22 research outputs found

    Time dependent viscoelastic rheological response of pure, modified and synthetic bituminous binders

    Get PDF
    Bitumen is a viscoelastic material that exhibits both elastic and viscous components of response and displays both a temperature and time dependent relationship between applied stresses and resultant strains. In addition, as bitumen is responsible for the viscoelastic behaviour of all bituminous materials, it plays a dominant role in defining many of the aspects of asphalt road performance, such as strength and stiffness, permanent deformation and cracking. Although conventional bituminous materials perform satisfactorily in most highway pavement applications, there are situations that require the modification of the binder to enhance the properties of existing asphalt material. The best known form of modification is by means of polymer modification, traditionally used to improve the temperature and time susceptibility of bitumen. Tyre rubber modification is another form using recycled crumb tyre rubber to alter the properties of conventional bitumen. In addition, alternative binders (synthetic polymeric binders as well as renewable, environmental-friendly bio-binders) have entered the bitumen market over the last few years due to concerns over the continued availability of bitumen from current crudes and refinery processes. This paper provides a detailed rheological assessment, under both temperature and time regimes, of a range of conventional, modified and alternative binders in terms of the materials dynamic (oscillatory) viscoelastic response. The rheological results show the improved viscoelastic properties of polymer- and rubber-modified binders in terms of increased complex shear modulus and elastic response, particularly at high temperatures and low frequencies. The synthetic binders were found to demonstrate complex rheological behaviour relative to that seen for conventional bituminous binders

    Mechanical and structural assessment of laboratory- and field-compacted asphalt mixtures

    Get PDF
    Compaction forms an integral part in the formation of the aggregate orientation and structure of an asphalt mixture and therefore has a profound influence on its final volumetric and mechanical performance. This article describes the influence of various forms of laboratory (gyratory, vibratory and slab-roller) and field compaction on the internal structure of asphalt specimens and subsequently on their mechanical properties, particularly stiffness and permanent deformation. A 2D image capturing and image analysis system has been used together with alternative specimen sizes and orientations to quantify the internal aggregate structure (orientation and segregation) for a range of typically used continuously graded asphalt mixtures. The results show that in terms of aggregate orientation, slab-compacted specimens tend to mimic field compaction better than gyratory and vibratory compaction. The mechanical properties of slab-compacted specimens also tend to be closer to that of field cores. However, the results also show that through careful selection of specimen size, specimen orientation and compaction variables, even mould-based compaction methods can be utilised with particular asphalt mixtures to represent field-compacted asphalt mixtures

    Moisture susceptibility of high and low compaction dry process crumb rubber modified asphalt mixtures

    Get PDF
    The field performance of dry process crumb rubber-modified (CRM) asphalt mixtures has been reported to be inconsistent with stripping and premature cracking on the surfacing. One of the concerns is that, because achieving field compaction of CRM material is difficult due to the inherent resilient nature of the rubber particle, nonuniform field compaction may lead to a deficient bond between rubber and bitumen. To assess the influence of compaction, a series of CRM and control mixtures was produced and compacted at two levels: 4% (low, optimum laboratory compaction) and 8% (high, field experience) air void content. The long-term durability, in regard to moisture susceptibility of the mixtures, was assessed by conducting repeated moisture conditioning cycles. Mechanical properties (stiffness, fatigue, and resistance to permanent deformation) were determined in the Nottingham Asphalt Tester. Results indicated that compared with conventional mixtures, the CRM mixtures, regardless of compaction effort, are more susceptible to moisture with the degree of susceptibility primarily depending on the amount of rubber in the mixture, rather than the difference in compaction. This behavior is different from that of conventional mixtures in which, as expected, poorly compacted mixtures were found to be more susceptible to moisture than were well-compacted mixtures

    Moisture damage assessment using surface energy, bitumen stripping and the SATS moisture conditioning procedure

