Search for supersymmetric particles in scenarios with a gravitino LSP and stau NLSP

Sleptons, neutralinos and charginos were searched for in the context of scenarios where the lightest supersymmetric particle is the gravitino. It was assumed that the stau is the next-to-lightest supersymmetric particle. Data collected with the DELPHI detector at a centre-of-mass energy near 189 GeV were analysed combining the methods developed in previous searches at lower energies. No evidence for the production of these supersymmetric particles was found. Hence, limits were derived at 95% confidence level.Comment: 31 pages, 14 figure

A next generation, pilot-scale continuous sterilization system for fermentation media

A new continuous sterilization system was designed, constructed, started up, and qualified for media sterilization for secondary metabolite cultivations, bioconversions, and enzyme production. An existing Honeywell Total Distributed Control 3000-based control system was extended using redundant High performance Process Manager controllers for 98 I/O (input/output) points. This new equipment was retrofitted into an industrial research fermentation pilot plant, designed and constructed in the early 1980s. Design strategies of this new continuous sterilizer system and the expanded control system are described and compared with the literature (including dairy and bio-waste inactivation applications) and the weaknesses of the prior installation for expected effectiveness. In addition, the reasoning behind selection of some of these improved features has been incorporated. Examples of enhancements adopted include sanitary heat exchanger (HEX) design, incorporation of a “flash” cooling HEX, on-line calculation of F(o) and R(o), and use of field I/O modules located near the vessel to permit low-cost addition of new instrumentation. Sterilizer performance also was characterized over the expected range of operating conditions. Differences between design and observed temperature, pressure, and other profiles were quantified and investigated

Risky business: factor analysis of survey data – assessing the probability of incorrect dimensionalisation

This paper undertakes a systematic assessment of the extent to which factor analysis the correct number of latent dimensions (factors) when applied to ordered categorical survey items (so-called Likert items). We simulate 2400 data sets of uni-dimensional Likert items that vary systematically over a range of conditions such as the underlying population distribution, the number of items, the level of random error, and characteristics of items and item-sets. Each of these datasets is factor analysed in a variety of ways that are frequently used in the extant literature, or that are recommended in current methodological texts. These include exploratory factor retention heuristics such as Kaiser’s criterion, Parallel Analysis and a non-graphical scree test, and (for exploratory and confirmatory analyses) evaluations of model fit. These analyses are conducted on the basis of Pearson and polychoric correlations.We find that, irrespective of the particular mode of analysis, factor analysis applied to ordered-categorical survey data very often leads to over-dimensionalisation. The magnitude of this risk depends on the specific way in which factor analysis is conducted, the number of items, the properties of the set of items, and the underlying population distribution. The paper concludes with a discussion of the consequences of overdimensionalisation, and a brief mention of alternative modes of analysis that are much less prone to such problems

Study of B0_s anti-B0_s oscillations and B0_s lifetimes using hadronic decays of B0_s mesons

Oscillations of B0s mesons have been studied in samples selected from about 3.5 million hadronic Z decays detected by DELPHI between 1992 and 1995. One analysis uses events in the exclusive decay channels: B0s -> Ds- pi+ or Ds- a1+ and B0s -> anti-D0 K- pi+ or anti-D0 K- a1+, where the D decays are completely reconstructed. In addition, B0s anti-B0s oscillations have been studied in events with an exclusively reconstructed Ds accompanied in the same hemisphere by a high momentum hadron of opposite charge. Combining the two analyses, a limit on the mass difference between the physical B0s states has been obtained: Delta(m_B0s) > 4.0 ps^{-1} at the 95% C.L. with a sensitivity of Delta(m_B0s) = 3.2 ps^{-1}. Using the latter sample of events, the B0s lifetime has been measured and an upper limit on the decay width difference between the two physical B0s states has been obtained: tau(B0s) = 1.53^{+0.16}_{-0.15}(stat.) +/- {0.07}(syst.) ps \Delta\Gamma(B0s)/\Gamma(B0s) < 0.69 at the 95% C.L. The combination of these results with those obtained using Ds+- lepton-+ sample gives: Delta(m_B0s) > 4.9 ps^{-1} at the 95% C.L. with a sensitivity of Delta(m_B0s) = 8.7 ps^{-1}. tau(B0s) = 1.46 +/- 0.11 ps and \Delta\Gamma(B0s)/\Gamma(B0s) < 0.45 at the 95% C.L.Comment: 42 pages, 13 figure

