Synthesis and Luminescent Properties of Silicon Nanocrystals

Nowadays, study of silicon-based visible light-emitting devices has increased due to large-scale microelectronic integration. Since then different physical and chemical processes have been performed to convert bulk silicon (Si) into a light-emitting material. From discovery of Photoluminescence (PL) in porous Silicon by Canham, a new field of research was opened in optical properties of the Si nanocrystals (Si-NCs) embedded in a dielectric matrix, such as SRO (silicon-rich oxide) and SRN (silicon-rich nitride). In this respect, SRO films obtained by sputtering technique have proved to be an option for light-emitting capacitors (LECs). For the synthesis of SRO films, growth parameters should be considered; Si-excess, growth temperature and annealing temperature. Such parameters affect generation of radiative defects, distribution of Si-NCs and luminescent properties. In this chapter, we report synthesis, structural and luminescent properties of SRO monolayers and SRO/SiO2 multilayers (MLs) obtained by sputtering technique modifying Si-excess, thickness and thermal treatments

Porous Silicon Gas Sensors: The Role of the Layer Thickness and the Silicon Conductivity

We studied the influences of the thickness of the porous silicon layer and the conductivity type on the porous silicon sensors response when exposed to ethanol vapor. The response was determined at room temperature (27 ∘C) in darkness using a horizontal aluminum electrode pattern. The results indicated that the intensity of the response can be directly or inversely proportional to the thickness of the porous layer depending on the conductivity type of the semiconductor material. The response of the porous sensors was similar to the metal oxide sensors. The results can be used to appropriately select the conductivity of semiconductor materials and the thickness of the porous layer for the target gas

ZnO Films Incorporation Study on Macroporous Silicon Structure

In the present work, we developed hybrid nanostructures based on ZnO films deposited on macroporous silicon substrates using the sol–gel spin coating and ultrasonic spray pyrolysis (USP) techniques. The changes in the growth of ZnO films on macroporous silicon were studied using a UV-visible spectrometer, an X-ray diffractometer (XRD), scanning electron microscopy (SEM) and atomic force microscopy (AFM). XRD analysis revealed the beneficial influence of macroporous silicon on the structural properties of ZnO films. SEM micrographs showed the growth and coverage of ZnO granular and flake-like crystals inside the pores of the substrate. The root mean square roughness (RMS) measured by AFM in the ZnO grown on the macroporous silicon substrate was up to one order of magnitude higher than reference samples. These results prove that the methods used in this work are effective to cover porous and obtain nano-morphologies of ZnO. These morphologies could be useful for making highly sensitive gas sensors

Highly Visible Photoluminescence from Ta-Doped Structures of ZnO Films Grown by HFCVD

Tantalum-doped ZnO structures (ZnO:Ta) were synthesized, and some of their characteristics were studied. ZnO material was deposited on silicon substrates by using a hot filament chemical vapor deposition (HFCVD) reactor. The raw materials were a pellet made of a mixture of ZnO and Ta2O5 powders, and molecular hydrogen was used as a reactant gas. The percentage of tantalum varied from 0 to 500 mg by varying the percentages of tantalum oxide in the mixture of the pellet source, by holding a fixed amount of 500 mg of ZnO in all experiments. X-ray diffractograms confirmed the presence of zinc oxide in the wurtzite phase, and metallic zinc with a hexagonal structure, and no other phase was detected. Displacements to lower angles of reflection peaks, compared with those from samples without doping, were interpreted as the inclusion of the Ta atoms in the matrix of the ZnO. This fact was confirmed by energy dispersive X-ray spectrometry (EDS), and X-ray diffraction (XRD) measurements. From scanning electron microscopy (SEM) images from undoped samples, mostly micro-sized semi-spherical structures were seen, while doped samples displayed a trend to grow as nanocrystalline rods. The presence of tantalum during the synthesis affected the growth direction. Green photoluminescence was observed by the naked eye when Ta-doped samples were illuminated by ultraviolet radiation and confirmed by photoluminescence (PL) spectra. The PL intensity on the Ta-doped ZnO increased from those undoped samples up to eight times