    Get PDF
    Durability is one of the most important properties of an asphalt mixture. A key factor affecting the durability of asphalt pavements is moisture damage. Moisture damage generally results in the loss of strength of the mixture due to two main mechanisms; the loss of adhesion between bitumen and aggregate and the loss of cohesion within the mixture. Conventional test methods for evaluating moisture damage include tests conducted on loose bitumen-coated aggregates and those conducted on compacted asphalt mixtures. The former test methods are simpler and less expensive to conduct but are qualitative/subjective in nature and do not consider cohesive failure while the latter, though more quantitative, are based on bulky mechanical test set-ups and therefore require expensive equipment. Both test methods are, however, empirical in nature thus requiring extensive experience to interpret/use their results. The rolling bottle test (RBT) (EN 12697-11) for loose aggregate mixtures and the saturation ageing tensile stiffness (SATS) test (EN 12697-45) for compacted asphalt mixtures are two such methods, which experience suggests, could clearly discriminate between ‘good’ and ‘poor’ performing mixtures in the laboratory. A more fundamental approach based on surface energy (SE) measurements offers promise to better understand moisture damage. This article looks at results from the rolling bottle and the SATS tests in an attempt to better understand the underlying processes and mechanisms of moisture damage with the help of SE measurements on the constituent bitumen and aggregates. For this work, a set of bitumens and typical acidic and basic aggregate types (granite and limestone) were selected. Combinations of these materials were assessed using both the rolling bottle and SATS tests. The SE properties of the binders were measured using a dynamic contact angle Analyser and those of the aggregates using a dynamic vapour sorption device. From these SE measurements it was possible to predict the relative performance of both the simple RBT and the more complicated SATS test. Mineralogical composition of the aggregates determined using a mineral liberation analyser was used to explain the differences in performance of the mixtures considered

    Rheological characteristics of polymer modified and aged bitumens

    Get PDF
    SIGLEAvailable from British Library Document Supply Centre-DSC:DXN013828 / BLDSC - British Library Document Supply CentreGBUnited Kingdo

    The 2S2P1D - An Excellent Linear Viscoelastic Model

    Get PDF
    An experimental campaign has been carried out on five different unaged and five aged penetration grade bitumens to determine the properties of the 2S2P1D (combinations of two springs, two parabolic elements and one dashpot) model. The dynamic oscillatory test was conducted in order to obtain the rheological data using the dynamic shear rheomater (DSR

    Binder design of high RAP content hot and warm asphalt mixture wearing courses

    Get PDF
    Reclaimed Asphalt Pavement (RAP) has shown great potential for being used in the construction or maintenance of roads. However, RAP is usually downgraded to lower pavement layers and the percentage of RAP used in wearing courses is still moderate ( 6430%). The research and results contained in this paper focus on the definition of binder recipes aimed at increasing the percentage of RAP in hot and warm mix asphalt wearing courses. A review of current internationally used blend design methodologies is presented followed by case studies aimed at defining binder recipes for high RAP content asphalt mixture wearing courses to be further used for mix design and production in asphalt plants. Binder design has been carried out by means of rotational viscosity, Dynamic Shear Rheometer, Bending Beam Rheometer and conventional experimental tests with results showing that the amount of RAP used in a mix can be increased through the development of an accurate binder design and the selection of an appropriate rejuvenator. As a result, laboratory design showed that using up to 90% of RAP is a feasible option. However, the percentage of RAP to be used is highly dependent on the properties of the initial RAP binder, so every case has to be independently and carefully studied. The research presented is carried out as part of the CEDR Transnational Road research Programme Call 2012 (http://allback2pave.fehrl.org) and the Marie Curie Initial Training Network action, FP7-PEOPLE-2013-ITN (http://www.superitn.eu)

    A study into the use of crumb rubber in railway ballast

    Full text link
    Ballasted track is the most common form of construction used in railway transportation due to a number of benefits in comparison with other solutions such as slab track. However, the degradation of the ballast particles and the layer settlement lead to important maintenance costs. Thus, diverse research has been carried out to develop new materials with the aim of increasing the service life of the track. To this end, the present paper focuses on the use of crumb rubber (from end-of-life tires) as elastic aggregates mixed with ballast particles, which could reduce ballast degradation and consumption of natural aggregates. At the same time, an abundant waste source is reused and the use of raw binders (proposed technique employed to bond elastic particles to ballast particles) is not necessary, which potentially reduces costs and consumption of raw materials. For this reason, the influence of different percentages of crumb rubber was studied in the laboratory using a ballast box. In addition, once the optimal quantity of rubber had been determined, its effect on ballast behaviour under high stress level was analysed. Results show that the use of 10% of crumb rubber (by volume) could reduce ballast degradation and at the same time as the capacity of the ballast layer to dissipate energy is increased and its stiffness is reduced. Additionally, based on the present laboratory study, the track settlement could be reduced with 10% rubber particles used as elastic aggregates
    corecore