A comprehensive overview of radioguided surgery using gamma detection probe technology

The concept of radioguided surgery, which was first developed some 60 years ago, involves the use of a radiation detection probe system for the intraoperative detection of radionuclides. The use of gamma detection probe technology in radioguided surgery has tremendously expanded and has evolved into what is now considered an established discipline within the practice of surgery, revolutionizing the surgical management of many malignancies, including breast cancer, melanoma, and colorectal cancer, as well as the surgical management of parathyroid disease. The impact of radioguided surgery on the surgical management of cancer patients includes providing vital and real-time information to the surgeon regarding the location and extent of disease, as well as regarding the assessment of surgical resection margins. Additionally, it has allowed the surgeon to minimize the surgical invasiveness of many diagnostic and therapeutic procedures, while still maintaining maximum benefit to the cancer patient. In the current review, we have attempted to comprehensively evaluate the history, technical aspects, and clinical applications of radioguided surgery using gamma detection probe technology

International Consensus Statement on Rhinology and Allergy: Rhinosinusitis

Background: The 5 years since the publication of the first International Consensus Statement on Allergy and Rhinology: Rhinosinusitis (ICAR‐RS) has witnessed foundational progress in our understanding and treatment of rhinologic disease. These advances are reflected within the more than 40 new topics covered within the ICAR‐RS‐2021 as well as updates to the original 140 topics. This executive summary consolidates the evidence‐based findings of the document. Methods: ICAR‐RS presents over 180 topics in the forms of evidence‐based reviews with recommendations (EBRRs), evidence‐based reviews, and literature reviews. The highest grade structured recommendations of the EBRR sections are summarized in this executive summary. Results: ICAR‐RS‐2021 covers 22 topics regarding the medical management of RS, which are grade A/B and are presented in the executive summary. Additionally, 4 topics regarding the surgical management of RS are grade A/B and are presented in the executive summary. Finally, a comprehensive evidence‐based management algorithm is provided. Conclusion: This ICAR‐RS‐2021 executive summary provides a compilation of the evidence‐based recommendations for medical and surgical treatment of the most common forms of RS

Nomenclature for engineered bamboo

In recent years, there has been a rapid rise in the development of engineered bamboo materials, which have the potential to play an important role as alternatives to conventional building materials. Despite the growing diversity of bamboo products available on the market, the international standardization of both bamboo products and their constituent elements is limited, and a lack of universal nomenclature is recognized as one of the main constraints on developing standards. Similar or identical terminology is used interchangeably to describe different bamboo elements, processes, or products across sectors and continents. In some cases, translated colloquial names are misleading and scientifically inaccurate, which forms a barrier to global collaboration and research, creates ambiguity, and potentially limits trade. The present work aims to address this gap by proposing a set of appropriate terms in English that accurately describe and differentiate between currently produced engineered bamboo products and their constituent elements, accompanied by parallel terms in Chinese and Spanish. From these, new categories of engineered bamboo building materials are proposed for the Harmonized System of product codes. This paper highlights current ambiguities and provides terminology together with clear definitions of the main primary elements, processing steps, and products

Nomenclature for engineered bamboo

In recent years, there has been a rapid rise in the development of engineered bamboo materials, which have the potential to play an important role as alternatives to conventional building materials. Despite the growing diversity of bamboo products available on the market, the international standardization of both bamboo products and their constituent elements is limited, and a lack of universal nomenclature is recognized as one of the main constraints on developing standards. Similar or identical terminology is used interchangeably to describe different bamboo elements, processes, or products across sectors and continents. In some cases, translated colloquial names are misleading and scientifically inaccurate, which forms a barrier to global collaboration and research, creates ambiguity, and potentially limits trade. The present work aims to address this gap by proposing a set of appropriate terms in English that accurately describe and differentiate between currently produced engineered bamboo products and their constituent elements, accompanied by parallel terms in Chinese and Spanish. From these, new categories of engineered bamboo building materials are proposed for the Harmonized System of product codes. This paper highlights current ambiguities and provides terminology together with clear definitions of the main primary elements, processing steps, and products.</jats:p