4,170 research outputs found
A Multi-Kernel Multi-Code Polar Decoder Architecture
Polar codes have received increasing attention in the past decade, and have
been selected for the next generation of wireless communication standard. Most
research on polar codes has focused on codes constructed from a
polarization matrix, called binary kernel: codes constructed from binary
kernels have code lengths that are bound to powers of . A few recent works
have proposed construction methods based on multiple kernels of different
dimensions, not only binary ones, allowing code lengths different from powers
of . In this work, we design and implement the first multi-kernel successive
cancellation polar code decoder in literature. It can decode any code
constructed with binary and ternary kernels: the architecture, sized for a
maximum code length , is fully flexible in terms of code length, code
rate and kernel sequence. The decoder can achieve frequency of more than
GHz in nm CMOS technology, and a throughput of Mb/s. The area
occupation ranges between mm for and mm for
. Implementation results show an unprecedented degree of
flexibility: with , up to code lengths can be decoded with
the same hardware, along with any kernel sequence and code rate
ISR corrections to associated production at future Higgs factories
We evaluate the QED corrections due to initial state radiation (ISR) to
associated Higgs boson production in electron-positron () annihilation
at typical energies of interest for the measurement of the Higgs properties at
future colliders, such as CEPC and FCC-ee. We apply the QED Structure
Function approach to the four-fermion production process , including both signal and background contributions. We
emphasize the relevance of the ISR corrections particularly near threshold and
show that finite third order collinear contributions are mandatory to meet the
expected experimental accuracy. We analyze in turn the r\^ole played by a full
four-fermion calculation and beam energy spread in precision calculations for
Higgs physics at future colliders.Comment: 11 pages, 3 figure
Some remarks on single- and double-porosity modeling of coupled chemo-hydro-mechanical processes in clays
Active clays are known to possess an aggregated structure, which justifies the use of double-porosity models to reproduce their behavior. Simulation of chemo-mechanical processes requires instead the introduction of a relevant number of coupled mechanical and transport laws. It follows that double porosity models for coupled chemo-hydro-mechanical require a relevant number of parameters, which are twice those needed by single porosity models. The aim of this work is to evaluate the consequences of using single- and double-porosity frameworks to simulate the transient chemo-mechanical processes in active clays, showing how models based on simple microstructural considerations can help in performing simulations which are a reasonable trade-off between simplicity and accuracy. In particular with single porosity models, it might be necessary introducing parameters having a doubtful meaning to describe adsorption-desorption processes. This type of assumption is not required by double porosity models. While for compacted clays these conclusions are corroborated with microstructural observations, the same hold also when reproducing the behavior of an active clay at a remolded condition. In this latter case the delay of swelling with respect to desalinization, typical of remolded conditions, was satisfactorily reproduced only with double porosity models
European Information System for Organic Markets (EISFOM QLK5-2002-02400): WP 2: âData collection and processing systems (DCPS) for the conventional marketsâ and WP 3: âData collection and processing systems for organic marketsâ = Deliverable D2
European markets for organic products are developing fast. In Europe, as other parts of the world, more and more farm land is being converted to organic production. In order to adjust production and consumption levels, detailed market information is needed, especially where decisions with a long-term impact need to be taken, for example on converting specific land or livestock enterprises requiring high levels of investment in glasshouses, housing, processing facilities etc. Since public subsidies (regional / national / European) are heavily involved in these investments, valid, accurate and up-to-date information is essential not only for farmers and growers, but also for policy-makers, consultants, processing industry etc.
EU-research projects such as OFCAP (FAIR3-CT96-1794) and OMIaRD (QLK5-2000-01124) have shown that regional or national data gathering takes place in many countries, but often only very basic data are reported, such as certified organic holdings, land areas and livestock numbers. Important market data, e.g. the amount of production, consumption, international trade or producer and consumer prices, do not exist in most European countries. In some European countries there are only rough estimates of the levels of production and consumption. There is no standardization and data are seldom comparable. Furthermore, detailed information on specific commodities is missing. Hence, investment decisions are taken under conditions of great uncertainty. Likewise, if politicians want to support organic agriculture, they do not know whether it would be better to support production or consumption or to address problems in the marketing channel.
The EU concerted action EISfOM (QLK5-2002-02400) (European Information System for Organic Markets) is attempting to take the first steps in solving these problems. The aim of this concerted action is to build up a framework for reporting valid and reliable data for relevant production and market sectors of the European organic sector in order to meet the needs of policy-makers, farmers, processors, wholesalers and other actors involved in organic markets.
