Numerical and Experimental Analyses of Hybrid Composites Made from Amazonian Natural Fibers

The application of lignocellulosic fibers as reinforcements in composite materials has found increasing use in recent years, due to the attractive characteristics of natural fibers such as their low cost, high specific modulus, biodegradability, abundance and with many technical qualities. Natural fiber hybrid composites are very frequently used in automotive aerospace and other industries. In this work, numerical and experimental analysis is carried out to compare curauá, jute and sisal fibers in epoxy composites for use in industry. The most appropriate hybridization effect by establishing the amounts of each fiber on the mechanical properties was considered. Finite Element Models were designed and validated through mechanical tests. The number of Finite Element models and specimens performed was determined through the design of experiments using the Taguchi Method and then the results were statistically validated. Higher strength was obtained in composites made with curauá fiber, followed by jute and sisal fibers. Such behavior was achieved by FEM and experimental tests, revealing an increase in tensile strength by increasing the amount of fibers up to 35% in total. Higher strength was achieved when the composite was made with curauá (20 wt.%), jute (10 wt.%) and sisal (5 wt.%) fibers. The results show a good agreement between the FEM and the experimental tests. Furthermore, the results of the present study were compared with those obtained previously mentioned in the open literature