A review of selected neighbourhood sustainability assessment frameworks using the Bellagio STAMP

Purpose The neighbourhood sustainability assessment frameworks through which a proposed neighbourhood development can be evaluated against an array of sustainability indicators began to gain prominence in the first decade of the twenty-first century. However, how these frameworks align with the Bellagio STAMP is an area yet to be examined by existing studies to inform their better development and usage in the delivery of sustainable neighbourhoods. The purpose of this paper is to review selected neighbourhood sustainability assessment frameworks using the Bellagio STAMP with the aim of identifying areas for improvement, while also exploring the possibilities of adopting the Bellagio STAMP as a consensus approach and reference to sustainability assessment at the neighbourhood level. Design/methodology/approach Adopting document analysis as a data collection method, the paper reviews BREEAM communities, LEED Neighbourhood Development, Pearl community rating system and Green Star communities using the Bellagio STAMP. Findings Findings from the study revealed that some of the selected assessment frameworks align partially with the Bellagio STAMP in their development, while areas for improvement were identified. Research limitations/implications The study recommends that the Bellagio STAMP could offer helpful guidelines and procedure in conceptualising sustainability assessment at the neighbourhood level especially in developing countries where such a framework is yet to be conceived. Originality/value This study adds to the sustainability assessment literature by operationalising the Bellagio STAMP leading to its better understanding and application in sustainability assessment either in practice or in theory

Utilising the COM-B model to interpret barriers and facilitators to cervical cancer screening in young women

As most women now reaching the age for cervical cancer screening (24.5 years old) in the UK will be HPV vaccinated, their current perspectives on screening can inform effective interventions to increase screening uptake (and thus, early detection). Twenty-four interviews were conducted with women aged 24–30 years old to explore their views on cervical cancer screening (n = 12 attendees and n = 12 non-attendees). Reflexive thematic analysis generated six themes that were then mapped onto the COM-B model. Reflective motivations (e.g. reassurance) were key facilitators to screening attendance for both groups. Social opportunities (e.g. open communication) contrasted between the groups, with attendees more likely to have discussed screening with friends. Automatic motivations (e.g. embarrassment) were key barriers to attending screening in both groups. Notably, HPV vaccination did not factor into the decision to attend screening. Interventions to increase screening uptake may target motivational and social factors

Fertility, Living Arrangements, Care and Mobility

There are four main interconnecting themes around which the contributions in this book are based. This introductory chapter aims to establish the broad context for the chapters that follow by discussing each of the themes. It does so by setting these themes within the overarching demographic challenge of the twenty-first century – demographic ageing. Each chapter is introduced in the context of the specific theme to which it primarily relates and there is a summary of the data sets used by the contributors to illustrate the wide range of cross-sectional and longitudinal data analysed

First Measurement of Z/gamma* Production in Compton Scattering of Quasi-real Photons

We report the first observation of Z/gamma* production in Compton scattering of quasi-real photons. This is a subprocess of the reaction e+e- to e+e-Z/gamma*, where one of the final state electrons is undetected. Approximately 55 pb-1 of data collected in the year 1997 at an e+e- centre-of-mass energy of 183 GeV with the OPAL detector at LEP have been analysed. The Z/gamma* from Compton scattering has been detected in the hadronic decay channel. Within well defined kinematic bounds, we measure the product of cross-section and Z/gamma* branching ratio to hadrons to be (0.9+-0.3+-0.1) pb for events with a hadronic mass larger than 60 GeV, dominated by (e)eZ production. In the hadronic mass region between 5 GeV and 60 GeV, dominated by (e)egamma* production, this product is found to be (4.1+-1.6+-0.6) pb. Our results agree with the predictions of two Monte Carlo event generators, grc4f and PYTHIA.Comment: 18 pages, LaTeX, 5 eps figures included, submitted to Physics Letters

Search for Higgs Bosons in e+e- Collisions at 183 GeV

The data collected by the OPAL experiment at sqrts=183 GeV were used to search for Higgs bosons which are predicted by the Standard Model and various extensions, such as general models with two Higgs field doublets and the Minimal Supersymmetric Standard Model (MSSM). The data correspond to an integrated luminosity of approximately 54pb-1. None of the searches for neutral and charged Higgs bosons have revealed an excess of events beyond the expected background. This negative outcome, in combination with similar results from searches at lower energies, leads to new limits for the Higgs boson masses and other model parameters. In particular, the 95% confidence level lower limit for the mass of the Standard Model Higgs boson is 88.3 GeV. Charged Higgs bosons can be excluded for masses up to 59.5 GeV. In the MSSM, mh > 70.5 GeV and mA > 72.0 GeV are obtained for tan{beta}>1, no and maximal scalar top mixing and soft SUSY-breaking masses of 1 TeV. The range 0.8 < tanb < 1.9 is excluded for minimal scalar top mixing and m{top} < 175 GeV. More general scans of the MSSM parameter space are also considered.Comment: 49 pages. LaTeX, including 33 eps figures, submitted to European Physical Journal