In order to reach this aim, this action was split into several workpackages. This report describes the approach and results of workpackages 2 and 3.
In this first chapter the objective and general approach of these work packages are described.
Chapters 2 and 3 provide an overview of international statistics and data collection systems within the food supply chain at the public and the private level. Chapter 4 describes national statistics and data collection systems within the food supply chain.
In Chapter 5, an analysis and appraisal is made of the results with regard to organic data collection and processing systems (DCPSs) and their integration into existing common DCPSs. Chapter 6 draws several general conclusions.
Two substantial annexes complete the report, one with the country reports on the situation of data collection and processing in all investigated countries and the other with the first and the second stage questionnaires covering the different data collection levels
Combined lung and brain ultrasonography for an individualized âbrain-protective ventilation strategyâ in neurocritical care patients with challenging ventilation needs
When intracranial hypertension and severe lung damage coexist in the same clinical scenario, their management poses a difficult challenge, especially as concerns mechanical ventilation management. The needs of combined lung and brain protection from secondary damage may conflict, as ventilation strategies commonly used in patients with ARDS are potentially associated with an increased risk of intracranial hypertension. In particular, the use of positive end-expiratory pressure, recruitment maneuvers, prone positioning, and protective lung ventilation can have undesirable effects on cerebral physiology: they may positively or negatively affect intracranial pressure, based on the final repercussions on PaO2and cerebral perfusion pressure (through changes in cardiac output, mean arterial pressure, venous return, PaO2and PaCO2), also according to the baseline conditions of cerebral autoregulation. Lung ultrasound (LUS) and brain ultrasound (BUS, as a combination of optic nerve sheath diameter assessment and cerebrovascular Doppler ultrasound) have independently proven their potential in respectively monitoring lung aeration and brain physiology at the bedside. In this narrative review, we describe how the combined use of LUS and BUS on neurocritical patients with demanding mechanical ventilation needs can contribute to ventilation management, with the aim of a tailored âbrain-protective ventilation strategy.
A reactive transport model for calcite-rich caprocks in the context of geological carbon storage
Antipsychotic Polypharmacy and High-Dose Antipsychotic Regimens in the Residential Italian Forensic Psychiatric Population (REMS)
Few data exist regarding treatment with antipsychotics in forensic psychiatric patient
populations with high social dangerousness. We performed a secondary analysis of 681
patients treated with at least one antipsychotic, extracted from a 1-year observational
retrospective study, conducted on 730 patients treated in the Italian Residencies
for Execution of Security Measures (REMS) (96.4% of the REMS population). We
aimed at investigating antipsychotic polypharmacy (prescription of two or more
concomitant antipsychotics) and high dose/very high-dose antipsychotics, as well as
the possible factors associated with such therapeutic regimens. High dose/very highdose
antipsychotics were defined as a prescribed daily dose to WHO-defined daily
dose ratio greater than 1.5 or 3.0, respectively. Binary logistic regression analysis
was used in three models to test possible predictors of antipsychotic polypharmacy,
high-dose antipsychotics, and very high-dose antipsychotic prescription. Antipsychotic
polypharmacy resulted in n = 308 (45.2%) of the patients, n = 346 (50.8%) received
high-dose antipsychotics, and n = 96 (14.1%) very high-dose antipsychotics. The
multivariate analysis disclosed an association between antipsychotic polypharmacy and
male gender (odds ratio (OR): 2.75 and 95% CI: 1.34â5.65), long-acting injectable
(LAI) antipsychotic prescription (OR: 2.62 and 95% CI: 1.84â3.74), and aggressive
behavior in REMS (OR: 1.63 and 95% CI: 1.13â2.36). High-dose antipsychotics were
also associated with male gender (OR: 2.01 and 95% CI: 1.02â3.95), LAI antipsychotic
prescription (OR: 2.78 and 95% CI: 1.95â3.97), and aggressive behavior in REMS
(OR: 1.63 and 95% CI: 1.12â2.36). The use of antipsychotic polypharmacy and highdose
antipsychotics is frequent in the REMS population. These results might depend
on regulatory and organizational aspects of the REMS system, including variability in
structures, lack of a common model of care, and lack of stratified therapeutic security
Diagnosis of diastolic dysfunction in the emergency department: really at reach for minimally trained sonologists? A call for a wise approach to heart failure with preserved ejection fraction diagnosis in the ER
- âŠ