6 research outputs found
Experimental Research on the Mechanical Performance of the Bolted Rock under Lateral Impact Load: Effect of Prestress, Body Material, and Anchorage Style
In order to reveal the impact mechanical properties and their key influencing factors of the bolted rock under the lateral impact load, through the lateral drop hammer impact test, the time-history curve of impact force, axial force of the bolt, and surface strain of the sample under different combination types of influencing factors is obtained, and the whole process of deformation and failure of the bolted rock is recorded. The test results show that the material of the bolt has a significant influence on the impact force and axial force of the bolt. There is a positive correlation between bolt strength and impact peak and impact attenuation slope and a negative correlation between bolt strength and impact action time. The effect of prestress on the impact resistance of the bolted rock was also evaluated by the test which suggested that prestress of the bolt can significantly reduce both impact time and bolt axial force of the bolted rock but has limited effect on the impact force. It was also found that the time-history curve of the impact force of anchoring rock mass had significant difference with full-length anchoring and nonanchoring. Compared with the nonanchoring bolt, the full-length anchored rock mass has a larger impact peak and shorter action time, which means that the impact resistance of the full-length bolted rock has a certain degree of weakening. Through scientific research, determining the reasonable bolt material, prestress value, and anchorage style can improve the impact resistance of the sample
Pullout Test on Fully Grouted Bolt Sheathed by Different Length of Segmented Steel Tubes
In order to evaluate the anchorage performance of rebar bolt sheathed by different length of segmented steel tubes, a total of eight groups of pullout tests were conducted in this study. The steel tubes, segmented by 5 cm, 7 cm, 9 cm, 10 cm, and 15 cm, utilized in current study were bonded together by a high performance two-component adhesive to form standard 30 cm long steel tube. Unlike axial stress distribution in bolt, the axial stress distribution in steel tube showed exponential decrease trend from tube-clamp end to bolt-clamp end; thus a series of interesting results were observed. For instance, the sequence for segments detachment had its specific order of priority; the failure form of bolting system, the load oscillation characteristics, and the final displacement were highly determined by the length of the last segment, namely, the one fixed by clamp of testing machine. Moreover, the load-displacement relationship for some particular samples was further investigated from the perspective of energy transformation, and the disequilibrium extension of interfacial decoupling was also discussed. This paper, from a relatively idealized perspective, presents a laboratorial solution to interpret the mechanical performance of the bolt installed in layered strata; so far at least it demonstrates that a bolt installed in comparatively thicker layer of strata can last more durable and stable
Grouting Reinforcement Technique in Wind Oxidation Zone by Power Law Superfine Cement Slurry Considering the Time-Varying Rheological Parameters
Mechanism for Controlling Floor Heave of Mining Roadways Using Reinforcing Roof and Sidewalls in Underground Coal Mine
Controlling floor heave plays an important role in the stability of mining roadways that is pivotal to the sustainable, safe, and efficient development of coal resources in underground coal mines. In order to propose highly efficient and economical methods of controlling floor heave, numerical simulation, laboratory physical simulation, and engineering practice were carried out to reveal the mechanism of reinforcing roof and sidewalls to control the floor heave of the mining roadway, return airway 15208, in the Xinjing Coal Mine in the Yanquan mining area of China. The numerical simulation demonstrated that the surrounding rock of the roadway underwent expansion and deformation, accompanied by redistribution of the surrounding rock stress due to the reinforcement of the roof and two sidewalls. The laboratory physical simulation revealed that the reinforcing roof and sidewalls decreased the bed separation of the floor and reduced the quantity of the displacement of the floor in Coal Seam 15. Engineering practice showed that the floor heave in the roadway, the roof, and the sidewalls, which was reinforced by intensive bolts combined with steel belt, wire mesh, and cable, was significantly reduced compared with that with lower supporting intensity of roof and sidewalls. The floor heave could be successfully controlled