Effect of the Deposit Temperature of ZnO Doped with Ni by HFCVD

The effect of the deposit temperature of zinc oxide (ZnO) doped with nickel (Ni) by hot filament chemical vapor deposition (HFCVD) technique is reported in this work. The technique allows depositing ZnO:Ni in short intervals (1 min). A deposit of undoped ZnO is used as a reference sample. The reference sample was deposited at 500 °C. The ZnO:Ni samples were deposited at 500 °C, 400 °C, 350 °C, and 300 °C. The samples were studied using structural, morphological, and optical characterization techniques. The Ni incorporation to the ZnO lattice was verified by the shift of the X-ray diffraction peaks, the Raman peaks, the band gap, and the photoluminescence measurements. It was found that the deposit temperature affects the structural, morphological, and optical properties of the ZnO:Ni samples too. The structure of the ZnO:Ni samples corresponds to the hexagonal structure. Different microstructures shapes such as spheres, sea urchins, and agglomerate were found in samples; their change is attributed to the deposit temperature variation. The intensity of the photoluminescence of the ZnO:Ni improves concerning the ZnO due to the Ni incorporation, but it decreases as the deposit temperature decreases

Influence of the Incorporation of Nd in ZnO Films Grown by the HFCVD Technique to Enhance Photoluminiscence Due to Defects

In this work, optical–structural and morphological behavior when Nd is incorporated into ZnO is studied. ZnO and Nd-doped ZnO (ZnO-Nd) films were deposited at 900 °C on Silicon n-type substrates (100) by using the Hot Filament Chemical Vapor Deposition (HFCVD) technique. For this, pellets were made by from powders of ZnO(s) and a mixture of ZnO(s):Nd(OH)3(s). The weight percent of the mixture ZnO:Nd(OH)3 in the pellet is 1:3. The gaseous precursor generation was carried out by chemical decomposition of the pellets using atomic hydrogen which was produced by a tungsten filament at 2000 °C. For the ZnO film, diffraction planes (100), (002), (101), (102), (110), and (103) were found by XRD. For the ZnO-Nd film, its planes are displaced, indicating the incorporation of Nd into the ZnO. EDS was used to confirm the Nd in the ZnO-Nd film with an atomic concentration (at%) of Nd = 10.79. An improvement in photoluminescence is observed for the ZnO-Nd film; this improvement is attributed to an increase in oxygen vacancies due to the presence of Nd. The important thing about this study is that by the HFCVD method, ZnO-Nd films can be obtained easily and with very short times; in addition, some oxide compounds can be obtained individually as initial precursors, which reduces the cost compared to other techniques. Something interesting is that the incorporation of Nd into ZnO by this method has not yet been studied, and depending on the method used, the PL of ZnO with Nd can increase or decrease, and by the HFCVD method the PL of the ZnO film, when Nd is incorporated, increases more than 15 times compared to the ZnO film

Spectroscopic Properties of Si-nc in SiOx Films Using HFCVD

In the present work, non-stoichiometric silicon oxide films (SiOx) deposited using a hot filament chemical vapor deposition technique at short time and simple parameters of depositions are reported. This is motivated by the numerous potential applications of SiOx films in areas such as optoelectronics. SiOx films were characterized with different spectroscopic techniques. The deposited films have interesting characteristics such as the presence of silicon nanoclusters without applying thermal annealing, in addition to a strong photoluminescence after applying thermal annealing in the vicinity of 1.5 eV, which may be attributed to the presence of small, oxidized silicon grains (less than 2 nm) or silicon nanocrystals (Si-nc). An interesting correlation was found between oxygen content, the presence of hydrogen, and the formation of defects in the material, with parameters such as the band gap and the Urbach energies. This correlation is interesting in the development of band gap engineering for this material for applications in photonic devices

Spectroscopic and Microscopic Correlation of SRO-HFCVD Films on Quartz and Silicon

