3,614 research outputs found
Modeling of mass transfer and chemical reactions in a bubble column reactor using a discrete bubble model
A 3D discrete bubble model is adopted to investigate complex behavior involving hydrodynamics, mass transfer and chemical reactions in a gas-liquid bubble column reactor. In this model a continuum description is adopted for the liquid phase and additionally each individual bubble is tracked in a Lagrangian framework, while accounting for bubble-bubble and bubble-wall interactions via an encounter model. The mass transfer rate is calculated for each individual bubble using a surface renewal model accounting for the instantaneous and local properties of the liquid phase in its vicinity. The distributions in space of chemical species residing in the liquid phase are computed from the coupled species balances considering the mass transfer from bubbles and reactions between the species. The model has been applied to simulate chemisorption of CO2\ud
bubbles in NaOH solutions. Our results show that apart from hydrodynamics behavior, the model is able to predict the bubble size distribution as well as temporal and spatial variations of each chemical species involved
A Discrete Particle Simulation Study of Solids Mixing in a Pressurized Fluidized Bed
A fluidized bed containing polymeric particles is investigated using a state-of-the-art soft-sphere discrete particle model (DPM). The pressure dependency of particle mixing, flow patterns and bubble behaviour are analysed. It is found that with increasing pressure a less distinct bubble-emulsion structure and improved solids mixing can be observed
Numerical Simulation of Heat Transport in Dispersed Gas-Liquid Two-Phase Flow using a Front Tracking Approach
In this paper a simulation model is presented for the Direct Numerical Simulation (DNS) of heat transport in dispersed gas-liquid two-phase flow using the Front Tracking (FT) approach. Our model extends the FT model developed by van Sint Annaland et al. (2006) to non-isothermal conditions. In FT an unstructured dynamic mesh is used to represent and track the interface explicitly by a number of interconnected marker points. The Lagrangian representation of the interface avoids the necessity to reconstruct the interface from the local distribution of the fractions of the phases and, moreover, allows a direct and accurate calculation of the surface tension force circumventing the (problematic) computation of the interface curvature. The extended model is applied to predict the heat exchange rate between the liquid and a hot wall kept at a fixed temperature. It is found that the wall-to-liquid heat transfer coefficient exhibits a maximum in the vicinity of the bubble that can be attributed to the locally decreased thickness of the thermal boundary layer
Direct Numerical Simulation of Complex Multi-Fluid Flows Using a Combined Volume of Fluid and Immersed Boundary Method
In this paper a simulation model is presented for the Direct Numerical Simulation (DNS) of complex multi-fluid flows in which simultaneously (moving) deformable (drops or bubbles) and non-deformable (moving) elements (particles) are present, possibly with the additional presence of free surfaces. Our model combines the VOF model developed by van Sint Annaland et al. (2005) and the Immersed Boundary (IB) model developed by van der Hoef et al. (2006). The Volume of Fluid (VOF) part features i) an interface reconstruction technique based on piecewise linear interface representation ii) a three-dimensional version of the CSF model of Brackbill et al. (1992). The Immersed Boundary (IB) part incorporates both particle-fluid and particle-particle interaction via a Direct Forcing Method (DFM) and a hard sphere Discrete Particle (DP) approach. In our model a fixed (Eulerian) grid is utilized to solve the Navier-Stokes equations for the entire computational domain. The no-slip condition at the surface of the moving particles is enforced via a momentum source term which only acts in the vicinity of the particle surface. For the enforcement of the no-slip condition Lagrangian force points are used which are distributed evenly over the surface of the particle. Dissipative particle-particle and/or particle-wall collisions are accounted via a hard sphere DP approach (Hoomans et al., 1996) using a three-parameter particle-particle interaction model accounting for normal and tangential restitution and tangential friction. The capabilities of the hybrid VOF-IB model are demonstrated with a number of examples in which complex topological changes in the interface are encountered
Accuracy of bubble velocity measurement with a four-point optical fibre probe
For the operation of high void fraction bubbly flows in bubble\ud
columns, insight in primary parameters such as bubble size,\ud
shape and velocity as well as gas volume fraction is essential.\ud
At high gas volume fractions the flow system becomes\ud
opaque, ruling out non-intrusive optical techniques. As an\ud
alternative optical fibre probes can be used, which have the\ud
advantage of low cost, simplicity of setup and easy\ud
interpretation of the results.\ud
By using four-point optical fibre probe, properties of bubbles\ud
can be studied, such as bubble velocity, bubble size, etc.\ud
However, the effect of bubble wobbling behaviour and\ud
physical properties of liquids on the accuracy of the velocity\ud
measurements has not been investigated in detail.\ud
In the present study, the performance of a four-point optical\ud
fibre probe was evaluated for five different liquids. The probe\ud
performance and causes of inaccuracies are discuss
- …