80 research outputs found
Platinum group metals: A review of resources, production and usage with a focus on catalysts
The major applications of PGMs are as catalysts in automotive industry, petroleum refin-ing, environmental (gas remediation), industrial chemical production (e.g., ammonia production, fine chemicals), electronics, and medical fields. As the next generation energy technologies for hydrogen production, such as electrolysers and fuel cells for stationary and transport applications, become mature, the demand for PGMs is expected to further increase. Reserves and annual production of Ru, Rh, Pd, Ir, and Pt have been determined and reported. Based on currently available re-sources, there is around 200 years lifetime based on current demand for all PGMs, apart from Pd, which may be closer to 100 years. Annual primary production of 190 t/a for Pt and 217 t/a for Pd, in combination with recycling of 65.4 t/a for Pt and 97.2 t/a for Pd, satisfies current demand. By far, the largest demand for PGMs is for all forms of catalysis, with the largest demand in auto catalysis. In fact, the biggest driver of demand and price for Pt, Pd, and Rh, in particular, is auto emission regu-lation, which has driven auto-catalyst design. Recovery of PGMs through recycling is generally good, but some catalytic processes, particularly auto-catalysis, result in significant dissipation. In the US, about 70% of the recycling stream from the end-of-life vehicles is a significant source of global secondary PGMs recovered from spent auto-catalyst. The significant use of PGMs in the large global auto industry is likely to continue, but the long-term transition towards electric vehicles will alter demand profiles
Effect of structural properties of carbon-based fuels on efficiency of direct carbon fuel cells
Internet of Things in Sustainable Energy Systems
Our planet has abundant renewable and conventional energy resources but technological capability and capacity gaps coupled with water-energy needs limit the benefits of these resources to citizens. Through IoT technology solutions and state-of-the-art IoT sensing and communications approaches, the sustainable energy-related research and innovation can bring a revolution in this area. Moreover, by the leveraging current infrastructure, including renewable energy technologies, microgrids, and power-to-gas (P2G) hydrogen systems, the Internet of Things in sustainable energy systems can address challenges in energy security to the community, with a minimal trade-off to environment and culture. In this chapter, the IoT in sustainable energy systems approaches, methodologies, scenarios, and tools is presented with a detailed discussion of different sensing and communications techniques. This IoT approach in energy systems is envisioned to enhance the bidirectional interchange of network services in grid by using Internet of Things in grid that will result in enhanced system resilience, reliable data flow, and connectivity optimization. Moreover, the sustainable energy IoT research challenges and innovation opportunities are also discussed to address the complex energy needs of our community and promote a strong energy sector economy
Wetting and interactions of Ag–Cu–Ti and Ag–Cu–Ni alloys with ceramic and steel substrates for use as sealing materials in a DCFC stack
Stability of oxide films formed on mild steel in turbulent flow conditions of alkaline solutions at elevated temperatures
In the industries involving alkaline solutions in different process streams, the nature and stability of oxide films formed on the metallic surfaces determine the rates of erosion–corrosion of the equipment. In the present study the characteristics of the oxide films formed on AISI 1020 steel in a 2.75 M sodium hydroxide solution at temperatures up to 175°C, have been investigated by employing electrochemical techniques of cyclic voltammetry and chronoamperometry. The experiments were carried out in an autoclave system based upon a ‘rotating cylinder electrode’ geometry to determine the effects of turbulence on the stability of the films. The results suggest that little protection is afforded in the active region (at about −0.8 VSHE). In the passive region at low potentials (−0.6 V to −0.4 VSHE), it appears the films are compact and more stable, and therefore provide good protection. At higher potentials (>−0.4 VSHE) in the passive region, the results suggest that film formation and dissolution occur simultaneously and the increase in temperature and turbulence causes a breakdown of the passive film resulting in a situation similar to nonprotective magnetite growth.<br /
Effect of increased temperature on erosion-corrosion under turbulent conditions in Bayer liquor
A study of the behaviour of mild steel in synthetic Bayer liquor at 25 °C and 95 °C showed that turbulent conditions had a small effect on the anodic currents at 25 °C, but caused large increases in currents at 95 °C. This may be due to the increased solubility of magnetite at the higher temperature.<br /
The danger of extrapolating measured corrosion data to predict the behaviour in caustic solutions at elevated temperatures
Assessment of the in vitro synergy of daptomycin plus linezolid against multidrug-resistant enterococci
The widespread incidence of enterococci resistant to ampicillin, vancomycin and aminoglycosides, the first-line anti-enterococcal antibiotics, has made the treatment of severe enterococcal infections difficult and alternatives should be explored. We investigated the activity of daptomycin combined with linezolid against three Enterococcus faecalis and four Enterococcus faecium strains resistant to standard drugs used for therapy. Minimum inhibitory concentrations (MICs) were determined by the broth dilution method. Drug interactions were assessed by the checkerboard and time-kill methods. Synergy was defined by a fractional inhibitory concentration index (FICI) of ≤0.5 or a ≥2 log10 CFU/mL killing at 24 h with the combination in comparison with killing by the most active single agent. Indifference was defined by a FICI > 0.5-4.0 or a 1-2 log10 CFU/mL killing compared with the most active single agent. MICs of daptomycin were 2-4 μg/mL for E. faecalis and 2-8 μg/mL for E. faecium. MICs of linezolid were 1-2 μg/mL for all bacteria. In the checkerboard assay, five isolates showed synergism (FICI < 0.5) and two showed indifference (FICIs of 0.53 and 2). Killing studies revealed synergy of daptomycin plus linezolid against four isolates (2.2-3.7 log10 CFU/mL kill) and indifference (1.1-1.6 log10 CFU/mL kill) for the other three strains. Antagonism was not observed. In conclusion, the combination of daptomycin and linezolid had a synergistic or indifferent effect against multidrug-resistant enterococci. Additional studies are needed to explore the potential of this combination for severe enterococcal infections when first-line antibiotic combinations cannot be used
Direct coupling of an electrolyser to a solar PV system for generating hydrogen
Hydrogen as an energy currency, carrier and storage medium may be a key component of the solution to problems of global warming, poor air quality and dwindling reserves of liquid hydrocarbon fuels. Hydrogen is a flexible storage medium and can be generated by the electrolysis of water. It is particularly advantageous if an electrolyser may be simply and efficiently coupled to a source of renewable electrical energy. This paper examines direct coupling of a polymer electrolyte membrane (PEM) electrolyser to a matched solar photovoltaic (PV) source for hydrogen generation and storage. Such direct coupling with minimum interfacing electronics would lead to substantial cost reduction and thereby enhance the economic viability of solar-hydrogen systems. The electrolyser is designed for fail-safe operation with multiple levels of safety and operational redundancy. A control system in the electrolyser unit provides for disconnection when required and for auto-start in the morning and auto shut-down at night, simultaneously addressing the goals of minimum energy loss and maximum safety. The PV system is a 2.4 kW array (20.4 m2 total area) comprising 30, 12 V, 80 W, Solarex polycrystalline modules in a series-parallel configuration. The integrated system has been operated for approximately 60 days over a 4-month period from September 2007 to January 2008 with many periods of unattended operation for multiple days, experiencing weather ranging from hot and sunny (above 40 ºC) to cool and cloudy. The principle and practicality of direct coupling of a suitably matched PV array and PEM electrolyser have been successfully demonstrated. Details of electrolyser operation coupled to a PV array along with modelling work to match current-voltage characteristics of the electrolyser and PV system are described
- …