This work is focused on making a correlation between results obtained by using spectroscopy and microscopy techniques from single and twofold-layer Silicon-Rich Oxide (SRO) films. SRO films single-layer and twofold-layer characterizations were compared considering the conditions as-grown and with thermal treatment at 1100 °C for 60 min in a nitrogen atmosphere. The thickness of the single-layer film is 324.7 nm while for the twofold-layer film it is 613.2 nm; after heat-treated, both thicknesses decreased until 28.8 nm. X-ray Photoelectron Spectroscopy shows changes in the excess-silicon in single-layer SRO films, with 10% in as-grown films and decreases to 5% for the heat-treated films. Fourier Transform Infrared Spectroscopy (FTIR) exhibits three characteristic vibrational modes of SiO2, as well as, the vibrating modes associated with the Si-H bonds, which disappear after the heat treatment. With UV–Vis spectroscopy results we obtained the absorbance and the absorption coefficient for the SRO films in order to calculate the optical bandgap energy (Egopt), which increased with heat-treatment. The energy peaks of the photoluminescence spectra were used to calculate the silicon nanocrystal size, obtaining thus an average size of 1.89 ± 0.32 nm for the as-grown layer, decreasing the size to 1.64 ± 0.01 nm with the thermal treatment. On the other hand, scanning electron microscopy and high-resolution transmission electron microscopy images confirm the thickness of the twofold-layer SRO films as 628 nm for the as-grown layer and 540 nm for the layer with heat-treatment, and the silicon nanocrystal size of 2.3 ± 0.6 nm for the films with thermal treatment

MIS-Like Structures with Silicon-Rich Oxide Films Obtained by HFCVD: Their Response as Photodetectors

MIS-type structures composed of silicon-rich oxide (SRO), thin films deposited by hot filament chemical vapor deposition (HFCVD), show interesting I-V and I-t properties under white light illumination and a response as photodetectors. From electrical measurements, it was found that at a reverse bias of −4 V, the illumination current increased by up to three orders of magnitude relative to the dark current, which was about 82 nA, while the photogenerated current reached a value of 25 μA. The reported MIS structure with SRO as the dielectric layer exhibited a hopping conduction mechanism, and an ohmic conduction mechanism was found with low voltage. I-t measurements confirmed the increased photogenerated current. Furthermore, the MIS structure, characterized by current-wavelength (I-λ) measurements, exhibited a maximum responsivity value at 254 mA/W, specific detectivity (D*) at 2.21 × 1011 cm Hz1/2 W−1, and a noise equivalent power (NEP) of 49 pW at a wavelength of 535 nm. The structure exhibited good switching behavior, with rise and fall times between 120 and 150 ms, respectively. These rise and decay times explain the generation and recombination of charge carriers and the trapping and release of traps, respectively. These results make MIS-type structures useful as photodetectors in the 420 to 590 nm range

Effect of the Gaseous Atmosphere in GaAs Films Grown by Close-Spaced Vapor Transport Technique

The effect of the gaseous atmosphere in the growth of gallium arsenide (GaAs) films was studied. The films have been grown by close-spaced vapor transport (CSVT) technique in a home-made hot filament chemical vapor deposition (HFCVD) reactor using molecular hydrogen and molecular nitrogen as the transport agent. An important point about the gaseous atmosphere is the ease in creating volatile compounds when it makes contact with the GaAs source, this favors the transport of material in a CSVT system. Chemical reactions are proposed in order to understand the significant difference produced from the gaseous atmosphere. The films grown with hydrogen are (almost) continuous and have homogeneous layers with preferential orientation (111). The films grown with nitrogen are granular and rough layers with the coexistence of the orientations (111), (220) and (311) in the crystals. The incorporation of impurities in the films was corroborated by energy dispersive spectroscopy (EDS) showing traces of oxygen and nitrogen for the case of the samples obtained with nitrogen. Films grown in a hydrogen atmosphere show a higher band gap than those grown in a nitrogen atmosphere. With the results of XRD and micro-Raman we observe a displacement and broadening of the peaks, characteristic of a structural disorder. The calculations of the FWHM allow us to observe the crystallinity degree and determine an approximate crystallite size using the Scherrer’s equation