Oxygen reduction in an acid medium : electrocatalysis by CoNPc(1,2) impregnated on a carbon black support; effect of loading and heat treatment

O2 reduction in an acid medium has been investigated on a transition metal macrocycle, CoNPc(1,2), impregnated on a carbon black support with a high dibutylphthalate adsorption value, using a rotating disk electrode and voltammetry techniques described previously, combined with X-ray photoelectron spectroscopy measurements. Optimal activity was found for a bilayer coverage (n = 2) at 17%-18% w/w loading. Heat treatment seems to be beneficial for n 3: it increases the overall number N of exchanged electrons and improves the electrode wetting. For the most active samples, mixed Co(II)/Co(III) valencies were displayed

Oxygen reduction in acid media: effect of iron substitution by cobalt on heat-treated naphthalocyanine impregnations supported on preselected carbon blacks

FeNPc(1.2) impregnations were investigated at various loadings using a rotating-disk electrode, voltammetry and X-ray photoelectron spectroscopy (XPS) techniques. Optimal activity takes place at monolayer coverage, and major demetallation occurs after prolonged exposure to acid solution. The substitution of Fe by Co enables the electrochemical performances to reach those presented by 10% Pt on Vulcan and stops the demetallation process. The application of fast atomic bombardment secondary ion mass spectrometry (FABS) together with XPS sheds light on the detrimental role of some electrophilic groups attached to the carbon black-catalyst interface

Oxygen reduction in acid media on supported iron naphthalocyanine: Effect of isomer configuration and pyrolysis

O2 reduction in H2SO4 medium has been investigated on FeNPc impregnations on Norit BrX by the rotating disk electrode technique. Important differences in activity and stability were found between the 1,2- and 2,3-FeNPc isomers (pyrolysed or not). XPS analyses show, for the most inactive sample, strong demetallation and nitrogen losses. This phenomenon can be attributed to the differences in flexibility between the FeNPc isomers, which influences their stabilization on the substrate

Oxygen reduction in acid media: influence of the heat treatment on the FeNPc(1–20 isomer mixture impregnated on carbon blacks and active charcoals

Oxygen reduction with the aid of a number of FeNPc(1–2) impregnated carbon supports in sulphuric acid solutions has been investigated.\ud \ud Loading of the carbon samples amounted to about 10 wt.%. After a 10 day stay in the aerated solutions the samples were investigated with rotating disk electrode and X-ray photoelectron spectroscopy techniques. The most active and stable samples correspond to mono- or submonolayers of FeNPc deposited on high dibutylphthalate adsorption carbon blacks. Comparison with data obtained previously on Norit BrX impregnations emphasizes the rôle of the electron density on the inner nitrogen atoms rather than that on the iron centres

Wet-Chemical Synthesis of 3D Stacked Thin Film Metal-Oxides for All-Solid-State Li-Ion Batteries.

By ultrasonic spray deposition of precursors, conformal deposition on 3D surfaces of tungsten oxide (WO₃) negative electrode and amorphous lithium lanthanum titanium oxide (LLT) solid-electrolyte has been achieved as well as an all-solid-state half-cell. Electrochemical activity was achieved of the WO₃ layers, annealed at temperatures of 500 °C. Galvanostatic measurements show a volumetric capacity (415 mAh·cm-3) of the deposited electrode material. In addition, electrochemical activity was shown for half-cells, created by coating WO₃ with LLT as the solid-state electrolyte. The electron blocking properties of the LLT solid-electrolyte was shown by ferrocene reduction. 3D depositions were done on various micro-sized Si template structures, showing fully covering coatings of both WO₃ and LLT. Finally, the thermal budget required for WO₃ layer deposition was minimized, which enabled attaining active WO₃ on 3D TiN/Si micro-cylinders. A 2.6-fold capacity increase for the 3D-structured WO₃ was shown, with the same current density per coated area

Halfvortices in flat nanomagnets

We discuss a new type of topological defect in XY systems where the O(2) symmetry is broken in the presence of a boundary. Of particular interest is the appearance of such defects in nanomagnets with a planar geometry. They are manifested as kinks of magnetization along the edge and can be viewed as halfvortices with winding numbers \pm 1/2. We argue that halfvortices play a role equally important to that of ordinary vortices in the statics and dynamics of flat nanomagnets. Domain walls found in experiments and numerical simulations are composite objects containing two or more of these elementary defects. We also discuss a closely related system: the two-dimensional smectic liquid crystal films with planar boundary condition.Comment: 7 pages, 8 figures, To appear as a chapter in Les Houches summer school on Quantum Magnetis