there were significant differences in the body segment masses between the different methods. These findings support the implementation of the proposed database for developing valid multibody biomechanical models of Paralympic athletes with distinct physical disabilities.This research was funded by Dr. John McPhee’s Tier I Canada Research Chair in Biomechatronic System Dynamics
The frequency of osteogenic activities and the pattern of intermittence between periods of physical activity and sedentary behaviour affects bone mineral content: the cross-sectional NHANES study
BACKGROUND: Sedentary behaviours, defined as non exercising seated activities, have been shown to have deleterious effects on health. It has been hypothesised that too much sitting time can have a detrimental effect on bone health in youth. The aim of this study is to test this hypothesis by exploring the association between objectively measured volume and patterns of time spent in sedentary behaviours, time spent in specific screen-based sedentary pursuits and bone mineral content (BMC) accrual in youth. METHODS: NHANES 2005–2006 cycle data includes BMC of the femoral and spinal region via dual-energy X-ray absorptiometry (DEXA), assessment of physical activity and sedentary behaviour patterns through accelerometry, self reported time spent in screen based pursuits (watching TV and using a computer), and frequency of vigorous playtime and strengthening activities. Multiple regression analysis, stratified by gender was performed on N = 671 males and N = 677 females aged from 8 to 22 years. RESULTS: Time spent in screen-based sedentary behaviours is negatively associated with femoral BMC (males and females) and spinal BMC (females only) after correction for time spent in moderate and vigorous activity. Regression coefficients indicate that an additional hour per day of screen-based sitting corresponds to a difference of −0.77 g femoral BMC in females [95% CI: -1.31 to −0.22] and of −0.45 g femoral BMC in males [95% CI: -0.83 to −0.06]. This association is attenuated when self-reported engagement in regular (average 5 times per week) strengthening exercise (for males) and vigorous playing (for both males and females) is taken into account. Total sitting time and non screen-based sitting do not appear to have a negative association with BMC, whereas screen based sedentary time does. Patterns of intermittence between periods of sitting and moderate to vigorous activity appears to be positively associated with bone health when activity is clustered in time and inter-spaced with long continuous bouts of sitting. CONCLUSIONS: Some specific sedentary pursuits (screen-based) are negatively associated with bone health in youth. This association is specific to gender and anatomical area. This relationship between screen-based time and bone health is independent of the total amount of physical activity measured objectively, but not independent of self-reported frequency of strengthening and vigorous play activities. The data clearly suggests that the frequency, rather than the volume, of osteogenic activities is important in counteracting the effect of sedentary behaviour on bone health. The pattern of intermittence between sedentary periods and activity also plays a role in bone accrual, with clustered short bouts of activity interspaced with long periods of sedentary behaviours appearing to be more beneficial than activities more evenly spread in time
Cotton in the new millennium: advances, economics, perceptions and problems
Cotton is the most significant natural fibre and has been a preferred choice of the textile industry and consumers since the industrial revolution began. The share of man-made fibres, both regenerated and synthetic fibres, has grown considerably in recent times but cotton production has also been on the rise and accounts for about half of the fibres used for apparel and textile goods. To cotton’s advantage, the premium attached to the presence of cotton fibre and the general positive consumer perception is well established, however, compared to commodity man-made fibres and high performance fibres, cotton has limitations in terms of its mechanical properties but can help to overcome moisture management issues that arise with performance apparel during active wear.
This issue of Textile Progress aims to:
i. Report on advances in cotton cultivation and processing as well as improvements to conventional cotton cultivation and ginning. The processing of cotton in the textile industry from fibre to finished fabric, cotton and its blends, and their applications in technical textiles are also covered.
ii. Explore the economic impact of cotton in different parts of the world including an overview of global cotton trade.
iii. Examine the environmental perception of cotton fibre and efforts in organic and genetically-modified (GM) cotton production. The topic of naturally-coloured cotton, post-consumer waste is covered and the environmental impacts of cotton cultivation and processing are discussed. Hazardous effects of cultivation, such as the extensive use of pesticides, insecticides and irrigation with fresh water, and consequences of the use of GM cotton and cotton fibres in general on the climate are summarised and the effects of cotton processing on workers are addressed. The potential hazards during cotton cultivation, processing and use are also included.
iv. Examine how the properties of cotton textiles can be enhanced, for example, by improving wrinkle recovery and reducing the flammability of cotton fibre
Neurostimulatory and ablative treatment options in major depressive disorder: a systematic review
Introduction Major depressive disorder is one of the most disabling and common diagnoses amongst psychiatric disorders, with a current worldwide prevalence of 5-10% of the general population and up to 20-25% for the lifetime period. Historical perspective Nowadays, conventional treatment includes psychotherapy and pharmacotherapy; however, more than 60% of the treated patients respond unsatisfactorily, and almost one fifth becomes refractory to these therapies at long-term follow-up. Nonpharmacological techniques Growing social incapacity and economic burdens make the medical community strive for better therapies, with fewer complications. Various nonpharmacological techniques like electroconvulsive therapy, vagus nerve stimulation, transcranial magnetic stimulation, lesion surgery, and deep brain stimulation have been developed for this purpose. Discussion We reviewed the literature from the beginning of the twentieth century until July 2009 and described the early clinical effects and main reported complications of these methods. © The Author(s) 2010.Link_to_subscribed_fulltex
- …