New fluoroscopic imaging technique for investigation of 6DOF knee kinematics during treadmill gait

<p>Abstract</p> <p>Introduction</p> <p>This report presents a new imaging technique for non-invasive study of six degrees of freedom (DOF) knee kinematics during treadmill gait.</p> <p>Materials and methods</p> <p>A treadmill was integrated into a dual fluoroscopic imaging system (DFIS) to formulate a gait analysis system. To demonstrate the application of the system, a healthy subject walked on the treadmill at four different speeds (1.5, 2.0, 2.5 and 3.0 MPH) while the DFIS captured the knee motion during three strides under each speed. Characters of knee joint motion were analyzed in 6DOF during the treadmill walking.</p> <p>Results</p> <p>The speed of the knee motion was lower than that of the treadmill. Flexion amplitudes increased with increasing walking speed. Motion patterns in other DOF were not affected by increase in walking speed. The motion character was repeatable under each treadmill speed.</p> <p>Conclusion</p> <p>The presented technique can be used to accurately measure the 6DOF knee kinematics at normal walking speeds.</p

Measurement of migration of a humeral head resurfacing prosthesis using radiostereometry without implant marking: An experimental study

Today, the shoulder joint is the third most commonly replaced joint after the hip and knee joints and the incidence is increasing. In Sweden, 1863 primary Shoulder Arthroplasties and 195 revisions were performed in 2017. The most common diagnoses are Osteoarthritis and irreparable tears of the rotator cuff, with or without arthropathy, often referred to as cuff tear arthropathy. Different Shoulder Arthroplasty (SA) concepts include anatomical total shoulder arthroplasty (TSA), hemiarthroplasty (HSA) and reversed shoulder arthroplasty, but also humeral head resurfacing (HHR) and stemless arthroplasties. All concepts offer pain relief, improvement of function and in quality of life for the different diagnoses. Unfortunately, there are sometimes complications after SA. They involve periprosthetic joint infection, humeral and glenoid fractures, stress shielding, loosening of the glenoid and humeral component but also glenoid erosion and cuff rupture. Some of these complications are most common within 1 year after operation, some after several years, both may lead to a revision. This, together with the fact that new designs of implants and methods of fixation of SA continues to develop, stresses the importance of continuous monitoring of implant survival and follow-up. The overall aim of this thesis was to describe clinical examples of different methods to assess the outcome after Shoulder Arthroplasty. The most common methods are clinical examination, radiographic assessment, Patient Reported Outcome Measure (PROM), National Joint registries, where revisions are an important outcome, but also Clinical Trials. All of these methods are used in one or more of the 4 papers in this thesis and shows the complexity of the topic and the practical work. In paper I we used Radio Stereometric Analysis (RSA) in an experimental set-up and concluded that marker-free RSA can be used for a humeral head resurfacing arthroplasty. In paper II we used data from the Swedish Shoulder Arthroplasty Registry (SSAR) with PROM and revisions to conclude that age is the only factor that affects revision when comparing HSA and HHR. Paper III is a long-time follow-up of a Randomized controlled study where we used radiological assessment, PROM and revisions. The conclusion was that both TSA and HSA develop severe radiological changes 10 year after primary operation. Paper IV is a prospective RSA cohort study where we also evaluated PROM and revisions. The conclusion is that HHR seems to obtain a secure fixation in the humerus, after an initial migration. But also that the prostheses shows continuous glenoid wear. The main conclusion of this thesis is that patient’s operated with SA needs continuous monitoring and several methods may be used to evaluate the outcome

Mechanical properties during healing of Achilles tendon ruptures to predict final outcome: A pilot Roentgen stereophotogrammetric analysis in 10 patients

<p>Abstract</p> <p>Background</p> <p>There are presently few methods described for in vivo monitoring of the mechanics of healing human tendon ruptures, and no methods for prediction of clinical outcome. We tested if Roentgen stereophotogrammetric analysis (RSA) can be used to follow the restoration of mechanical properties during healing of ruptured Achilles tendons, and if early measurements can predict clinical results.</p> <p>Methods</p> <p>Achilles tendon repair was studied with RSA in 10 patients with a total rupture. Tantalum beads were implanted in conjunction with surgical repair. The patients were evaluated at 6, 12 and 18 weeks, and after 1 year. RSA was performed with two different mechanical loadings, and the strain induced by increasing load was measured. The transverse area was determined by ultrasound. CT scan at 12 weeks confirmed that the tantalum beads were located within the tendons. Functional testing was done after 1 year. A heel raise index was chosen as primary clinical outcome variable.</p> <p>Results</p> <p>The strain was median 0.90, 0.32 and 0.14 percent per 100 N tendon force at 6 weeks, 18 weeks and one year respectively. The error of measurement was 0.04 percent units at 18 weeks. There was a large variation between patients, which appears to reflect biological variation. From 6 to 18 weeks, there was a negative correlation between increase in transverse area and increase in material properties, suggesting that healing is regulated at the organ level, to maximize stiffness. Modulus of elasticity during this time correlated with a heel raise index at one year (Rho = 0.76; p = 0.02).</p> <p>Conclusion</p> <p>We conclude that the RSA method might have potential for comparing different treatments of Achilles tendon ruptures.</p

The Elite-Plus stem migrates more than the flanged Charnley stem: A clinical, radiographic, and radiostereometric analysis of 114 patients with an average of 7 years follow-up

Background and purpose The Charnley Elite-Plus stem was introduced in 1993 as a presumed improvement of the flanged Charnley stem. We started this study in 1996 to investigate the migratory pattern of the Elite-Plus stem. Patients and methods We followed 114 patients with osteoarthritis and a primary total hip replacement with the Elite-Plus stem. Mean age at the time of operation was 64 (50-76) years. The mean follow-up time was 6.5 (2-7) years. Radiographs were evaluated with respect to cementing technique, migration, and wear measured by radiostereometry (RSA). Results The stem survival was 98% (CI: 96-100) at 7 years and 92% (CI: 86-97) at 10 years. Mean migration of the femoral head was 0.35 mm (SD 0.3) medially, 0.51 mm (SD 0.6) distally, and 1.1 mm (SD 1.8) in the dorsal direction. Mean total point motion was 1.7 mm (SD 1.7). The migration of the stems stabilized after 5 years in the medial and dorsal directions, but continued to subside slightly. Migration along any of the axes was higher if the cementing technique was inferior. Interpretation Patients with a Charnley Elite-Plus stem and defects in the cement mantle or other signs of inferior implantation technique should be carefully monitored

THEORETICAL RESEARCH ON THE WORKING PROCESS OF COMPLEX AGGREGATES FOR SOIL TILLAGE - REVIEW

The paper presents a summary of theoretical research developed in the country, related to the design and optimization of complex aggregates for soil processing and the improvement of their quality indices of work