In situ Functionalized Mesoporous Silicas for Sustainable Remediation Strategies in Removal of Inorganic Pollutants from Contaminated Environmental Water

Low-cost mesoporous silicas of the SBA-15 family were prepared, aimed for removal of a broad spectrum of both cationic and anionic forms of hazardous metal pollutants (Cr(III, VI), Mn(II, VII), Pb(II), Cd(II), and Cu(II)) from environmental water. Series of mono-and bifunctional materials with immobilized ethylenediaminetriacetic acid (EDTA), primary amine (NH2), and quaternary ammonium (QAS) groups were prepared in a cost-efficient one-step synthesis using two silica sources, low-cost sodium metasilicate (Na2SiO3 9H(2)O) and the conventional source-tetraethylorthosilicate (TEOS). The functionalized SBA-15 samples obtained from both silica sources were highly ordered, as evidenced by TEM and SAXS data. All obtained materials were mesoporous with high surface area values of up to 745 m(2)/g, pore volumes from 0.99 to 1.44 cm(3)/g, and narrow pore distributions near 7 nm. The adsorption affinity of the EDTA-functionalized samples followed the common order Pb(II)> Cd(II)> Cu(II)> Cr(III)> Mn(II), which could be explained based on the Pearson theory. The highest adsorption capacities were observed for samples functionalized by EDTA groups using TEOS for synthesis (TEOS/EDTA): 195.6 mg/g for Pb(II), 111.2 mg/g for Cd(II), 58.7 mg/ g for Cu(II), 57.7 mg/g for Cr(III), and 49.4 mg/g for Mn(II). Moreover, organic matter (humic acid up to 10 mg/L) and inorganic (Na(I), K(I), Mg(II), Ca(II), etc) macrocomponents present in environmental water had almost negligible effect on the removal of these cations. The NaSi/EDTA/NH2 sample revealed a better selectivity compared to the NaSi/NH2 sample towards such species as Cr(III), Mn(II), Cd(II), and Cu(II). The chromate-ions uptake at pH 7.5 by the TEOS/QAS sample turned practically unaffected by the presence of doubly charged anions (CO32-, SO42-). The content of functional groups on the surface of MS decreased only slightly (similar to 1-5%) after several regeneration cycles. The complete desorption of all heavy metal ions can be achieved using 1 mol/L EDTA solution. Reusability tests demonstrated the complete stability of the adsorbent for at least five to six consecutive adsorption/ desorption cycles with no decrease in its adsorption characteristics compared to those obtained by 0.05 mol/L HNO3 treatments. The synthesized mesoporous materials were evaluated for removal of the heavy metal ions from drinking and different natural water samples, proving their potential as sustainable, effective, and cost-efficient adsorbents

Antibacterial and photochemical properties of cellulose nanofiber-titania nanocomposites loaded with two different types of antibiotic medicines

Nanocomposite dermal drug delivery systems based on cellulose nanofibers with grafted titania nanoparticles loaded by two antibiotic medicines from different classes, i.e. tetracycline (TC) and phosphomycin (Phos), were successfully produced by a ‘‘green chemistry’’ approach in aqueous media. The influence of a different surface binding mechanism between the drug molecule and modified cellulose nanofibers on the release of the drug and, as a result, on antimicrobial properties against common pathogens Gram-positive, Staphylococcus aureus and Gram-negative Escherichia coli was investigated. The disk diffusion method and broth culture tests using varying concentrations of drugs loaded to nanocomposites were carried out to investigate the antibacterial effects. The influence of UV irradiation on the stability of the obtained nanocomposites and their antibacterial properties after irradiation were also investigated, showing enhanced stability especially for the TC loaded materials. These findings suggest that the obtained nanocomposites are promising materials for the development of potentially useful antimicrobial patches

Tyrosine residues mediate supercontraction in biomimetic spider silk

Water and humidity severely affect the material properties of spider major ampullate silk, causing the fiber to become plasticized, contract, swell and undergo torsion. Several amino acid residue types have been proposed to be involved in this process, but the complex composition of the native fiber complicates detailed investigations. Here, we observe supercontraction in biomimetically produced artificial spider silk fibers composed of defined proteins. We found experimental evidence that proline is not the sole residue responsible for supercontraction and that tyrosine residues in the amorphous regions of the silk fiber play an important role. Furthermore, we show that the response of artificial silk fibers to humidity can be tuned, which is important for the development of materials for applications in wet environments, eg producing water resistant fibers with maximal strain at break and toughness modulus

Exploiting Mass Spectrometry to Unlock the Mechanism of Nanoparticle-Induced Inflammasome Activation

Nanoparticles (NPs) elicit sterile inflammation, but the underlying signaling pathways are poorly understood. Here, we report that human monocytes are particularly vulnerable to amorphous silica NPs, as evidenced by single-cell-based analysis of peripheral blood mononuclear cells using cytometry by time-of-flight (CyToF), while silane modification of the NPs mitigated their toxicity. Using human THP-1 cells as a model, we observed cellular internalization of silica NPs by nanoscale secondary ion mass spectrometry (nanoSIMS) and this was confirmed by transmission electron microscopy. Lipid droplet accumulation was also noted in the exposed cells. Furthermore, time-of-flight secondary ion mass spectrometry (ToF-SIMS) revealed specific changes in plasma membrane lipids, including phosphatidylcholine (PC) in silica NP-exposed cells, and subsequent studies suggested that lysophosphatidylcholine (LPC) acts as a cell autonomous signal for inflammasome activation in the absence of priming with a microbial ligand. Moreover, we found that silica NPs elicited NLRP3 inflammasome activation in monocytes, whereas cell death transpired through a non-apoptotic, lipid peroxidation-dependent mechanism. Together, these data further our understanding of the mechanism of sterile inflammation

Cellulose nanofiber-titania nanocomposites as potential drug delivery systems for dermal applications

In this work, new efficient drug delivery systems based on cellulose nanofiber–titania nanocompositesgrafted with three different types of model drugs such as diclofenac sodium, penicillamine-D and phosphomycin were successfully synthesized and displayed distinctly different controlled long-term release profiles. Three different methods of medicine introduction were used to show that various interactions between TiO2 and drug molecules could be used to control the kinetics of long-term drug release. All synthesis reactions were carried out in aqueous media. The morphology, chemical structure and properties of the obtained materials were characterized by SEM, TEM and AFM microscopy, nanoparticle tracking analysis, X-ray diffraction, and TGA analysis. According to FT-IR and UV-Vis spectroscopy data, the titania binds to cellulose nanofibers via formation of ester bonds and to drug molecules via formation of surface complexes. The drug release kinetics was studied in vitro for diclofenac sodium and penicillamine-D spectrophotometrically and for phosphomycin using a radiolabeling analysis with 33P-marked ATP as a model phosphate-anchored biomolecule. The results demonstrated that the obtained nanocomposites could potentially be applied in transdermal drug delivery for anesthetics, analgesics and antibiotics