3 research outputs found
Influence of Operating Parameters on Photocatalytic Oxidation of 2,4-Dichlorofenol in Aqueous Solution by TiO<sub>2</sub>/Stainless Steel Photocatalytic Membrane
The influence of some operating parameters of an UV photocatalytic reactor with TiO2/stainless steel photocatalytic membrane on the photocatalytic oxidation of 2,4-dichlorophenol from aqueous solutions was studied in this paper. It was shown that the pH of the working solution substantially influences the photocatalytic degradation of the organic substrate, with the degradation efficiency increasing with decreasing the pH of the working solution by a maximum corresponding to pH 3. The rate constant of the photocatalytic oxidation process is about twice as high at pH 3 comparative with pH 7 for the same initial concentration of the organic substrate. The molar ratio of hydrogen peroxide/organic substrate also influences the photocatalytic oxidation process of the organic substrate. The results obtained in this paper highlight the fact that a stoichiometric molar ratio is favorable for the photocatalytic degradation of 2,4-dichlorophenol. It has also been shown that the initial concentration of the organic substrate influences the rate of photocatalytic degradation. It appears that the rate of photocatalytic degradation decreases with the increasing of initial concentration of 2,4-dichlorophenol
Influence of Operating Parameters on Photocatalytic Oxidation of 2,4-Dichlorofenol in Aqueous Solution by TiO2/Stainless Steel Photocatalytic Membrane
The influence of some operating parameters of an UV photocatalytic reactor with TiO2/stainless steel photocatalytic membrane on the photocatalytic oxidation of 2,4-dichlorophenol from aqueous solutions was studied in this paper. It was shown that the pH of the working solution substantially influences the photocatalytic degradation of the organic substrate, with the degradation efficiency increasing with decreasing the pH of the working solution by a maximum corresponding to pH 3. The rate constant of the photocatalytic oxidation process is about twice as high at pH 3 comparative with pH 7 for the same initial concentration of the organic substrate. The molar ratio of hydrogen peroxide/organic substrate also influences the photocatalytic oxidation process of the organic substrate. The results obtained in this paper highlight the fact that a stoichiometric molar ratio is favorable for the photocatalytic degradation of 2,4-dichlorophenol. It has also been shown that the initial concentration of the organic substrate influences the rate of photocatalytic degradation. It appears that the rate of photocatalytic degradation decreases with the increasing of initial concentration of 2,4-dichlorophenol
Key Principles of Advanced Oxidation Processes: A Systematic Analysis of Current and Future Perspectives of the Removal of Antibiotics from Wastewater
In line with the development of industrial society, wastewater has caused multiple environmental problems. Contaminants of emerging concern (CECs) in water and wastewater are persistent, and for this reason they can cause serious problems for human health, animal health, and the whole environment. Therefore, it is absolutely necessary to apply efficient methods for the treatment of wastewater that has a high concentration of organic compounds. Over recent years, the prescribed and non-prescribed consumption of antibiotics has increased significantly worldwide. Large quantities of antibiotics are discharged into wastewater because of their incomplete absorption by living organisms. However, even small concentrations present in aquatic environments represent a major risk to human health and environment protection. This paper presents the main advantages and disadvantages of advanced oxidation processes, and the current state and new perspectives in the field of environment protection. This study summarizes data from the most recent specialized scientific literature that focuses on the topic of advanced oxidation processes, thus bringing all these aspects to the attention of researchers in a single work that adds comments and interpretations related to the presented processes. Advanced oxidation processes (AOPs) are often used in the treatment of different types of wastewater. AOPs are based on physicochemical processes that create significant structural changes in chemical species. The majority of antibiotics may be eliminated using physicochemical processes, such as photo-Fenton oxidation, photolysis, ozonation, electrooxidation, heterogeneous catalysis, and other bioprocesses. In comparison to conventional chemical processes, AOPs provide superior oxidation efficiency, ideal operating costs, and zero secondary pollutants