Development of a wind gust model to estimate gust speeds and their return periods

Spatially dense observations of gust speeds are necessary for various applications, but their availability is limited in space and time. This work presents an approach to help to overcome this problem. The main objective is the generation of synthetic wind gust velocities. With this aim, theoretical wind and gust distributions are estimated from 10 yr of hourly observations collected at 123 synoptic weather stations provided by the German Weather Service. As pre-processing, an exposure correction is applied on measurements of the mean wind velocity to reduce the influence of local urban and topographic effects. The wind gust model is built as a transfer function between distribution parameters of wind and gust velocities. The aim of this procedure is to estimate the parameters of gusts at stations where only wind speed data is available. These parameters can be used to generate synthetic gusts, which can improve the accuracy of return periods at test sites with a lack of observations. The second objective is to determine return periods much longer than the nominal length of the original time series by considering extreme value statistics. Estimates for both local maximum return periods and average return periods for single historical events are provided. The comparison of maximum and average return periods shows that even storms with short average return periods may lead to local wind gusts with return periods of several decades. Despite uncertainties caused by the short length of the observational records, the method leads to consistent results, enabling a wide range of possible applications

Nitrogen Oxides from Thunderstorms - Results from Experiments over Europe and the Continental Tropics

Deep convection causes thunderstorms with lightning. In this paper we summarise the nitrogen oxides results obtained from the recent measurements over Brazil within the experiment TROCCINOX and compare the results with the results from EULINOX and its predecessors LINOX, and INCA

Manufacturing technology for the fabrication a discrete actuator using a magnetic shape memory alloy

To demonstrate the feasibility of combining thin-film fabrication techniques and discrete MSM stripes, a hybrid actuator system was designed. The actuator system consists of four thin-film stators and two discrete MSM stripes mounted in a row. For creating an actuator motion, one of the MSM stripes has to be excited by a pair of stators to cause variant switching. This results in an elongation plus a compression of the second stripe and vice versa. The technologies required for fabricating the thin-film stator are sputter deposition, PECVD, electroplating, etching, and photolithography. This paper describes the fabrication process for a thin-film stator used for the MSM micro actuator system. It also presents technology study results indicating the feasibility of the planned fabrication sequence

The Role of Zinc Layer During Wetting of Aluminium on Zinc-coated Steel in Laser Brazing and Welding

AbstractThe zinc layer of zinc-coated steel is known to be a crucial factor for the spreading of liquid aluminium on the coated surface. For industrial brazing and welding processes these zinc-coatings enable a fluxless joining between aluminium and steel in many cases. Yet, the reason for the beneficial effect of the zinc to the wetting process is not completely understood. Fundamental investigations on the wetting behaviour of single aluminium droplets on different zinc-coated steel surfaces have revealed a distinct difference between coated surfaces at room temperature and at elevated temperature regarding the influence of different coating thicknesses.In this paper the case of continuous laser brazing and welding processes of aluminium and commercial galvanized zinc-coated steel sheets are presented. It is shown that in the case of bead-on-plate laser beam brazing, the coating thickness has a measureable effect on the resulting wetting angle and length but does not have a significant impact in case of overlap laser beam welding. This might be linked to different heat transfer conditions. The results also strongly indicate that proper initialbreakup of oxide layers is still required to accomplish good wetting on zinc-coated surfaces

Surgical site infection rate is lower in laparoscopic than open colorectal surgery.

OBJECTIVE: Few studies have investigated whether surgical site infection (SSI) incidence differs between laparoscopic colorectal surgery (LCS) and open colorectal surgery (OCS). This study investigated the SSI incidence using the validated UK SSI Surveillance Service (SSISS) criteria for diagnosing wound infections. METHOD: Prospective data collection recorded patients' demographics, operative details, antibiotic use, wound evaluation and microbiological wound culture results, for consecutive patients undergoing elective resectional LCS and OCS. Postdischarge surveillance consisted of patient questionnaires sent out at 30 days and the primary care communication. RESULTS: A total of 122 patients underwent colorectal resections over 1 year (LCS 43; OCS 79). Patients' demographics and operative case-mix were similar for both groups, including body mass index (BMI), diabetic and smoking status. Operative duration was longer in the LCS group compared with OCS group (P = 0.012, Mann-Whitney U-test), but hospital stay was shorter for LCS (P = 0.0001, Mann-Whitney U-test). The SSI rate was significantly lower in the LCS than OCS group (7%vs 25% respectively; P = 0.015, two-tailed Fisher's exact test). BMI > 30 and operation length > 4 h influenced the risk of SSI formation (P < 0.05, chi-squared test). One LCS patient required conversion to a limited laparotomy. CONCLUSIONS: Surgical site infection incidence is significantly lower following LCS when compared with OCS. Confounding factors in this study include patient selection for LCS and nonrandomization