Efficient CO2 Sorbents Based on Silica Foam with Ultra-large Mesopores

A series of high-capacity, amine impregnated sorbents based on a cost-effective silica foam with ultra-large mesopores is reported. The sorbents exhibit fast CO2 capture kinetics, high adsorption capacity (of up to 5.8 mmol g−1 under 1 atm of dry CO2), as well as good stability over multiple adsorption–desorption cycles. A simple theoretical analysis is provided relating the support structure to sorbent performance.This publication was based on work supported by Award no. KUS-C1-018-02, made by King Abdullah University of Science and Technology (KAUST)

Thermoreversible gelation in poly(ethylene oxide)/carbon black hybrid melts

The study focuses on the structure and viscoelasticity of poly(ethylene oxide)/carbon black fluids. The hybrids when subjected to extreme thermal annealing (at temperatures far above the melting point of the matrix) exhibit a 3-4 orders of magnitude increase in viscosity. Surprisingly, the effect is reversible and the viscosity reverts back to its initial value upon subsequent cooling. This rather unique sol-gel transition in terms of strength, steepness and thermal reversibility points to major structural rearrangements via extensive particle clustering, in agreement with microscopy observations. In related systems it was found that when matrix-particle electrostatic interactions are present the gelation is essentially diminished

On modifying properties of polymeric melts by nanoscopic particles

We study geometric and energetic factors that partake in modifying properties of polymeric melts via inserting well-dispersed nanoscopic particles (NP). Model systems are polybutadiene melts including 10-150 atom atomic clusters (0.1-1.5% v/v). We tune interactions between chains and particle by van der Waals terms. Using molecular dynamics we study equilibrium fluctuations and dynamical properties at the interface. Effect of bead size and interaction strength both on volume and volumetric fluctuations is manifested in mechanical properties, quantified here by bulk modulus, K. Tuning NP size and non-bonded interactions results in ~15% enhancement in K by addition of a maximum of 1.5% v/v NP.Comment: 25 pages, 7 figure

Highly porous scaffolds of PEDOT:PSS for bone tissue engineering.

UNLABELLED: Conjugated polymers have been increasingly considered for the design of conductive materials in the field of regenerative medicine. However, optimal scaffold properties addressing the complexity of the desired tissue still need to be developed. The focus of this study lies in the development and evaluation of a conductive scaffold for bone tissue engineering. In this study PEDOT:PSS scaffolds were designed and evaluated in vitro using MC3T3-E1 osteogenic precursor cells, and the cells were assessed for distinct differentiation stages and the expression of an osteogenic phenotype. Ice-templated PEDOT:PSS scaffolds presented high pore interconnectivity with a median pore diameter of 53.6±5.9µm and a total pore surface area of 7.72±1.7m2·g-1. The electrical conductivity, based on I-V curves, was measured to be 140µS·cm-1 with a reduced, but stable conductivity of 6.1µS·cm-1 after 28days in cell culture media. MC3T3-E1 gene expression levels of ALPL, COL1A1 and RUNX2 were significantly enhanced after 4weeks, in line with increased extracellular matrix mineralisation, and osteocalcin deposition. These results demonstrate that a porous material, based purely on PEDOT:PSS, is suitable as a scaffold for bone tissue engineering and thus represents a promising candidate for regenerative medicine. STATEMENT OF SIGNIFICANCE: Tissue engineering approaches have been increasingly considered for the repair of non-union fractions, craniofacial reconstruction or large bone defect replacements. The design of complex biomaterials and successful engineering of 3-dimensional tissue constructs is of paramount importance to meet this clinical need. Conductive scaffolds, based on conjugated polymers, present interesting candidates to address the piezoelectric properties of bone tissue and to induce enhanced osteogenesis upon implantation. However, conductive scaffolds have not been investigated in vitro in great measure. To this end, we have developed a highly porous, electrically conductive scaffold based on PEDOT:PSS, and provide evidence that this purely synthetic material is a promising candidate for bone tissue engineering