A Measurement of the Product Branching Ratio f(b->Lambda_b).BR(Lambda_b->Lambda X) in Z0 Decays

The product branching ratio, f(b->Lambda_b).BR(Lambda_b->Lambda X), where Lambda_b denotes any weakly-decaying b-baryon, has been measured using the OPAL detector at LEP. Lambda_b are selected by the presence of energetic Lambda particles in bottom events tagged by the presence of displaced secondary vertices. A fit to the momenta of the Lambda particles separates signal from B meson and fragmentation backgrounds. The measured product branching ratio is f(b->Lambda_b).BR(Lambda_b->Lambda X) = (2.67+-0.38(stat)+0.67-0.60(sys))% Combined with a previous OPAL measurement, one obtains f(b->Lambda_b).BR(Lambda_b->Lambda X) = (3.50+-0.32(stat)+-0.35(sys))%.Comment: 16 pages, LaTeX, 3 eps figs included, submitted to the European Physical Journal

Measurement of the Michel Parameters in Leptonic Tau Decays

The Michel parameters of the leptonic tau decays are measured using the OPAL detector at LEP. The Michel parameters are extracted from the energy spectra of the charged decay leptons and from their energy-energy correlations. A new method involving a global likelihood fit of Monte Carlo generated events with complete detector simulation and background treatment has been applied to the data recorded at center-of-mass energies close to sqrt(s) = M(Z) corresponding to an integrated luminosity of 155 pb-1 during the years 1990 to 1995. If e-mu universality is assumed and inferring the tau polarization from neutral current data, the measured Michel parameters are extracted. Limits on non-standard coupling constants and on the masses of new gauge bosons are obtained. The results are in agreement with the V-A prediction of the Standard Model.Comment: 32 pages, LaTeX, 9 eps figures included, submitted to the European Physical Journal

Surface texture metrology for metal additive manufacturing: a review

A comprehensive analysis of literature pertaining to surface texture metrology for metal additive manufacturing has been performed. This review paper structures the results of this analysis into sections that address specific areas of interest: industrial domain, additive manufacturing processes and materials; types of surface investigated; surface measurement technology and surface texture characterisation. Each section reports on how frequently specific techniques, processes or materials have been utilised and discusses how and why they are employed. Based on these results, possible optimisation of methods and reporting is suggested and the areas that may have significant potential for future research are highlighted

Measurement of (anti)deuteron and (anti)proton production in DIS at HERA

The first observation of (anti)deuterons in deep inelastic scattering at HERA has been made with the ZEUS detector at a centre-of-mass energy of 300--318 GeV using an integrated luminosity of 120 pb-1. The measurement was performed in the central rapidity region for transverse momentum per unit of mass in the range 0.3<p_T/M<0.7. The particle rates have been extracted and interpreted in terms of the coalescence model. The (anti)deuteron production yield is smaller than the (anti)proton yield by approximately three orders of magnitude, consistent with the world measurements.Comment: 26 pages, 9 figures, 5 tables, submitted to Nucl. Phys.

Quantification and characterisation of porosity in selectively laser melted Al–Si10–Mg using x-ray computed tomography

We used X-ray computed tomography (CT), microscopy and hardness measurements to study Al–Si10–Mg produced by selective laser melting (SLM). Specimens were subject to a series of heat treatments including annealing and precipitation hardening. The specimen interiors were imaged with X-ray CT, allowing the non-destructive quantification and characterisation of pores, including their spatial distribution. The specimens had porosities less than 0.1%, but included some pores with effective cross-sectional diameters up to 260 μm. The largest pores were highly anisotropic, being flat and lying in the plane normal to the build direction. Annealing cycles caused significant coarsening of the microstructure and a reduction of the hardness from (114 ± 3) HV, in the as-built state, to (45 ± 1) HV, while precipitation hardening increased this to a final hardness of (59 ± 1) HV. The pore size and shape distributions were unaffected by the heat treatments. We demonstrate the applicability of CT measurements and quantitative defect analysis for the purposes of SLM process monitoring and refinement