Permeability and conductivity of platelet-reinforced membranes and composites

We present large scale simulations of the diffusion constant $D$ of a random composite consisting of aligned platelets with aspect ratio $a/b>>1$ in a matrix (with diffusion constant $D_0$) and find that $D/D_0 = 1/(1+ c_1 x + c_2 x^2)$, where $x= a v_f/b$ and $v_f$ is the platelet volume fraction. We demonstrate that for large aspect ratio platelets the pair term ($x^2$) dominates suggesting large property enhancements for these materials. However a small amount of face-to-face ordering of the platelets markedly degrades the efficiency of platelet reinforcement.Comment: RevTeX, 5 pages, 4 figures, submitted to PR

Fouling Release Nanostructured Coatings based on PDMS-polyurea Segmented Copolymers

http://www.elsevier.com/wps/find/journaldescription.cws_home/30466/description#descriptionThe bulk and surface characteristics of a series of coatings based on PDMS-polyurea segmented copolymers were correlated to their fouling release performance. Incorporation of polyurea segments to PDMS backbone gives rise to phase separation with the extensively hydrogen bonded hard domains creating an interconnected network that imparts mechanical rigidity. Increasing the compositional complexity of the system by including fluorinated or POSS-functionalized chain extenders or through nanoclay intercalation, confers further thermomechanical improvements. In analogy to the bulk morphology, the surface toporgraphy also reflects the compositional complexity of the materials, displaying a wide range of motifs. Investigations on settlement and subsequent removal of Ulva sporelings on those nanostructured surfaces indicate that the work required to remove the microorganisms is significantly lower compared to coatings based on standard PDMS homopolymer. All in all, the series of materials considered in this study demonstrate advanced fouling release properties, while exhibiting superior mechanical properties and thus, long term durability. (C) 2010 Elsevier Ltd. All rights reserved.This publication is based on work supported by the Office of Naval Research. This publication is also based on work supported in part by Award No. KUS-C1-018-02, made by King Abdullah University of Science and Technology (KAUST). We acknowledge facility support through the Cornell Center for Materials Research (CCMR) and the Nanobiotechnology Center (NBTC)

High efficiency nanocomposite sorbents for CO2 capture based on amine-functionalized mesoporous capsules

A novel high efficiency nanocomposite sorbent for CO2 capture has been developed based on oligomeric amine (polyethylenimine, PEI, and tetraethylenepentamine, TEPA) functionalized mesoporous silica capsules. The newly synthesized sorbents exhibit extraordinary capture capacity up to 7.9 mmol g-1 under simulated flue gas conditions (pre-humidified 10% CO2). The CO2 capture kinetics were found to be fast and reached 90% of the total capacities within the first few minutes. The effects of the mesoporous capsule features such as particle size and shell thickness on CO2 capture capacity were investigated. Larger particle size, higher interior void volume and thinner mesoporous shell thickness all improved the CO2 capacity of the sorbents. PEI impregnated sorbents showed good reversibility and stability during cyclic adsorption-regeneration tests (50 cycles)

Investigation on the competing effects of clay dispersion and matrix plasticisation for polypropylene/clay nanocomposites. Part I: morphology and mechanical properties

The key compatibiliser role of maleated polypropylene (MAPP) to improve the clay dispersability has been explicitly addressed in the fabrication process and material characterisation of polypropylene (PP)/clay nanocomposites. However, its matrix plasticiser role, which has been rarely mentioned, could adversely influence the excellent mechanical properties of such nanocomposites, resulting from the homogeneous clay dispersion. PP/clay nanocomposites in the presence of MAPP were prepared by twin screw extrusion and subsequently injection moulded with three typical material formulations in fixed parametric settings: (1) weight ratio (WR) of clay and MAPP, WR = 1:2; (2) MAPP content of 6 wt% and (3) clay content of 5 wt%. The morphological structures and mechanical properties of PP/clay nanocomposites were examined by using X-ray diffraction (XRD) analysis, transmission electron microscopy (TEM), scanning electron microscopy (SEM) and universal mechanical testing. The further improvement of mechanical properties was evidently hindered with very inconsiderable alteration of morphological structures in terms of the clay dispersion level. This observation could be ascribed to the change of MAPP role from a compatibiliser to a plasticiser because of its excessive amount used above a certain saturation level, which was found in the range of 3–6 wt% in MAPP contents for the enhancements of tensile and flexural properties of PP/clay nanocomposites